% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
% For further copyright information, and conditions for modification
% and distribution, see the file legal.txt, and any other copyright
% notices in this file.
%
% This file is part of the LaTeX2e system.
% ----------------------------------------
% This system is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
%
% For error reports concerning UNCHANGED versions of this file no
% more than one year old, see bugs.txt.
%
% Please do not request updates from us directly. Primary
% distribution is through the CTAN archives.
%
%
% IMPORTANT COPYRIGHT NOTICE:
%
% You are NOT ALLOWED to distribute this file alone.
%
% You are allowed to distribute this file under the condition that it
% is distributed together with all the files listed in manifest.txt.
%
% If you receive only some of these files from someone, complain!
%
%
% Permission is granted to copy this file to another file with a
% clearly different name and to customize the declarations in that
% copy to serve the needs of your installation, provided that you
% comply with the conditions in the file legal.txt.
%
% However, NO PERMISSION is granted to produce or to distribute a
% modified version of this file under its original name.
%
% You are NOT ALLOWED to change this file.
%
%
%
% \fi
%
% \iffalse
%%% From File: ltclass.dtx
%
%<*driver>
% \fi
\ProvidesFile{ltclass.dtx}
[1998/05/07 v1.1b LaTeX Kernel (Class & Package Interface)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltclass.dtx}
\begin{document}
\title{The main structure of documents}
\author{Frank Mittelbach\and Chris Rowley\and Alan Jeffrey\and
David Carlisle}
\date{\filedate}
\maketitle
\DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \iffalse
% (C) Copyright Frank Mittelbach, Chris Rowley,
% Alan Jeffrey and David Carlisle 1993-1998.
% All rights reserved.
% \fi
%
% \CheckSum{1185}
%
% \changes{v1.0f}{1994/05/22}{Use new warning and error commands}
% \changes{v1.0l}{1994/11/17}{\cs{@tempa} to \cs{reserved@a}}
% \changes{v1.0z}{1998/03/21}{Added to documentation of filecontents}
%
% \section{Introduction}
%
% This file implements the following declarations, which replace
% |\documentstyle| in \LaTeXe\ documents.
%
% Note that old documents containing |\documentstyle| will be run using
% a compatibility option---thus keeping everyone happy, we hope!
%
% The overall idea is that there are two types of `style files':
% `class files' which define elements and provide a default formatting
% for them; and `packages' which provide extra functionality. One
% difference between \LaTeXe\ and \LaTeX2.09 is that \LaTeXe\ packages
% may have options. Note that options to classes packages may be
% implemented such that they input files, but these file names are not
% necessarily directly related to the option name.
%
% \section{User interface}
%
% |\documentclass[|\meta{main-option-list}|]{|^^A
% \meta{class}|}[|\meta{version}|]|
%
% There must be exactly one such declaration, and it must come first.
% The \meta{main-option-list} is a list of options which can modify the
% formatting of elements which are defined in the \meta{class} file
% as well as in all following |\usepackage| declarations (see below).
% The \meta{version} is a version number, beginning with a date in the
% format |YYYY/MM/DD|. If an older version of the class is found, a
% warning is issued.
%
% \bigskip
%
% |\documentstyle[|\meta{main-option-list}|]{|^^A
% \meta{class}|}[|\meta{version}|]|
%
% The |\documentstyle| declaration is kept in order to maintain upward
% compatibility with \LaTeX2.09 documents. It is similar to
% |\documentclass|, but it causes all options in
% \meta{main-option-list} that the \meta{class} does not use to be
% passed to |\RequirePackage| after the options have been processed.
% This maintains compatibility with the 2.09 behaviour. Also a flag is
% set to indicate that the document is to be processed in \LaTeX2.09
% compatibility mode. As far as most packages are concerned, this
% only affects the warnings and errors \LaTeX\ generates. This flag
% does affect the definition of font commands, and |\sloppy|.
%
% \bigskip
%
% |\usepackage[|\meta{package-option-list}|]{|^^A
% \meta{package-list}|}[|\meta{version}|]|
%
% There can be any number of these declarations. All packages in
% \meta{package-list} are called with the same options.
%
% Each \meta{package} file defines new elements (or modifies those
% defined in the \meta{class}), and thus extends the range of documents
% which can be processed.
% The \meta{package-option-list} is a list of options which can modify
% the formatting of elements defined in the \meta{package} file.
% The \meta{version} is a version number, beginning with a date in the
% format |YYYY/MM/DD|. If an older version of the package is found, a
% warning is issued.
%
% Each package is loaded only once. If the same package is requested
% more than once, nothing happens, unless the package has been requested
% with options that were not given the first time it was loaded, in
% which case an error is produced.
%
% As well as processing the options given in the
% \meta{package-option-list}, each package processes the
% \meta{main-option-list}. This means that options that affect all
% of the packages can be given globally, rather than repeated for every
% package.
%
% Note that class files have the extension |.cls|, packages have the
% extension |.sty|.
%
% \DescribeEnv{filecontents}
% The environment |filecontents| is intended for passing the contents
% of packages, options, or other files along with a document in a
% single file.
% It has one argument, which is the name of the file to create. If that
% file already exists (maybe only in the current directory if the OS
% supports a notion of a `current directory' or `default directory')
% then nothing happens
% (except for an information message) and the body of the environment
% is bypassed. Otherwise, the body of the environment is written
% verbatim to the file name given as the first argument, together with
% some comments about how it was produced.
%
% The environment is allowed only before |\documentclass| to ensure
% that all packages or options necessary for this particular run are
% present when needed. The begin and end tags should each be on a
% line by itself. There is also a star-form; this does not write
% extra comments into the file.
%
% \subsection{Option processing}
%
% When the options are processed, they are divided into two types: {\em
% local\/} and {\em global}:
% \begin{itemize}
%
% \item For a class, the options in the |\documentclass| command are
% local.
%
% \item For a package, the options in the |\usepackage| command are
% local, and the options in the |\documentclass| command are global.
%
% \end{itemize}
% The options for |\documentclass| and |\usepackage|
% are processed in the following way:
% \begin{enumerate}
%
% \item The local and global options that have been declared
% (using |\DeclareOption| as described below) are processed
% first.
%
% In the case of |\ProcessOptions|, they are processed in the order
% that they were declared in the class or package.
%
% In the case of |\ProcessOptions*|, they are processed in the order
% that they appear in the option-lists. First the global options, and
% then the local ones.
%
% \item Any remaining local options are dealt with using the default
% option (declared using the |\DeclareOption*| declaration described
% below). For document classes, this usually does nothing, but
% records the option on a list of unused options.
% For packages, this usually produces an error.
%
% \end{enumerate}
% Finally, when |\begin{document}| is reached, if there are any global
% options which have not been used by either the class or any package,
% the system will produce a warning.
%
%
% \section{Class and Package interface}
%
% \subsection{Class name and version}
%
% \DescribeMacro\ProvidesClass
% A class can identify itself with the
% |\ProvidesClass{|\meta{name}|}[|\meta{version}|]| command. The
% \meta{version} should begin with a date in the format |YYYY/MM/DD|.
%
% \subsection{Package name and version}
%
% \DescribeMacro\ProvidesPackage
% A package can identify itself with the
% |\ProvidesPackage|\marg{name}\oarg{version} command. The
% \meta{version} should begin with a date in the format |YYYY/MM/DD|.
%
% \subsection{Requiring other packages}
%
% \DescribeMacro\RequirePackage
% Packages or classes can load other packages using\\
% |\RequirePackage|\oarg{options}\marg{name}\oarg{version}.\\
% If the package has already been loaded, then nothing happens unless
% the requested options are not a subset of the options with which it
% was loaded, in which case an error is called.
%
% \DescribeMacro\LoadClass
% Similar to |\RequirePackage|, but for classes, may not be used in
% package files.
%
% \DescribeMacro\PassOptionsToPackage
% Packages can pass options to other packages using:\\
% |\PassOptionsToPackage{|\meta{options}|}{|\meta{package}|}|.\\
% \DescribeMacro\PassOptionsToClass
% This adds the \meta{options} to the options list of any future
% |\RequirePackage| or |\usepackage| command. For example:
% \begin{verbatim}
% \PassOptionsToPackage{foo,bar}{fred}
% \RequirePackage[baz]{fred}\end{verbatim}
% is the same as:
% \begin{verbatim}
% \RequirePackage[foo,bar,baz]{fred}\end{verbatim}
%
% \DescribeMacro\LoadClassWithOptions
% |\LoadClassWithOptions|\marg{name}\oarg{version}:\\
% This is similar to
% |\LoadClass|, but it always calls class \meta{name} with
% exactly the same option list that is being used by the current class,
% rather than an option explicitly supplied or passed on by
% |\PassOptionsToClass|.
% \DescribeMacro\RequirePackageWithOptions
% |\RequirePackageWithOptions| is the analogous command for packages.
%
% This is mainly intended to allow one class to simply build on another,
% for example:
%\begin{verbatim}
% \LoadClassWithOptions{article}
%\end{verbatim}
%
% This should be contrasted with the slightly different construction
%\begin{verbatim}
% \DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
% \ProcessOptions
% \LoadClass{article}
%\end{verbatim}
%
% As used here, the effects are more or less the same, but the
% version using |\LoadClassWithOptions| is slightly quicker
% (and less to type).
% If, however, the class declares options of its own then
% the two constructions are different; compare, for example:
%\begin{verbatim}
% \DeclareOption{landscape}{...}
% \ProcessOptions
% \LoadClassWithOptions{article}
%\end{verbatim}
% with:
%\begin{verbatim}
% \DeclareOption{landscape}{...}
% \DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
% \ProcessOptions
% \LoadClass{article}
%\end{verbatim}
% In the first case, the \textsf{article} class will be called with
% option |landscape| precisely when the current class is called with
% this option; but in the second example it will
% not as in that case \textsf{article} is only passed options by the
% default option handler, which is not used for |landscape| as that
% option is explicitly declared.
%
% \DescribeMacro\@ifpackageloaded
% To find out if a package has already been loaded, use\\
% \DescribeMacro\@ifclassloaded
% |\@ifpackageloaded{|\meta{package}|}{|\meta{true}|}{|\meta{false}|}|.
%
% \DescribeMacro\@ifpackagelater
% To find out if a package has already been loaded with a version more
% recent than \meta{version}, use
% \DescribeMacro\@ifclasslater
% |\@ifpackagelater{|\meta{package}|}{|\meta{version}|}{|^^A
% \meta{true}|}{|\meta{false}|}|.
%
% \DescribeMacro\@ifpackagewith
% To find out if a package has already been loaded with at least the
% options \meta{options}, use
% \DescribeMacro\@ifclasswith
% |\@ifpackagewith{|\meta{package}|}{|\meta{options}|}{|^^A
% \meta{true}|}{|\meta{false}|}|.
%
% \subsection{Declaring new options}
%
% Options for classes and packages are built using the same macros.
%
% \DescribeMacro\DeclareOption To define a builtin option, use
% |\DeclareOption{|\meta{name}|}{|\meta{code}|}|.
%
% \DescribeMacro{\DeclareOption*} To define the default action to
% perform for local options which have not been declared, use
% |\DeclareOption*{|\meta{code}|}|.
%
% {\em Note\/}: there should be no use of\\
% |\RequirePackage|, |\DeclareOption|, |\DeclareOption*| or
% |\ProcessOptions|\\
% inside |\DeclareOption| or |\DeclareOption*|.
%
% Possible uses for |\DeclareOption*| include:
%
% |\DeclareOption*{}|\\
% Do nothing. Silently accept unknown options. (This suppresses the
% usual warnings.)
%
% |\DeclareOption*{\@unkownoptionerror}|\\
% Complain about unknown local options. (The initial setting for
% package files.)
%
% |\DeclareOption*{\PassOptionsToPackage{\CurrentOption}|^^A
% |{|\meta{pkg-name}|}|\\
% Handle the the current option by passing it on to the package
% \meta{pkg-name}, which will presumably be loaded via
% |\RequirePackage| later in the file. This is useful for building
% `extension' packages, that perhaps handle a couple of new options,
% but then pass everything else on to an existing package.
%
% |\DeclareOption*{\InputIfFileExists{xx-\CurrentOption.yyy}%|\\
% | {}%|\\
% | {\OptionNotUsed}}|\\
% Handle the option foo by loading the file |xx-foo.yyy| if it
% exists, otherwise do nothing, but declare that the option was not
% used.
% Actually the |\OptionNotUsed| declaration is only needed if this is
% being used in class files, but does no harm in package files.
%
%
% \subsection{Safe Input Macros}
% \DescribeMacro{\InputIfFileExists}
% |\InputIfFileExists{|\meta{file}|}{|\meta{then}|}{|\meta{else}|}|\\
% Inputs \meta{file} if it exists. Immediately before the input,
% \meta{then} is executed. Otherwise \meta{else} is executed.
%
% \DescribeMacro{\IfFileExists}
% As above, but does not input the file.
%
% One thing you might like to put in the \meta{else} clause is
%
% \DescribeMacro{\@missingfileerror}
% This starts an interactive request for a filename, supplying default
% extensions. Just hitting return causes the whole input to be skipped
% and entering |x| quits the current run,
%
% \DescribeMacro{\input}
% This has been redefined from the \LaTeX2.09 definition, in terms of
% the new commands |\InputIfFileExists| and |\@missingfileerror|.
%
%
% \DescribeMacro{\listfiles} Giving this declaration in the preamble
% causes a list of all files input via the `safe input' commands to be
% listed at the end. Any strings specified in the optional argument to
% |\ProvidesPackage| are listed alongside the file name. So files in
% standard (and other non-standard) distributions can put informative
% strings in this argument.
%
% \StopEventually{}
%
% \section{Implementation}
%
% \begin{macrocode}
%<*2ekernel>
% \end{macrocode}
%
%
% \changes{v0.2g}{1993/11/23}
% {Various macros now moved to latex.tex.}
% \changes{v0.2g}{1993/11/23}
% {Warnings and errors now directly coded.}
% \changes{v0.2h}{1993/11/28}
% {Primitive filenames now terminated by space not \cmd\relax.}
% \changes{v0.2h}{1993/11/28}
% {Directory syntax checing moved to dircheck.dtx}
% \changes{v0.2h}{1993/11/28}
% {Assorted commands now in the kernel removed.}
% \changes{v0.2i}{1993/12/03}
% {\cs{@onlypreamble}: Many commands declared.}
% \changes{v0.2i}{1993/12/03}
% {Removed obsolete \cmd{\@documentclass}}
% \changes{v0.2o}{1993/12/13}
% {Removed setting \cmd\errcontextlines\ (now in latex.tex)}
% \changes{v0.2p}{1993/12/15}
% {Removed extra `.'s from \cmd{\@@warning}s}
% \changes{v0.2s}{1994/01/17}
% {Added many more \cmd{\@onlypreamble} commands}
% \changes{v0.2s}{1994/01/17}
% {Wrapped long lines to column 72}
% \changes{v0.3a}{1994/03/02}
% {Remove need for driver file}
% \changes{v0.3b}{1994/03/08}
% {Modify driver code into `new style'}
% \changes{v0.3c}{1994/03/12}
% {Change name from docclass to ltclass}
% \changes{v0.3h}{1994/04/25}
% {Removed spurious extra `.'s at the end of error messages}
% \changes{v1.0a}{1994/04/29}
% {Change version number to 1 (no other change)}
% \changes{v1.0k}{1994/11/03}
% {Move \cs{@missingfileerror} to ltfiles}
%
% \begin{macro}{\if@compatibility}
% The flag for compatibilty mode.
% \begin{macrocode}
\newif\if@compatibility
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@documentclasshook}
% The hook called after the first |\documentclass| command. By
% default this checks to see if |\@normalsize| is undefined, and if
% so, sets it to |\normalsize|.
% \changes{v0.2q}{1993/12/17}
% {Macro added}
% \changes{v0.2z}{1994/02/10}
% {Changed the name from \cmd{\@compatibility} to
% \cmd{\@documentclasshook}, and added the check for whether
% \cmd{\@normalsize} has been defined. ASAJ.}
% \begin{macrocode}
\def\@documentclasshook{%
\ifx\@normalsize\@undefined
\let\@normalsize\normalsize
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@declaredoptions}
% This list is automatically built by |\DeclareOption|.
% It is the list of options (separated by commas) declared in
% the class or package file and it defines the order in which the
% the corresponding |\ds@|\meta{option} commands are executed.
% All local \meta{option}s which are not declared will be processed
% in the order defined by the optional argument of |\documentclass|
% or |\usepackage|.
% \begin{macrocode}
\let\@declaredoptions\@empty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@classoptionslist}
% List of options of the main class.
% \changes{v1.0u}{1996/07/26}{made only preamble}
% \begin{macrocode}
\let\@classoptionslist\relax
\@onlypreamble\@classoptionslist
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@unusedoptionlist}
% \changes{v1.0u}{1996/07/26}{made only preamble}
% List of options of the main class that haven't been declared or
% loaded as class option files.
% \begin{macrocode}
\let\@unusedoptionlist\@empty
\@onlypreamble\@unusedoptionlist
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\CurrentOption}
% Name of current package or option.
% \changes{v0.2c}{1993/11/17}
% {Name changed from \cs{@curroption}}
% \begin{macrocode}
\let\CurrentOption\@empty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@currname}
% Name of current package or option.
% \begin{macrocode}
\let\@currname\@empty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@currext}
% The current file extension.
% \changes{v0.2a}{1993/11/14}{Name changed from \cmd{\@currextension}}
% \begin{macrocode}
\global\let\@currext=\@empty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@clsextension}
% \begin{macro}{\@pkgextension}
% The two possible values of |\@currext|.
% \begin{macrocode}
\def\@clsextension{cls}
\def\@pkgextension{sty}
\@onlypreamble\@clsextension
\@onlypreamble\@pkgextension
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@pushfilename}
% \begin{macro}{\@popfilename}
% \begin{macro}{\@currnamestack}
% Commands to push and pop the file name and extension. \\
% |#1| current name. \\
% |#2| current extension. \\
% |#3| current catcode of |@|. \\
% |#4| Rest of the stack.
% \begin{macrocode}
\def\@pushfilename{%
\xdef\@currnamestack{%
{\@currname}%
{\@currext}%
{\the\catcode`\@}%
\@currnamestack}}
\@onlypreamble\@pushfilename
% \end{macrocode}
%
% \begin{macrocode}
\def\@popfilename{\expandafter\@p@pfilename\@currnamestack\@nil}
\@onlypreamble\@popfilename
% \end{macrocode}
%
% \begin{macrocode}
\def\@p@pfilename#1#2#3#4\@nil{%
\gdef\@currname{#1}%
\gdef\@currext{#2}%
\catcode`\@#3\relax
\gdef\@currnamestack{#4}}
\@onlypreamble\@p@pfilename
% \end{macrocode}
%
% \begin{macrocode}
\gdef\@currnamestack{}
\@onlypreamble\@currnamestack
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ptionlist}
% Returns the option list of the file.
% \begin{macrocode}
\def\@ptionlist#1{%
\@ifundefined{opt@#1}\@empty{\csname opt@#1\endcsname}}
\@onlypreamble\@ptionlist
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@ifpackageloaded}
% \begin{macro}{\@ifclassloaded}
% |\@ifpackageloaded{|\meta{name}|}|
% Checks to see whether a file has been loaded.
% \changes{v0.2t}{1994/01/18}
% {Fix typo \cmd{\@pkgetension}}
% \begin{macrocode}
\def\@ifpackageloaded{\@ifl@aded\@pkgextension}
\def\@ifclassloaded{\@ifl@aded\@clsextension}
\@onlypreamble\@ifpackageloaded
\@onlypreamble\@ifclassloaded
% \end{macrocode}
%
% \begin{macrocode}
\def\@ifl@aded#1#2{%
\expandafter\ifx\csname ver@#2.#1\endcsname\relax
\expandafter\@secondoftwo
\else
\expandafter\@firstoftwo
\fi}
\@onlypreamble\@ifl@aded
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ifpackagelater}
% \begin{macro}{\@ifclasslater}
% |\@ifpackagelater{|\meta{name}|}{YYYY/MM/DD}|
% Checks that the package loaded is more recent than the given date.
% \begin{macrocode}
\def\@ifpackagelater{\@ifl@ter\@pkgextension}
\def\@ifclasslater{\@ifl@ter\@clsextension}
\@onlypreamble\@ifpackagelater
\@onlypreamble\@ifclasslater
% \end{macrocode}
%
% \begin{macrocode}
\def\@ifl@ter#1#2{%
\expandafter\@ifl@t@r
\csname ver@#2.#1\endcsname}
\@onlypreamble\@ifl@ter
% \end{macrocode}
%
% This internal macro is also used in |\NeedsTeXFormat|.
% \changes{v0.2f}{1993/11/22}
% {Added //00 so parsing never produces a runaway argument.}
% \begin{macrocode}
\def\@ifl@t@r#1#2{%
\ifnum\expandafter\@parse@version#1//00\@nil<%
\expandafter\@parse@version#2//00\@nil
\expandafter\@secondoftwo
\else
\expandafter\@firstoftwo
\fi}
\@onlypreamble\@ifl@t@r
% \end{macrocode}
%
% \begin{macrocode}
\def\@parse@version#1/#2/#3#4#5\@nil{#1#2#3#4 }
\@onlypreamble\@parse@version
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ifpackagewith}
% \begin{macro}{\@ifclasswith}
% |\@ifpackagewith{|\meta{name}|}{|\meta{option-list}|}|
% Checks that \meta{option-list} is a subset of the options
% \textbf{with} which \meta{name} was loaded.
% \begin{macrocode}
\def\@ifpackagewith{\@if@ptions\@pkgextension}
\def\@ifclasswith{\@if@ptions\@clsextension}
\@onlypreamble\@ifpackagewith
\@onlypreamble\@ifclasswith
% \end{macrocode}
%
% \begin{macrocode}
\def\@if@ptions#1#2{%
\@expandtwoargs\@if@pti@ns{\@ptionlist{#2.#1}}}
\@onlypreamble\@if@ptions
% \end{macrocode}
%
% Probably shouldnt use |\CurrentOption| here\ldots (changed to
% |\reserved@b|.)
% \changes{v0.2y}{1994/02/07}
% {Add extra ,s so `two' is not matched with `twocolumn'}
% \begin{macrocode}
\def\@if@pti@ns#1#2{%
\let\reserved@a\@firstoftwo
\@for\reserved@b:=#2\do{%
\expandafter\in@\expandafter{\expandafter,\reserved@b,}{,#1,}%
\ifin@\else\let\reserved@a\@secondoftwo\fi}%
\reserved@a}
\@onlypreamble\@if@pti@ns
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\ProvidesPackage}
% Checks that the current filename is correct, and defines
% |\ver@filename|.
% \changes{v0.3c}{1994/03/12}
% {Add \cmd{\wlog}}
% \changes{v0.3c}{1994/03/12}
% {use \cmd{\@gtempa}}
% \begin{macrocode}
\def\ProvidesPackage#1{%
\xdef\@gtempa{#1}%
\ifx\@gtempa\@currname\else
\@latex@warning@no@line{You have requested
\@cls@pkg\space`\@currname',\MessageBreak
but the \@cls@pkg\space provides `#1'}%
\fi
\@ifnextchar[\@pr@videpackage{\@pr@videpackage[]}}%]
\@onlypreamble\ProvidesPackage
% \end{macrocode}
%
% \begin{macrocode}
\def\@pr@videpackage[#1]{%
\expandafter\xdef\csname ver@\@currname.\@currext\endcsname{#1}%
\ifx\@currext\@clsextension
\typeout{Document Class: \@gtempa\space#1}%
\else
\wlog{Package: \@gtempa\space#1}%
\fi}
\@onlypreamble\@pr@videpackage
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProvidesClass}
% Like |\ProvidesPackage|, but for classes.
% \begin{macrocode}
\let\ProvidesClass\ProvidesPackage
\@onlypreamble\ProvidesClass
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProvidesFile}
% Like |\ProvidesPackage|, but for arbitrary files. Do not apply
% |\@onlypreamble| to these, as we may want to label files input
% during the document.
% \changes{v0.2l}{1993/12/07}
% {Macro added}
% \changes{v0.3c}{1994/03/12}
% {Add \cmd{\wlog}}
% \changes{v0.3g}{1994/04/11}
% {Protect against weird catcodes.}
% \begin{macro}{\@providesfile}
% \changes{v1.0r}{1995/10/17}
% {Delay definition of \cs{ProvidesFile} till ltfinal}
% \changes{v1.1a}{1998/03/21}
% {Allow \&. Internal/2702}
% \begin{macrocode}
\def\ProvidesFile#1{%
\begingroup
\catcode`\ 10 %
\@makeother\/%
\@makeother\&%
\@ifnextchar[{\@providesfile{#1}}{\@providesfile{#1}[]}}
% \end{macrocode}
%
% During initex a special version of |\@providesfile| is used.
% The real definition is installed right at the end, in |ltfinal.dtx|.
%\begin{verbatim}
%\def\@providesfile#1[#2]{%
% \wlog{File: #1 #2}%
% \expandafter\xdef\csname ver@#1\endcsname{#2}%
% \endgroup}
% \end{macrocode}
%\end{verbatim}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\PassOptionsToPackage}
% \begin{macro}{\PassOptionsToClass}
% If the package has been loaded, we check that it was first loaded with
% the options. Otherwise we add the option list to that of the package.
% \begin{macrocode}
\def\@pass@ptions#1#2#3{%
\expandafter\xdef\csname opt@#3.#1\endcsname{%
\@ifundefined{opt@#3.#1}\@empty
{\csname opt@#3.#1\endcsname,}%
\zap@space#2 \@empty}}
\@onlypreamble\@pass@ptions
% \end{macrocode}
%
% \begin{macrocode}
\def\PassOptionsToPackage{\@pass@ptions\@pkgextension}
\def\PassOptionsToClass{\@pass@ptions\@clsextension}
\@onlypreamble\PassOptionsToPackage
\@onlypreamble\PassOptionsToClass
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\DeclareOption}
% \begin{macro}{\DeclareOption*}
% Adds an option as a |\ds@| command, or the default |\default@ds|
% command.
% \changes{v0.2c}{1993/11/17}
% {Error checking added}
% \changes{v1.0m}{1995/04/21}
% {Made long /1498}
% \changes{v1.0n}{1995/05/12}
% {Use \cs{toks@} to remove need to double hash /1557}
% \begin{macrocode}
\def\DeclareOption{%
\let\@fileswith@pti@ns\@badrequireerror
\@ifstar\@defdefault@ds\@declareoption}
\long\def\@declareoption#1#2{%
\xdef\@declaredoptions{\@declaredoptions,#1}%
\toks@{#2}%
\expandafter\edef\csname ds@#1\endcsname{\the\toks@}}
\long\def\@defdefault@ds#1{%
\toks@{#1}%
\edef\default@ds{\the\toks@}}
\@onlypreamble\DeclareOption
\@onlypreamble\@declareoption
\@onlypreamble\@defdefault@ds
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\OptionNotUsed}
% If we are in a class file, add |\CurrentOption| to the list of
% unused options. Otherwise, in a package file do nothing.
% \begin{macrocode}
\def\OptionNotUsed{%
\ifx\@currext\@clsextension
\xdef\@unusedoptionlist{%
\ifx\@unusedoptionlist\@empty\else\@unusedoptionlist,\fi
\CurrentOption}%
\fi}
\@onlypreamble\OptionNotUsed
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\default@ds}
% The default default option code.
% Set by |\@onefilewithoptions| to either |\OptionNotUsed| for
% classes, or |\@unknownoptionerror| for packages. This may be reset
% in either case with |\DeclareOption*|.
% \begin{macrocode}
% \let\default@ds\OptionNotUsed
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProcessOptions}
% \begin{macro}{\ProcessOptions*}
% |\ProcessOptions| calls |\ds@option| for each known package option,
% then calls |\default@ds| for each option on the local options list.
% Finally resets all the declared options to |\relax|. The empty option
% does nothing, this has to be reset on the off chance it's set to
% |\relax| if an empty element gets into the |\@declaredoptions| list.
%
% The star form is similar but executes options given in the order
% specified in the document, not the order they are declared in the
% file. In the case of packages, global options are executed before
% local ones.
% \changes{v0.2a}{1993/11/14}
% {Stop adding the global option list inside class files.}
% \changes{v0.2a}{1993/11/14}
% {Optimise `empty option' code.}
% \changes{v0.2b}{1993/11/15}
% {Star form added.}
% \changes{v0.2c}{1993/11/17}
% {restoring \cmd{\@fileswith@pti@ns} added.}
% \begin{macrocode}
\def\ProcessOptions{%
\let\ds@\@empty
\edef\@curroptions{\@ptionlist{\@currname.\@currext}}%
\@ifstar\@xprocess@ptions\@process@ptions}
\@onlypreamble\ProcessOptions
% \end{macrocode}
%
% \changes{v0.2y}{1994/02/07}
% {Add extra ,s so `two' is not matched with `twocolumn'}
% \begin{macrocode}
\def\@process@ptions{%
\@for\CurrentOption:=\@declaredoptions\do{%
\ifx\CurrentOption\@empty\else
\@expandtwoargs\in@{,\CurrentOption,}{%
,\ifx\@currext\@clsextension\else\@classoptionslist,\fi
\@curroptions,}%
\ifin@
\@use@ption
\expandafter\let\csname ds@\CurrentOption\endcsname\@empty
\fi
\fi}%
\@process@pti@ns}
\@onlypreamble\@process@ptions
% \end{macrocode}
%
% \changes{v0.2y}{1994/02/07}
% {Add extra ,s so `two' is not matched with `twocolumn'}
% \begin{macrocode}
\def\@xprocess@ptions{%
\ifx\@currext\@clsextension\else
\@for\CurrentOption:=\@classoptionslist\do{%
\ifx\CurrentOption\@empty\else
\@expandtwoargs\in@{,\CurrentOption,}{,\@declaredoptions,}%
\ifin@
\@use@ption
\expandafter\let\csname ds@\CurrentOption\endcsname\@empty
\fi
\fi}%
\fi
\@process@pti@ns}
\@onlypreamble\@xprocess@ptions
% \end{macrocode}
%
% The common part of |\ProcessOptions| and |\ProcessOptions*|.
% \begin{macrocode}
\def\@process@pti@ns{%
\@for\CurrentOption:=\@curroptions\do{%
\@ifundefined{ds@\CurrentOption}%
{\@use@ption
\default@ds}%
% \end{macrocode}
% There should not be any non-empty definition of |\CurrentOption| at
% this point, as all the declared options were executed earlier. This is
% for compatibility with 2.09 styles which use |\def\ds@|\ldots\
% directly, and so have options which do not appear in
% |\@declaredoptions|.
% \begin{macrocode}
\@use@ption}%
% \end{macrocode}
% Clear all the definitions for option code. First set all the declared
% options to |\relax|, then reset the `default' and `empty' options. and
% the lst of declared options.
% \begin{macrocode}
\@for\CurrentOption:=\@declaredoptions\do{%
\expandafter\let\csname ds@\CurrentOption\endcsname\relax}%
% \end{macrocode}
% \changes{v1.0r}{1995/10/17}
% {Reset \cs{CurrentOption} for graphics/1873}
% \begin{macrocode}
\let\CurrentOption\@empty
\let\@fileswith@pti@ns\@@fileswith@pti@ns
\AtEndOfPackage{\let\@unprocessedoptions\relax}}
\@onlypreamble\@process@pti@ns
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@options}
% |\@options| is a synonym for |\ProcessOptions*| for upward
% compatibility with \LaTeX2.09 style files.
% \begin{macrocode}
\def\@options{\ProcessOptions*}
\@onlypreamble\@options
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@use@ption}
% Execute the code for the current option.
% \changes{v0.2g}{1993/11/23}
% {Name changed from \cmd{\@executeoption}}
% \changes{v1.0e}{1994/05/17}
% {Execute option after removing from list, not before}
% \begin{macrocode}
\def\@use@ption{%
\@expandtwoargs\@removeelement\CurrentOption
\@unusedoptionlist\@unusedoptionlist
\csname ds@\CurrentOption\endcsname}
\@onlypreamble\@use@ption
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ExecuteOptions}
% |\ExecuteOptions{|\meta{option-list}|}| executes the code declared
% for each option.
% \changes{v0.2d}{1993/11/18}
% {Use \cmd{\CurrentOption} not\cmd{\reserved@a}}
% \changes{v0.2k}{1993/12/06}
% {Preserve \cmd\CurrentOption}
% \begin{macrocode}
\def\ExecuteOptions#1{%
\def\reserved@a##1\@nil{%
\@for\CurrentOption:=#1\do{\csname ds@\CurrentOption\endcsname}%
\edef\CurrentOption{##1}}%
\expandafter\reserved@a\CurrentOption\@nil}
\@onlypreamble\ExecuteOptions
% \end{macrocode}
% \end{macro}
%
% The top-level commands, which just set some parameters then call
% the internal command, |\@fileswithoptions|.
% \begin{macro}{\documentclass}
% \changes{v1.0q}{1995/06/19}
% {Dont redefine \cs{usepackage} in compat mode for /1634}
% The main new-style class declaration.
% \begin{macrocode}
\def\documentclass{%
\let\documentclass\@twoclasseserror
\if@compatibility\else\let\usepackage\RequirePackage\fi
\@fileswithoptions\@clsextension}
\@onlypreamble\documentclass
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\documentstyle}
% 2.09 style class `style' declaration.
% \changes{v0.2a}{1993/11/14}
% {Added \cs{RequirePackage} \cs{@unusedoptionlist} stuff.}
% \changes{v0.2b}{1993/11/15}
% {Modified to match \cmd{\ProcessOption*}}
% \changes{v0.2d}{1993/11/18}
% {Modified \cmd\RequirePackage\ stuff.}
% \changes{v0.2n}{1993/12/09}
% {input 209 compatibility file.}
% \changes{v0.2o}{1993/12/13}
% {compatibility file now latex209.sty.}
% \changes{v0.2q}{1993/12/17}
% {Match Alan's new code.}
% \changes{v0.2u}{1994/01/21}
% {compatibility file now latex209.def.}
% \begin{macrocode}
\def\documentstyle{%
\makeatletter\input{latex209.def}\makeatother
\documentclass}
\@onlypreamble\documentstyle
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\RequirePackage}
% Load package if not already loaded.
% \begin{macrocode}
\def\RequirePackage{%
\@fileswithoptions\@pkgextension}
\@onlypreamble\RequirePackage
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LoadClass}
% Load class.
% \begin{macrocode}
\def\LoadClass{%
\ifx\@currext\@pkgextension
\@latex@error
{\noexpand\LoadClass in package file}%
{You may only use \noexpand\LoadClass in a class file.}%
\fi
\@fileswithoptions\@clsextension}
\@onlypreamble\LoadClass
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@loadwithoptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% Pass the current option list on to a class or package.
% |#1| is |\@|\emph{cls-or-pkg}|extension|,
% |#2| is |\RequirePackage| or |\LoadClass|,
% |#3| is the class or package to be loaded.
% \begin{macrocode}
\def\@loadwithoptions#1#2#3{%
\expandafter\let\csname opt@#3.#1\expandafter\endcsname
\csname opt@\@currname.\@currext\endcsname
#2{#3}}
\@onlypreamble\@loadwithoptions
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\LoadClassWithOptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% Load class `|#1|' with the current option list.
% \begin{macrocode}
\def\LoadClassWithOptions{%
\@loadwithoptions\@clsextension\LoadClass}
\@onlypreamble\LoadClassWithOptions
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\RequirePackageWithOptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% \changes{v1.0v}{1996/10/04}{Reset \cs{@unprocessedoptions} for /2269}
% Load package `|#1|' with the current option list.
% \begin{macrocode}
\def\RequirePackageWithOptions{%
\AtEndOfPackage{\let\@unprocessedoptions\relax}%
\@loadwithoptions\@pkgextension\RequirePackage}
\@onlypreamble\RequirePackageWithOptions
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\usepackage}
% To begin with, |\usepackage| produces an error. This is reset by
% |\documentclass|.
% \changes{v0.2o}{1993/12/13}
% {Fixed error handling}
% \changes{v1.0h}{1994/05/23}{Remove argument if possible}
% \begin{macrocode}
\def\usepackage#1#{%
\@latex@error
{\noexpand \usepackage before \string\documentclass}%
{\noexpand \usepackage may only appear in the document
preamble, i.e.,\MessageBreak
between \noexpand\documentclass and
\string\begin{document}.}%
\@gobble}
\@onlypreamble\usepackage
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\NeedsTeXFormat}
% Check that the document is running on the correct system.
% \changes{v0.2a}{1993/11/14}
% {made more robust for alternative syntax for other formats.}
% \changes{v0.2c}{1993/11/17}
% {Name changed from \cmd\NeedsFormat}
% \changes{v0.2d}{1993/11/18}
% {\cmd\fmtname\ \cmd\fmtversion\ not \cmd{\@}\ldots}
% \begin{macrocode}
\def\NeedsTeXFormat#1{%
\def\reserved@a{#1}%
\ifx\reserved@a\fmtname
\expandafter\@needsformat
\else
\@latex@error{This file needs format `\reserved@a'%
\MessageBreak but this is `\fmtname'}{%
The current input file will not be processed
further,\MessageBreak
because it was written for some other flavor of
TeX.\MessageBreak\@ehd}%
% \end{macrocode}
% If the file is not meant to be processed by \LaTeXe{} we stop
% inputting it, but we do not end the run. We just end inputting
% the current file.
% \changes{v1.0h}{1994/05/23}
% {Don't stop completely when format is wrong}
% \begin{macrocode}
\endinput \fi}
\@onlypreamble\NeedsTeXFormat
% \end{macrocode}
%
% \begin{macrocode}
\def\@needsformat{%
\@ifnextchar[%]
\@needsf@rmat
{}}
\@onlypreamble\@needsformat
% \end{macrocode}
%
% \changes{v1.0b}{1994/05/04}
% {Changed wording of the warning}
% \begin{macrocode}
\def\@needsf@rmat[#1]{%
\@ifl@t@r\fmtversion{#1}{}%
{\@latex@warning@no@line
{You have requested release `#1' of LaTeX,\MessageBreak
but only release `\fmtversion' is available}}}
\@onlypreamble\@needsf@rmat
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\zap@space}
% |\zap@space foo|\meta{space}|\@empty| removes all spaces from |foo|
% that are not protected by |{ }| groups.
% \begin{macrocode}
\def\zap@space#1 #2{%
#1%
\ifx#2\@empty\else\expandafter\zap@space\fi
#2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@fileswithoptions}
% The common part of |\documentclass| and |\usepackage|.
% \begin{macrocode}
\def\@fileswithoptions#1{%
\@ifnextchar[%]
{\@fileswith@ptions#1}%
{\@fileswith@ptions#1[]}}
\@onlypreamble\@fileswithoptions
% \end{macrocode}
%
% \changes{v0.2f}{1993/11/22}
% {Made the default [] not [\cmd{\@unknownversion}]}
% \begin{macrocode}
\def\@fileswith@ptions#1[#2]#3{%
\@ifnextchar[%]
{\@fileswith@pti@ns#1[#2]#3}%
{\@fileswith@pti@ns#1[#2]#3[]}}
\@onlypreamble\@fileswith@ptions
% \end{macrocode}
% Then we do some work.
%
% First of all, we define the global variables.
% Then we look to see if the file has already been loaded.
% If it has, we check that it was first loaded with at least the current
% options.
% If it has not, we add the current options to the package options,
% set the default version to be |0000/00/00|, and load the file if we
% can find it.
% Then we check the version number.
%
% Finally, we restore the old file name, reset the default option,
% and we set the catcode of |@|.
%
% For classes, we can immediately process the file. For other types,
% |#2| could be a comma separated list, so loop through, processing
% each one separately.
% \changes{v0.2q}{1993/12/17}
% {Add \cmd{compatibility} hook}
% \changes{v0.2s}{1994/01/17}
% {Modify to reduce parameter stack usage}
% \changes{v0.2y}{1994/02/07}
% {Run \cmd{\@compatibility} on the first class to start
% (not the first to finish) }
% \changes{v0.2z}{1994/02/10}
% {Renamed \cmd{\@compatibility} to \cmd{\@documentclasshook}.
% ASAJ.}
% \begin{macrocode}
\def\@fileswith@pti@ns#1[#2]#3[#4]{%
\ifx#1\@clsextension
\ifx\@classoptionslist\relax
\xdef\@classoptionslist{\zap@space#2 \@empty}%
\def\reserved@a{%
\@onefilewithoptions#3[#2][#4]#1%
\@documentclasshook}%
\else
\def\reserved@a{%
\@onefilewithoptions#3[#2][#4]#1}%
\fi
\else
% \end{macrocode}
% build up a list of calls to |\@onefilewithoptions|
% (one for each package) without thrashing the parameter stack.
% \begin{macrocode}
\def\reserved@b##1,{%
\ifx\@nil##1\relax\else
\ifx\relax##1\relax\else
\noexpand\@onefilewithoptions##1[#2][#4]\noexpand\@pkgextension
\fi
\expandafter\reserved@b
\fi}%
\edef\reserved@a{\zap@space#3 \@empty}%
\edef\reserved@a{\expandafter\reserved@b\reserved@a,\@nil,}%
\fi
\reserved@a}
\@onlypreamble\@fileswith@pti@ns
% \end{macrocode}
%
% Have the main argument as |#1|, so we only need one |\expandafter|
% above.
% \changes{v0.2a}{1993/11/14}
% {Moved reseting of \cmd{\default@ds}, \cmd{\ds@} and
% \cmd{\@declaredoptions} here, from the end of
% \cmd\ProcessOptions.}
% \changes{v0.2f}{1993/11/22}
% {Made the initial version [] not [\cmd{\@unknownversion}]}
% \changes{v0.2m}{1993/12/07}
% {Reset \cmd\CurrentOption}
% \begin{macrocode}
\def\@onefilewithoptions#1[#2][#3]#4{%
\@pushfilename
\xdef\@currname{#1}%
\global\let\@currext#4%
\expandafter\let\csname\@currname.\@currext-h@@k\endcsname\@empty
\let\CurrentOption\@empty
\@reset@ptions
\makeatletter
% \end{macrocode}
% Grab everything in a macro, so the parameter stack is popped before
% any processing begins.
% \changes{v0.2s}{1994/01/17}
% {Modify to reduce parameter stack usage}
% \changes{v1.1b}{1998/05/07}
% {Modify help message for latex/2805}
% \begin{macrocode}
\def\reserved@a{%
\@ifl@aded\@currext{#1}%
{\@if@ptions\@currext{#1}{#2}{}%
{\@latex@error
{Option clash for \@cls@pkg\space #1}%
{The package #1 has already been loaded
with options:\MessageBreak
\space\space[\@ptionlist{#1.\@currext}]\MessageBreak
There has now been an attempt to load it
with options\MessageBreak
\space\space[#2]\MessageBreak
Adding the global options:\MessageBreak
\space\space
\@ptionlist{#1.\@currext},#2\MessageBreak
to your \noexpand\documentclass declaration may fix this.%
\MessageBreak
Try typing \space <return> \space to proceed.}}}%
{\@pass@ptions\@currext{#2}{#1}%
% \end{macrocode}
% \changes{v0.3c}{1994/03/12}
% {Do not use \cmd{\@pr@videpackage} to avoid typeout}
% \begin{macrocode}
\global\expandafter
\let\csname ver@\@currname.\@currext\endcsname\@empty
\InputIfFileExists
{\@currname.\@currext}%
{}%
{\@missingfileerror\@currname\@currext}%
% \end{macrocode}
% |\@unprocessedoptions| will generate an error for each specified
% option in a package unless a |\ProcessOptions| has appeared in the
% package file.
% \changes{v0.2v}{1994/01/29}
% {All options raise error if no \cmd\ProcessOptions\ appears}
% \changes{v0.2x}{1994/02/02}
% {Only run the hook and options check if the file was loaded.}
% \begin{macrocode}
\let\@unprocessedoptions\@@unprocessedoptions
\csname\@currname.\@currext-h@@k\endcsname
\expandafter\let\csname\@currname.\@currext-h@@k\endcsname
\@undefined
\@unprocessedoptions}
% \end{macrocode}
%
% \begin{macrocode}
\@ifl@ter\@currext{#1}{#3}{}%
{\@latex@warning@no@line
{You have requested,\on@line,
version\MessageBreak
`#3' of \@cls@pkg\space #1,\MessageBreak
but only version\MessageBreak
`\csname ver@#1.\@currext\endcsname'\MessageBreak
is available}}%
% \end{macrocode}
% \changes{v0.2c}{1993/11/17}
% {Added trap for two \cmd{\LoadClass} commands.}
% \begin{macrocode}
\ifx\@currext\@clsextension\let\LoadClass\@twoloadclasserror\fi
\@popfilename
\@reset@ptions}%
\reserved@a}
\@onlypreamble\@onefilewithoptions
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@fileswith@pti@ns}
% Save the definition (for error checking).
% \changes{v0.2c}{1993/11/17}
% {Macro added}
% \begin{macrocode}
\let\@@fileswith@pti@ns\@fileswith@pti@ns
\@onlypreamble\@@fileswith@pti@ns
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@reset@ptions}
% Reset the default option, and clear lists of declared options.
% \changes{v0.2a}{1993/11/14}{macro added}
% \begin{macrocode}
\def\@reset@ptions{%
\global\ifx\@currext\@clsextension
\let\default@ds\OptionNotUsed
\else
\let\default@ds\@unknownoptionerror
\fi
\global\let\ds@\@empty
\global\let\@declaredoptions\@empty}
\@onlypreamble\@reset@ptions
% \end{macrocode}
% \end{macro}
%
% \subsection{Hooks}
%
% Allow code do be saved to be executed at specific later times.
%
% Save things in macros, I considered using toks registers, (and
% |\addto@hook| from the NFSS code, that would require stacking the
% contents in the case of required packages, so just generate a new
% macro for each package.
% \begin{macro}{\@begindocumenthook}
% \changes{v1.0s}{1995/10/20}
% {Make setting conditional, for autoload version}
% \begin{macro}{\@enddocumenthook}
% Stuff to appear at the begining or end of the document.
% \begin{macrocode}
\ifx\@begindocumenthook\@undefined
\let\@begindocumenthook\@empty
\fi
\let\@enddocumenthook\@empty
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\g@addto@macro}
% Globally add to the end of a macro.
% \changes{v0.2a}{1993/11/14}{Made global}
% \changes{v0.2w}{1994/01/31}
% {Use toks register to avoid `hash' problems}
% \changes{v1.0o}{1995/05/17}
% {Make long for latex/1522}
% \changes{v1.0w}{1996/12/17}
% {Use \cs{begingroup} to save making a mathord}
% \changes{v1.0x}{1997/02/05}
% {missing percent /2402}
% \begin{macrocode}
\long\def\g@addto@macro#1#2{%
\begingroup
\toks@\expandafter{#1#2}%
\xdef#1{\the\toks@}%
\endgroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\AtEndOfPackage}
% \begin{macro}{\AtEndOfClass}
% \begin{macro}{\AtBeginDocument}
% \begin{macro}{\AtEndDocument}
% The access functions.
% \changes{v0.2a}{1993/11/14}
% {Included extension in the generated macro name for package
% and class hooks.}
% \begin{macrocode}
\def\AtEndOfPackage{%
\expandafter\g@addto@macro\csname\@currname.\@currext-h@@k\endcsname}
\let\AtEndOfClass\AtEndOfPackage
\@onlypreamble\AtEndOfPackage
\@onlypreamble\AtEndOfClass
% \end{macrocode}
%
% \begin{macrocode}
\def\AtBeginDocument{\g@addto@macro\@begindocumenthook}
\def\AtEndDocument{\g@addto@macro\@enddocumenthook}
\@onlypreamble\AtBeginDocument
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \begin{macro}{\@cls@pkg}
% The current file type.
% \changes{v0.2i}{1993/12/03}
% {Name changed to avoid clash with output routine.}
% \begin{macrocode}
\def\@cls@pkg{%
\ifx\@currext\@clsextension
document class%
\else
package%
\fi}
\@onlypreamble\@cls@pkg
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@unknownoptionerror}
% Bad option.
% \begin{macrocode}
\def\@unknownoptionerror{%
\@latex@error
{Unknown option `\CurrentOption' for \@cls@pkg\space`\@currname'}%
{The option `\CurrentOption' was not declared in
\@cls@pkg\space`\@currname', perhaps you\MessageBreak
misspelled its name.
Try typing \space <return>
\space to proceed.}}
\@onlypreamble\@unknownoptionerror
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@unprocessedoptions}
% Declare an error for each option, unless a |\ProcessOptions| occured.
% \changes{v0.2v}{1994/01/29}
% {Macro added.}
% \changes{v1.0t}{1995/11/14}{Allow empty option}
% \begin{macrocode}
\def\@@unprocessedoptions{%
\ifx\@currext\@pkgextension
\edef\@curroptions{\@ptionlist{\@currname.\@currext}}%
\@for\CurrentOption:=\@curroptions\do{%
\ifx\CurrentOption\@empty\else\@unknownoptionerror\fi}%
\fi}
\@onlypreamble\@unprocessedoptions
\@onlypreamble\@@unprocessedoptions
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@badrequireerror}
% |\RequirePackage| or |\LoadClass| occurs in the options section.
% \changes{v0.2c}{1993/11/17}
% {Macro added}
% \begin{macrocode}
\def\@badrequireerror#1[#2]#3[#4]{%
\@latex@error
{\noexpand\RequirePackage or \noexpand\LoadClass
in Options Section}%
{The \@cls@pkg\space `\@currname' is defective.\MessageBreak
It attempts to load `#3' in the options section, i.e.,\MessageBreak
between \noexpand\DeclareOption and \string\ProcessOptions.}}
\@onlypreamble\@badrequireerror
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@twoloadclasserror}
% Two |\LoadClass| in a class.
% \changes{v0.2c}{1993/11/17}
% {Macro added}
% \begin{macrocode}
\def\@twoloadclasserror{%
\@latex@error
{Two \noexpand\LoadClass commands}%
{You may only use one \noexpand\LoadClass in a class file}}
\@onlypreamble\@twoloadclasserror
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@twoclasseserror}
% Two |\documentclass| or |\documentstyle|.
% \changes{v0.2h}{1993/11/28}
% {Macro added}
% \begin{macrocode}
\def\@twoclasseserror#1#{%
\@latex@error
{Two \noexpand\documentclass or \noexpand\documentstyle commands}%
{The document may only declare one class.}\@gobble}
\@onlypreamble\@twoclasseserror
% \end{macrocode}
% \end{macro}
%
% \subsection{Providing shipment}
%
% \begin{macro}{\two@digits}
% Prefix a number less than 10 with `0'.
% \begin{macrocode}
\def\two@digits#1{\ifnum#1<10 0\fi\number#1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\filecontents}
% \begin{macro}{\endfilecontents}
% This environment implements inline files.
% The star-form does not write extra comments into the file.
%
% \changes{v0.2h}{1993/11/28}
% {Don't globally allocate a write stream (always use 15)}
% \changes{v0.2r}{1993/12/19}{Different message when ignoring a file}
% \changes{v0.3g}{1994/04/11}
% {Add star form,
% dont write \cmd{\endinput} at the end of the file.}
% \changes{v1.0c}{1994/05/11}
% {Add checks for form feed and tab}
% \changes{v1.0m}{1995/04/21}
% {Close input check stream: latex/1487}
% \changes{v1.0p}{1995/05/25}{Delete \cs{filec@ntents} after preamble}
% \begin{macrocode}
\begingroup%
\catcode`\*=11 %
\catcode`\^^M\active%
\catcode`\^^L\active\let^^L\relax%
\catcode`\^^I\active%
% \end{macrocode}
%
% \begin{macrocode}
\gdef\filecontents{\@tempswatrue\filec@ntents}%
\gdef\filecontents*{\@tempswafalse\filec@ntents}%
% \end{macrocode}
%
% \begin{macrocode}
\gdef\filec@ntents#1{%
\openin\@inputcheck#1 %
\ifeof\@inputcheck%
\@latex@warning@no@line%
{Writing file `\@currdir#1'}%
% \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
% {\cs{reserved@c} not \cs{verbatim@out} to save a csname}
% \begin{macrocode}
\chardef\reserved@c15 %
\ch@ck7\reserved@c\write%
\immediate\openout\reserved@c#1\relax%
\else%
% \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
% {Use \cs{@gobbletwo}}
% \begin{macrocode}
\closein\@inputcheck%
\@latex@warning@no@line%
{File `#1' already exists on the system.\MessageBreak%
Not generating it from this source}%
\let\write\@gobbletwo%
\let\closeout\@gobble%
\fi%
\if@tempswa%
% \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
% {\cs{@currenvir} in banner}
% \begin{macrocode}
\immediate\write\reserved@c{%
\@percentchar\@percentchar\space%
\expandafter\@gobble\string\LaTeX2e file `#1'^^J%
\@percentchar\@percentchar\space generated by the %
`\@currenvir' \expandafter\@gobblefour\string\newenvironment^^J%
\@percentchar\@percentchar\space from source `\jobname' on %
\number\year/\two@digits\month/\two@digits\day.^^J%
\@percentchar\@percentchar}%
\fi%
\let\do\@makeother\dospecials%
% \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
% {Check for text before or after \cs{end} environment. latex/2636}
% \begin{macrocode}
\edef\E{\@backslashchar end\string{\@currenvir\string}}%
\edef\reserved@b{%
\def\noexpand\reserved@b%
####1\E####2\E####3\relax}%
\reserved@b{%
\ifx\relax##3\relax%
% \end{macrocode}
% There was no |\end{filecontents}|
% \begin{macrocode}
\immediate\write\reserved@c{##1}%
\else%
% \end{macrocode}
% There was a |\end{filecontents}|, so stop this time.
% \begin{macrocode}
\edef^^M{\noexpand\end{\@currenvir}}%
\ifx\relax##1\relax%
\else%
% \end{macrocode}
% Text before the |\end|, write it with a warning.
% \begin{macrocode}
\@latex@warning{Writing text `##1' before %
\string\end{\@currenvir}\MessageBreak as last line of #1}%
\immediate\write\reserved@c{##1}%
\fi%
\ifx\relax##2\relax%
\else%
% \end{macrocode}
% Text after the |\end|, ignore it with a warning.
% \begin{macrocode}
\@latex@warning{%
Ignoring text `##2' after \string\end{\@currenvir}}%
\fi%
\fi%
^^M}%
% \end{macrocode}
%
% \begin{macrocode}
\catcode`\^^L\active%
\let\L\@undefined%
\def^^L{\@ifundefined L^^J^^J^^J}%
\catcode`\^^I\active%
\let\I\@undefined%
\def^^I{\@ifundefined I\space\space}%
\catcode`\^^M\active%
\edef^^M##1^^M{%
\noexpand\reserved@b##1\E\E\relax}}%
\endgroup%
% \end{macrocode}
%
% \begin{macrocode}
\begingroup
\catcode`|=\catcode`\%
\catcode`\%=12
\catcode`\*=11
\gdef\@percentchar{%}
\gdef\endfilecontents{|
\immediate\closeout\reserved@c
\def\T##1##2##3{|
\ifx##1\@undefined\else
\@latex@warning@no@line{##2 has been converted to Blank ##3e}|
\fi}|
\T\L{Form Feed}{Lin}|
\T\I{Tab}{Spac}|
\immediate\write\@unused{}}
\global\let\endfilecontents*\endfilecontents
\@onlypreamble\filecontents
\@onlypreamble\endfilecontents
\@onlypreamble\filecontents*
\@onlypreamble\endfilecontents*
\endgroup
\@onlypreamble\filec@ntents
% \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% \changes{v0.2f}{1993/11/22}
% {\cs{@unknownversion} removed}
% \changes{v1.0j}{1994/10/18}
% {Move \cs{listfiles} to ltfiles.dtx}
%
% \begin{macrocode}
%</2ekernel>
% \end{macrocode}
%
% \section{After Preamble}
% Finally we declare a package that allows all the commands declared
% above to be |\@onlypreamble| to be used after |\begin{document}|.
% \changes{v0.3f}{1994/03/16}
% {Add pkgindoc package}
% \changes{v1.1a}{1998/03/21}
% {Correct to new onlypreamble command list}
% \begin{macrocode}
%<*afterpreamble>
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{pkgindoc}
[1994/10/20 v1.1 Package Interface in Document (DPC)]
\def\reserved@a#1\do\@classoptionslist#2\do\filec@ntents#3\relax{%
\gdef\@preamblecmds{#1#3}}
\expandafter\reserved@a\@preamblecmds\relax
%</afterpreamble>
% \end{macrocode}
%
% \Finale
|
