% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
% For further copyright information, and conditions for modification
% and distribution, see the file legal.txt, and any other copyright
% notices in this file.
%
% This file is part of the LaTeX2e system.
% ----------------------------------------
% This system is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
%
% For error reports concerning UNCHANGED versions of this file no
% more than one year old, see bugs.txt.
%
% Please do not request updates from us directly. Primary
% distribution is through the CTAN archives.
%
%
% IMPORTANT COPYRIGHT NOTICE:
%
% You are NOT ALLOWED to distribute this file alone.
%
% You are allowed to distribute this file under the condition that it
% is distributed together with all the files listed in manifest.txt.
%
% If you receive only some of these files from someone, complain!
%
%
% Permission is granted to copy this file to another file with a
% clearly different name and to customize the declarations in that
% copy to serve the needs of your installation, provided that you
% comply with the conditions in the file legal.txt.
%
% However, NO PERMISSION is granted to produce or to distribute a
% modified version of this file under its original name.
%
% You are NOT ALLOWED to change this file.
%
%
%
% \fi
% \iffalse
%%% From File: ltoutput.dtx
%<def1>\ProvidesFile{autoout1.sty}
%<flafter>\ProvidesPackage{flafter}
%<def1,flafter> [1997/11/19 v1.2d
%<def1> Output Routine autoload file]
%<flafter> Standard LaTeX floats after reference (FMi)]
%
%<*driver>
% \fi
\ProvidesFile{ltoutput.dtx}
[1997/11/19 v1.2d LaTeX Kernel (Output Routine)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltoutput.dtx}
\title{\filename}
\date{\filedate}
\author{Leslie Lamport, Frank Mittelbach, Chris Rowley}
\begin{document}
\maketitle
\DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \CheckSum{2733}
%
%
% \iffalse
% LATEX VERSION 2e
% Copyright (C) 1992 by Leslie Lamport
% Copyright (C) 1994-97 by Leslie Lamport, LaTeX3 project
%
% LaTeX 2e kernel file for the output routine.
%
% Part of this file is the latest (not greatest, it still
% deserves its name) version of kludge.sty.
%
% It also contains a few enhancements and many changes (corrections
% and tidyings) to the float mechanism and other parts of the output
% routine.
%
% The tracing in the file at present is mainly to help in testing the
% code but it may well be developed into a full float tracing
% package one day.
%
% ============================
% \fi
%
% \changes{v1.1p}{1995/08/25}{Support autoloading feature (FMi).}
% \task{CAR}{Update documentation.}
% \changes{v1.0k}{1994/02/08}{Documentation and tasks tidied.}
% \changes{v1.0l}{1994/03/15}{Driver added and further tidying.}
% \changes{v1.0l}{1994/03/15}{Some boxmaxdepth settings removed.}
% \changes{v1.0l}{1994/03/15}{Added some warnings when page gets full of
% top floats.}
% \changes{v1.0l}{1994/03/15}{Removed duplicated code and corrected
% docstrip options.}
% \changes{v1.0m}{1994/04/24}{Removed some long lines and other
% aesthetic changes.}
% \changes{v1.0m}{1994/04/24}{Corrected unverbed commands in
% documentation.}
% \changes{v1.0m}{1994/04/24}{Changed \cs{@normalsize} to
% \cs{normalsize}.}
% \changes{v1.0m}{1994/04/24}{Warning messages changed/corrected.}
% \changes{v1.0n}{1994/04/30}{Added \cs{col@number}.}
% \changes{v1.0n}{1994/04/30}{Fixed bug from \cs{dblfigrule} with
% \cs{@topnewpage}.}
% \changes{v1.0n}{1994/04/30}{Documentation tidied.}
% \changes{v1.0n}{1994/04/30}{\cs{@activechar@warning} changed to an
% info message.}
% \changes{v1.0n}{1994/04/30}{Full of floats action improved.}
% \changes{v1.0n}{1994/04/30}{Empty column action added.}
% \changes{v1.0o}{1994/05/02}{Code of \cs{@resethfps} shortened.}
% \changes{v1.0p}{1994/05/12}{\cs{normalcolor}added in various
% places (DPC).}
% \changes{v1.0q}{1994/05/16}{Changed setting of accents (FMi).}
% \changes{v1.0s}{1994/05/20}{Added setting of \cs{protect}
% during \cs{shipout}.}
% \changes{v1.0t}{1994/05/22}{Changed warnings and infos to
% new commands.}
% \changes{v1.0u}{1994/05/23}{Added \cs{MessageBreak}.}
% \changes{v1.0u}{1994/05/23}{Changed resetting of \cs{protect} after
% shipout.}
% \changes{v1.0v}{1994/05/25}{Extra documentation.}
% \changes{v1.0w}{1994/06/01}{Tidied up typesetting.}
%
% \changes{v1.1f}{1994/11/14}{Removed old definition of \cs{@testfp}.}
% \changes{v1.1h}{1994/11/17}
% {\cs{@tempa} to \cs{reserved@a}.}
% \changes{v1.1m}{1995/05/07}{Use \cs{hb@xt@}.}
%
% \StopEventually{}
%
% \def \ie {i.e.~}
% \def \eg {e.g.~}
%
% \section{Output Routine}
%
% \subsection{Floats}
%
% The `2ekernel' code ensures that a |\usepackage{autoout1}| is
% essentially ignored if a `full' format is being used that has
% the autoload file mode already in the format.
% \begin{macrocode}
%<defx>\begingroup
%<defx>\makeatletter
%<defx>\nfss@catcodes
%<2ekernel>\expandafter\let\csname ver@autoout1.sty\endcsname\fmtversion
% \end{macrocode}
%
%
% \begin{oldcomments}
% \begin{macrocode}
%<*2ekernel|autoload>
\message{output,}
% \end{macrocode}
% ****************************************
% * OUTPUT *
% ****************************************
%
%
% PAGE LAYOUT PARAMETERS
%
% \topmargin : Extra space added to top of page.
% @twoside : boolean. T if two-sided printing
% \oddsidemargin : IF @twoside = T
% THEN extra space added to left of odd-numbered
% pages.
% ELSE extra space added to left of all pages.
% \evensidemargin : IF @twoside = T
% THEN extra space added to left of even-numbered
% pages.
% \headheight : height of head
% \headsep : separation between head and text
% \footskip : distance separation between baseline of last
% line of text and baseline of foot.
% Note difference between \footSKIP and \headSEP.
% \textheight : height of text on page, excluding head and foot
% \textwidth : width of printing on page
% \columnsep : IF @twocolumn = T
% THEN width of space between columns
% \columnseprule : IF @twocolumn = T
% THEN width of rule between columns (0 if none).
% \columnwidth : IF @twocolumn = T
% THEN (\textwidth - \columnsep)/2
% ELSE \textwidth
% It is set by the \twocolumn and
% \onecolumn commands.
% \@textbottom : Command executed at bottom of vbox holding text of
% page (including figures). The \raggedbottom
% command almost \let's this to \vfil (actually sets
% it to \vskip \z@ plus.0001fil).
% Should have depth 0pt.
%
% \@texttop : Command executed at top of vbox holding text of
% page (including figures). Used by letter style;
% can also be used to produce centered pages.
% Let to \relax by \raggedbottom and \flushbottom.
%
% Page layout must initialize \@colht and \@colroom to \textheight.
%
% PAGE STYLE PARAMETERS:
%
% \floatsep : Space left between floats.
% \textfloatsep : Space between last top float or first bottom float
% and the text.
% \topfigrule : Command to place rule (or whatever) between floats
% at top of page and text. Executed in inner
% vertica mode right before the \textfloatsep skip
% separating the floats from the text. Must occupy
% zero vertical space. (See \footnoterule.)
% \botfigrule : Same as \topfigrule, but put after the
% \textfloatsep skip separating text from the
% floats at bottom of page.
% \intextsep : Space left on top and bottom of an in-text float.
% \dblfloatsep : Space between double-column floats.
% \dbltextfloatsep : Space between top double-column floats
% and text.
% \dblfigrule : Similar to \topfigrule, but for double-column
% floats.
% \@fptop : Glue to go at top of float column -- must be 0pt +
% stretch
% \@fpsep : Glue to go between floats in a float column.
% \@fpbot : Glue to go at bottom of float column
% -- must be 0pt +
% stretch
% \@dblfptop, \@dblfpsep, \@dblfpbot
% : Analogous for double-column float page in
% two-column format.
%
% FOOTNOTES: As in PLAIN, footnotes use \insert\footins.
%
% PAGE LAYOUT SWITCHES AND MACROS
%
% @twocolumn : Boolean. T if two columns per page globally.
%
% PAGE STYLE MACROS AND SWITCHES
%
% \@oddhead : IF @twoside = T
% THEN macro to generate head of odd-numbered
% pages.
% ELSE macro to generate head of all pages.
% \@evenhead : IF @twoside = T
% THEN macro to generate head of even-numbered
% pages.
% \@oddfoot : IF @twoside = T
% THEN macro to generate foot of odd-numbered
% pages.
% ELSE macro to generate foot of all pages.
% \@evenfoot : IF @twoside = T
% THEN macro to generate foot of even-numbered
% pages.
% @specialpage : boolean. T if current page is to have a special
% format.
% \@specialstyle : If its value is foo then
% IF @specialpage = T
% THEN the command \ps@foo is executed to
% temporarily reset the page style parameters
% before composing the current page.
% This command should execute only \def's and
% \edef's, making only local definitions.
%
% FLOAT PLACEMENT PARAMETERS
%
% The following parameters are set by the macro \@floatplacement.
% When \@floatplacement is called,
% \@colht is the height of the page or column being built. I.e.:
% * For single-column page it equals \textheight.
% * For double-column page it equals \textheight - height
% of double-column floats on page.
% Note that some are set globally and some locally:
% \@topnum :=G Maximum number of floats allowed on the top of a
% column.
% \@toproom :=G Maximum amount of top of column devoted to floats--
% excluding \textfloatsep separation below the floats
% and \floatsep separation between them. For
% two-column output, should be computed as a function
% of \@colht.
% \@botnum, \@botroom
% : Analogous to above.
% \@colnum :=G Maximum number of floats allowed in a column,
% including in-text floats.
% \@textmin :=L Minimum amount of text (excluding footnotes) that
% must appear on a text page.
% %% 27 Sep 85 : made local to
% %% \@addtocurcol and \@addtonextcol
% It is now also used locally in processing double
% floats.
% \@fpmin :=L Minimum height of floats in a float column.
%
% The macro \@dblfloatplacement sets the following parameters.
% \@dbltopnum :=G Maximum number of double-column floats allowed at
% the top of a two-column page.
% \@dbltoproom :=G Maximum height of double-column floats allowed at
% top of two-column page.
% \@fpmin :=L Minimum height of floats in a float column.
% It should also perform the following local assignments where necessary
% -- i.e., where the new value differs from the old one:
% \@fptop :=L \@dblfptop
% \@fpsep :=L \@dblfpsep
% \@fpbot :=L \@dblfpbot
%
% OUTPUT ROUTINE VARIABLES
%
% \@colht : The total height of the current column. In single column
% style, it equals \textheight. In two-column style, it is
% \textheight minus the height of the double-column floats
% on the current page. MUST BE INITIALIZED TO \textheight.
%
% \@colroom : The height available in the current column for text and
% footnotes. It equals \@colht minus the height of all
% floats committed to the top and bottom of the current
% column.
%
% \@textfloatsheight : The total height of in-text floats on the
% current page.
%
% \footins : Footnote insertion number.
%
% \@maxdepth : Saved value of TeX's \maxdepth. Must be set
% when any routine sets \maxdepth.
%
% CALLING THE OUTPUT ROUTINE
% --------------------------
%
% The output routine is called either by TeX's normal page-breaking
% mechanism, or by a macro putting a penalty < or = -10000 in the output
% list. In the latter case, the penalty indicates why the output
% routine was called, using the following code.
%
% penalty reason
% ------- ------
% -10000 \pagebreak
% \newpage
% -10001 \clearpage (\penalty -10000 \vbox{} \penalty -10001)
% -10002 float insertion, called from horizontal mode
% -10003 float insertion, called from vertical mode.
% -10004 float insertion.
%
% Note: A float or marginpar puts the following sequence in the output
% list: (i) a penalty of -10004,
% (ii) a null \vbox
% (iii) a penalty of -10002 or -10003.
% This solves two special problems:
% 1. If the float comes right after a \newpage or \clearpage,
% then the first penalty is ignored, but the second one
% invokes the output routine.
% 2. If there is a split footnote on the page, the second 'page'
% puts out the rest of the footnote.
%
% THE OUTPUT ROUTINE
% ------------------
%
% FUNCTIONS USED IN THE OUTPUT ROUTINE:
%
% \@outputpage : Produces an output page with the contents of box
% \@outputbox as the text part.
% Also sets \@colht :=G \textheight.
% The page style is determined as follows.
% IF @thispagestyle = true
% THEN use \thispagestyle style
% ELSE use ordinary page style.
%
% \@tryfcolumn\FLIST : Tries to form a float column composed of floats
% from \FLIST (if nonempty) with the following parameters:
% \@colht : height of box
% \@fpmin : minimum height of floats in the box
% \@fpsep : interfloat space
% \@fptop : glue at top of box
% \@fpbot : glue at bottom of box.
% If it succeeds, then it does the following:
% * \@outputbox :=L the composed float box.
% * @fcolmade :=G true
% * \FLIST :=G \FLIST - floats put in box
% * \@freelist :=G \@freelist + floats put in box
% If it fails, then:
% * @fcolmade :=G false
% NOTE: BIT MUST BE A SINGLE TOKEN!
%
% \@makefcolumn \FLIST : Same as \@tryfcolumn except that it
% fails to make a float column only if \FLIST is empty.
% Otherwise, it makes a float column containing at least
% the first box in \FLIST, disregarding \@fpmin.
%
% \@startcolumn :
% Calls \@tryfcolumn\@deferlist. If \@tryfcolumn returns with
% (globally set) @fcolmade = false, then:
% * Globally sets \@toplist and \@botlist to floats
% from \@deferlist to go at top and bottom of column,
% deleting them from \@deferlist. It does
% this using \@colht as the total height, the page
% style parameters \@floatsep and \@textfloatsep, and
% the float placement parameters \@topnum, \@toproom,
% \@botnum, \@botroom, \@colnum and \textfraction.
% * Globally sets \@colroom to \@colht minus the height
% of the added floats.
%
% \@startdblcolumn :
% Calls \@tryfcolumn\@dbldeferlist{8}. If \@tryfcolumn returns
% with (globally set) @fcolmade = false, then:
% * Globally sets \@dbltoplist to floats from
% \@dbldeferlist to go at top and bottom of column,
% deleting them from \@dbldeferlist.
% It does this using \textheight as the
% total height, and the parameters \@dblfloatsep, etc.
% * Globally sets \@colht to \textheight minus the height
% of the added floats.
%
% \@combinefloats : Combines the text from box
% \@outputbox with the floats from \@toplist and \@botlist,
% putting the new box in \@outputbox. It uses \floatsep
% and \textfloatsep for the appropriate separations.
% It puts the elements of \TOPLIST and \BOTLIST onto
% \@freelist, and makes those lists null.
%
% \@makecol : Makes the contents of \box255 plus the accumulated
% footnotes, plus the floats in \@toplist and \@botlist,
% into a single column of height \@colht (unless the page
% height has been locally changed), which it puts
% into box \@outputbox. It puts boxes in \@midlist back
% onto \@freelist and restores \maxdepth.
%
% \@opcol : Outputs a column whose text is in box \@outputbox
% If @twocolumn = false, then it calls \@outputpage,
% sets \@colht :=G \textheight, and calls \@floatplacement.
%
% If @twocolumn = true, then:
% If @firstcolumn = true, then it puts box \@outputbox
% into \@leftcolumn and sets @firstcolumn :=G false.
%
% If @firstcolumn = false, then it puts out the current
% two-column page, any possible two-column float pages,
% and determines \@dbltoplist for the next page.
%
%
%
% USER COMMANDS THAT CALL OR AFFECT THE OUTPUT ROUTINE
% ----------------------------------------------------
%
% \newpage == BEGIN \par\vfil\penalty -10000 END
%
% \clearpage == BEGIN \newpage
% \write -1{} % Part of hack to make sure no
% \vbox{} % \write's get lost.
% \penalty -10001
% END
%
% \cleardoublepage == BEGIN \clearpage
% if @twoside = true and c@page is even
% then \hbox{} \newpage fi
% END
%
%
% \twocolumn[BOX] : starts a new page, chnaging to twocolumn setting
% and puts BOX in a parbox of width \textwidth across the top.
% Useful for full-width titles for double-column pages.
% SURPRISE: The stretch from \@dbltextfloatsep will be inserted
% between the BOX and the top of the two columns.
%
%
% FLOAT-HANDLING MECHANISMS
% -------------------------
%
% The float environment obtains an insertion number B from the
% \@freelist (see below for a description of list manipulation), puts
% the float into box B and sets \count B to a FLOAT SPECIFIER. For
% a normal (not double-column) float, it then causes a page break
% in one of the following two ways:
% - In outer hmode: \vadjust{\penalty -10002}
% - In vmode : \penalty -10003.
% For a double-column float, it puts B onto the \@dbldeferlist.
% The float specifier has two components:
% * A PLACEMENT SPECIFICATION, describing where the float may
% be placed.
% * A TYPE, which is a power of two--e.g., figures might be
% type 1 floats, tables type 2 floats, programs type 4 floats, etc.
% The float specifier is encoded as follows, where bit 0 is the least
% significant bit.
%
% Bit Meaning
% --- -------
% 0 1 iff the float may go where it appears in the text.
% 1 1 iff the float may go on the top of a page.
% 2 1 iff the float may go on the bottom of a page.
% 3 1 iff the float may go on a float page.
% 4 1 unless the PLACEMENT incluses a !
% 5 1 iff a type 1 float
% 6 1 iff a type 2 float
% etc.
%
% A negative float specifier is used to indicate a marginal note.
%
% MACROS AND DATA STRUCTURES FOR PROCESSING FLOATS
% ------------------------------------------------
%
% A FLOAT LIST consisting of the floats in boxes \boxa ... \boxN has
% the form:
% \@elt \boxa ... \@elt \boxN
% where \boxI is defined by
% \newinsert\boxI
% Normally, \@elt is \let to \relax. A test can be performed on the
% entire float list by locally \def'ing \@elt appropriately and
% executing the list.
% This is a lot more efficient than looping through the list.
%
% The following macros are used for manipulating float lists.
%
% \@next \CS \LIST {NONEMPTY}{EMPTY} == %% NOTE: ASSUME \@elt = \relax
% BEGIN assume that \LIST == \@elt \B1 ... \@elt \Bn
% if n = 0
% then EMPTY
% else \CS :=L \B1
% \LIST :=G \@elt \B2 ... \@elt \Bn
% NONEMPTY
% fi
% END
%
%
% \@bitor\NUM\LIST : Globally sets switch @test to the disjunction for
% all I of bit log2 \NUM of the float specifiers of all the
% floats in \LIST.
% I.e., @test is set to true iff there is at least one
% float in \LIST having bit log2 \NUM of its float specifier
% equal to 1.
%
% Note: log2 [(\count I)/32] is the bit number corresponding to the
% type of float I. To see if there is any float in \LIST having
% the same type as float I, you run \@bitor with
% \NUM = [(\count I)/32] * 32.
%
% \@bitor\NUM\LIST ==
% BEGIN
% @test :=G false
% { \@elt \CTR == if \NUM <> 0 then
% if \count\CTR / \NUM is odd
% then @test := true fi fi
% \LIST
% }
% END
%
%
% \@cons\LIST\NUM : Globally sets \LIST := \LIST * \@elt \NUM
%
% \@cons\LIST\NUM ==
% BEGIN { \@elt == \relax
% \LIST :=G \LIST \@elt \NUM
% }
%
% BOX LISTS FOR FLOAT-PLACEMENT ALGORITHMS
%
% \@freelist : List of empty boxes for placing new floats.
% \@toplist : List of floats to go at top of current column.
% \@midlist : List of floats in middle of current column.
% \@botlist : List of floats to go at bottom of current column.
% \@deferlist : List of floats to go after current column.
% \@dbltoplist : List of double-col. floats to go at top of current
% page.
% \@dbldeferlist : List of double-column floats to go on subsequent
% pages.
%
% FLOAT-PLACEMENT ALGORITHMS
%
%
% \@addtobot : Tries to put insert \@currbox on \@botlist.
% Called only when:
% * \ht BOX < \@colroom
% * type of \@currbox not on \@deferlist
% * \@colnum > 0
% * @insert = false
% If it succeeds, then:
% * sets @insert true
% * decrements \@botroom by \ht BOX
% * decrements \@botnum and \@colnum by 1
% * decrements \@colroom by \ht BOX + either \floatsep
% or \textfloatsep, as appropriate.
% * sets \maxdepth to 0pt
%
% \@addtotoporbot : Tries to put insert \@currbox on \@toplist or
% \@botlist.
% Called only under same conditions as \@addtobot.
% If it succeeds, then:
% * sets @insert true
% * decrements \@toproom or \@botroom by \ht BOX
% * decrements \@colnum and either \@topnum or
% \@botnum by 1
% * decrements \@colroom by \ht BOX + \floatsep
% or \textfloatsep, as appropriate.
%
% \@addtocurcol : Tries to add \@currbox to current column, setting
% @insert true if it succeeds, false otherwise.
% It will add \@currbox to top only if bit 0 of
% \count \@currbox is 0, and to the bottom only if
% bit 0 = 0 or an earlier float of the same type is
% put on the bottom.
% If the float is put in the text, then
% \penalty\interlinepenalty is put
% right after the float, before the following \vskip,
% and \outputpenalty :=L 0.
%
% \@addtonextcol : Tries to add \@currbox to the next column, setting
% @insert true if it succeeds, false otherwise.
%
% \@addtodblcol : Tries to add \@currbox to the next double-column page,
% adding it to \@dbltoplist if it succeeds and
% \@dbldeferlist if it fails.
%
%
% \@addmarginpar ==
% BEGIN
% if \@currlist nonempty
% then remove \@marbox from \@currlist
% add \@marbox and \@currbox to \@freelist
% %% NOTE: \@currbox = left box
% else LaTeX error: ? %% shouldn't happen
% fi
% \@tempcnta := 1 %% 1 = right, -1 = left
% if @twocolumn = true
% then if @firstcolumn = true
% then \@tempcnta := -1
% fi
% else if @mparswitch = true
% then if count0 odd
% else \@tempcnta := -1
% fi
% fi
% if @reversemargin = true
% then \@tempcnta := -\@tempcnta
% fi
% fi
% if \@tempcnta < 0 then \box\@marbox :=G \box\@currbox
% fi
% \@tempdima :=L maximum(\@mparbottom - \@pageht
% + ht of \@marbox, 0)
% if \@tempdima > 0 then LaTeX warning: 'marginpar moved' fi
% \@mparbottom :=G \@pageht + \@tempdima + depth of \@marbox
% + \marginparpush
% \@tempdima :=L \@tempdima - ht of \@marbox
% \box\@marbox :=G \box\@currbox
% \vbox { \vskip \@tempdima
% \box\@marbox
% }
% height of \@marbox :=G depth of \@marbox :=G 0
% \kern -\@pagedp
% \nointerlineskip
% \hbox{ if @tempcnta > 0 then \hskip \columnwidth
% \hskip \marginparsep
% else \hskip -\marginparsep
% \hskip -\marginparwidth
% fi
% \box\@marbox \hss
% }
% \nobreak
% \nointerlineskip
% \hbox{\vrule height 0 width 0 depth \@pagedp}
% END
%
% Floats and marginpars add a lot of dead cycles.
% \begin{macrocode}
\maxdeadcycles = 100
% \end{macrocode}
%
% \begin{macrocode}
\let\@elt\relax
% \end{macrocode}
%
% \begin{macrocode}
\def\@next#1#2#3#4{\ifx#2\@empty #4\else
\expandafter\@xnext #2\@@#1#2#3\fi}
% \end{macrocode}
%
% \begin{macrocode}
\def\@xnext \@elt #1#2\@@#3#4{\def#3{#1}\gdef#4{#2}}
% \end{macrocode}
%
% \changes{v1.1v}{1996/07/26}{put \cs{global} into definition}
% \begin{macrocode}
\def\@testfalse{\global\let\if@test\iffalse}
\def\@testtrue {\global\let\if@test\iftrue}
\@testfalse
% \end{macrocode}
%
% \changes{v1.1v}{1996/07/26}{remove \cs{global} before \cs{@test...}}
% \begin{macrocode}
\def\@bitor#1#2{\@testfalse {\let\@elt\@xbitor
\@tempcnta #1\relax #2}}
% \end{macrocode}
% RmS 91/11/22: Added test for |\count#1 = 0|.
% Suggested by Chris Rowley.
%
%
% \changes{v1.1v}{1996/07/26}{remove \cs{global} before \cs{@test...}}
% \begin{macrocode}
\def\@xbitor #1{\@tempcntb \count#1
\ifnum \@tempcnta =\z@
\else
\divide\@tempcntb\@tempcnta
\ifodd\@tempcntb \@testtrue\fi
\fi}
% \end{macrocode}
%
% DEFINITION OF FLOAT BOXES:
% \begin{macrocode}
\newinsert\bx@A
\newinsert\bx@B
\newinsert\bx@C
\newinsert\bx@D
\newinsert\bx@E
\newinsert\bx@F
\newinsert\bx@G
\newinsert\bx@H
\newinsert\bx@I
\newinsert\bx@J
\newinsert\bx@K
\newinsert\bx@L
\newinsert\bx@M
\newinsert\bx@N
\newinsert\bx@O
\newinsert\bx@P
\newinsert\bx@Q
\newinsert\bx@R
% \end{macrocode}
%
% \begin{macrocode}
\gdef\@freelist{\@elt\bx@A\@elt\bx@B\@elt\bx@C\@elt\bx@D\@elt\bx@E
\@elt\bx@F\@elt\bx@G\@elt\bx@H\@elt\bx@I\@elt\bx@J
\@elt\bx@K\@elt\bx@L\@elt\bx@M\@elt\bx@N
\@elt\bx@O\@elt\bx@P\@elt\bx@Q\@elt\bx@R}
% \end{macrocode}
%
% \begin{macrocode}
\gdef\@toplist{}
\gdef\@botlist{}
\gdef\@midlist{}
\gdef\@currlist{}
\gdef\@deferlist{}
\gdef\@dbltoplist{}
\gdef\@dbldeferlist{}
% \end{macrocode}
%
% PAGE LAYOUT PARAMETERS
% \begin{macrocode}
\newdimen\topmargin
\newdimen\oddsidemargin
\newdimen\evensidemargin
\let\@themargin=\oddsidemargin
\newdimen\headheight
\newdimen\headsep
\newdimen\footskip
\newdimen\textheight
\newdimen\textwidth
\newdimen\columnwidth
\newdimen\columnsep
\newdimen\columnseprule
\newdimen\marginparwidth
\newdimen\marginparsep
\newdimen\marginparpush
% \end{macrocode}
% \end{oldcomments}
%
% \begin{macro}{\AtBeginDvi}
% \changes{v1.1c}{1994/11/05}
% {Added macro}
% \begin{macro}{\@begindvibox}
% \changes{v1.1c}{1994/11/05}
% {Added macro}
% \changes{v1.1f}{1994/11/14}{Use normal box register: why a box?}
% \changes{v1.1l}{1995/04/24}{Add \cs{vbox} latex/1392}
%
% We use a box register in which to put
% stuff that must appear before anything else in the
% |.dvi| file.
%
% The stuff in the box should not add any typeset material to the
% page when it is unboxed.
% \begin{macrocode}
\newbox\@begindvibox
\def \AtBeginDvi #1{%
\global \setbox \@begindvibox
\vbox{\unvbox \@begindvibox #1}%
}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@maxdepth}
% This is not the right place to set this; it needs to be set in a
% class/style file when |\maxdepth| is set.
%
% Also, many settings to |\maxdepth| should be to |\@maxdepth|,
% probably?
% \task{All}{Sort out maxdepth: both should be set in the class files.}
% \begin{macrocode}
\newdimen\@maxdepth
\@maxdepth = \maxdepth
% \end{macrocode}
% \end{macro}
% \begin{macro}{\paperheight}
% \changes{v0.1a}{1993/11/23}{Register added}
% \begin{macro}{\paperwidth}
% \changes{v0.1a}{1993/11/23}{Register added}
% New |\paper|\ldots\ registers.
% \begin{macrocode}
\newdimen\paperheight
\newdimen\paperwidth
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\if@insert}
% \begin{macro}{\if@fcolmade}
% \begin{macro}{\if@specialpage}
% \begin{macro}{\if@firstcolumn}
% \begin{macro}{\if@twocolumn}
% \begin{macro}{\if@twoside}
% \begin{macro}{\if@reversemarginpar}
% \begin{macro}{\if@mparswitch}
% \begin{macro}{\col@number}
% \changes{v1.0n}{1994/04/30}{Added \cs{col@number}}
% Local switches first:
% \begin{macrocode}
\newif \if@insert
% \end{macrocode}
% These should definitely be global:
% \begin{macrocode}
\newif \if@fcolmade
\newif \if@specialpage \@specialpagefalse
% \end{macrocode}
% These should be global but are not always set globally in other
% files.
% \begin{macrocode}
\newif \if@firstcolumn \@firstcolumntrue
\newif \if@twocolumn \@twocolumnfalse
% \end{macrocode}
% Not sure about these: two questions.
% Should things which must apply to a whole doument be local or
% global (they probably should be `preamble only' commands)?
% Are these three such things?
% \begin{macrocode}
\newif \if@twoside \@twosidefalse
\newif \if@reversemargin \@reversemarginfalse
\newif \if@mparswitch \@mparswitchfalse
% \end{macrocode}
% This counter has been imported from `multicol'.
% \begin{macrocode}
\newcount \col@number
\col@number \@ne
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{oldcomments}
% INTERNAL REGISTERS
%
% \begin{macrocode}
\newcount\@topnum
\newdimen\@toproom
\newcount\@dbltopnum
\newdimen\@dbltoproom
\newcount\@botnum
\newdimen\@botroom
\newcount\@colnum
\newdimen\@textmin
\newdimen\@fpmin
\newdimen\@colht
\newdimen\@colroom
\newdimen\@pageht
\newdimen\@pagedp
\newdimen\@mparbottom \@mparbottom\z@
\newcount\@currtype
\newbox\@outputbox
\newbox\@leftcolumn
\newbox\@holdpg
% \end{macrocode}
%
% \begin{macrocode}
\def\@thehead{\@oddhead} % initialization
\def\@thefoot{\@oddfoot}
% \end{macrocode}
% \end{oldcomments}
%
% \begin{macro}{\clearpage}
% \changes{v1.1r}{1995/10/11}{Added a check so that it does not lose
% the argument of \cs{twocolumn[...]}}
%
% The tests at the beginning are an experimental attempt to avoid a
% completely empty page after a |\twocolumn[...]|. This prevents the
% text from the argument vanishing into a float box, never to be seen
% again. We hope that it does not produce wrong formatting in other
% cases.
% \changes{v1.1v}{1996/07/26}{add number of missing percents}
% \begin{macrocode}
\def\clearpage{%
\ifvmode
\ifnum \@dbltopnum =\m@ne
\ifdim \pagetotal <\topskip
\hbox{}%
\fi
\fi
\fi
\newpage
\write\m@ne{}%
\vbox{}%
\penalty -\@Mi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\cleardoublepage}
%
% \begin{macrocode}
\def\cleardoublepage{\clearpage\if@twoside \ifodd\c@page\else
\hbox{}\newpage\if@twocolumn\hbox{}\newpage\fi\fi\fi}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\onecolumn}
% \changes{v1.0n}{1994/04/30}{Added setting of \cs{col@number}}
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def\onecolumn{%
\clearpage
\global\columnwidth\textwidth
\global\hsize\columnwidth
\global\linewidth\columnwidth
\global\@twocolumnfalse
\col@number \@ne
\@floatplacement}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\newpage}
% \changes{v1.1x}{1996/09/29}{Checks for noskipsec and inlabel added}
% \changes{v1.1x}{1996/09/29}{Checks for noskipsec and inlabel added}
% \changes{v1.1y}{1996/09/30}{Checks for noskipsec and inlabel removed
% pending further tests}
% \changes{v1.1z}{1996/10/24}{Better checks for noskipsec and
% inlabel added, plus nobreak}
% \changes{v1.2a}{1996/10/25}{Reset all flags explicitly}
% The two checks at the beginning ensure that an item label or
% run-in section title immediately before a |\newpage| get printed
% on the correct page, the one before the page break.
%
% All three tests are largely to make error processing more robust;
% that is why they all reset the flags explicitly, even when it
% would appear that this would be done by a |\leavevmode|.
% \begin{macrocode}
\def \newpage {%
\if@noskipsec
\ifx \@nodocument\relax
\leavevmode
\global \@noskipsecfalse
\fi
\fi
\if@inlabel
\leavevmode
\global \@inlabelfalse
\fi
\if@nobreak \@nobreakfalse \everypar{}\fi
\par
\vfil
\penalty -\@M}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@emptycol}
% \changes{v1.0n}{1994/04/30}{Empty column action added:
% \cs{@emptycol}}
% It may be better to use an invisible rule rather than an empty
% box here.
% \begin{macrocode}
\def \@emptycol {\vbox{}\penalty -\@M}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\twocolumn}
% \begin{macro}{\@topnewpage}
% \changes{v1.0f}{1993/12/05}{Commands changed}
% \changes{v1.0g}{1993/12/06}{\cs{@floatplacement} placement bug
% fixed}
% \changes{v1.0j}{1993/12/17}{check for vsize too small added}
% \changes{v1.2c}{1997/11/09}{Documentation of vsize check enhanced}
% There are several bug fixes to the two-column stuff here.
%
% \changes{v1.0n}{1994/04/30}{Added setting of \cs{col@number}}
% \begin{macrocode}
\def \twocolumn {%
\clearpage
\global\columnwidth\textwidth
\global\advance\columnwidth-\columnsep
\global\divide\columnwidth\tw@
\global\hsize\columnwidth
\global\linewidth\columnwidth
\global\@twocolumntrue
\global\@firstcolumntrue
\col@number \tw@
% \end{macrocode}
% There is no reason to put a |\@dblfloatplacement| here since
% |\@topnewpage| ignores these settings.
% The |\@floatplacement| is needed in case this comes after some
% changes.
% \changes{v1.0h}{1993/12/12}{braces removed}
% \begin{macrocode}
\@ifnextchar [\@topnewpage\@floatplacement
}
% \end{macrocode}
%
% Note that here, getting a box from the freelist can assume
% success since this comes just after a |\clearpage|.
% \changes{v1.0n}{1994/04/30}{Added setting of \cs{col@number}}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Use \cs{color@begingroup} for colour}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Use \cs{normalcolor}}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Extra box added to remove colour resetting from vmode}
% \changes{v1.1b}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1i}{1994/11/21}{Changed to \cs{color@vbox}}
% \changes{v1.1z}{1996/10/24}{Added \cs{@nodocument} to trap
% \cs{twocolumn} in the preamble}
% \begin{macrocode}
\long\def \@topnewpage [#1]{%
\@nodocument
\@next\@currbox\@freelist{}{}%
\global \setbox\@currbox
\color@vbox
\normalcolor
\vbox {%
\hsize\textwidth
\@parboxrestore
\col@number \@ne
#1%
\vskip -\dbltextfloatsep
}%
\color@endbox
% \end{macrocode}
% Added size test and warning message; perhaps we should use
% an error message.
% \changes{v1.0l}{1994/03/15}{Corrected and amended warning message}
% \changes{v1.0m}{1994/04/24}{Warning message removed as it will be
% generated later}
% \begin{macrocode}
\ifdim \ht\@currbox>\textheight
\ht\@currbox \textheight
\fi
% \end{macrocode}
% This next line is not essential but it is more robust to make this
% value non-zero, in case of weird errors.
%
% This next bit is what is needed from |\@addtodblcol|, plus some
% extra checks for error trapping.
% \begin{macrocode}
\global \count\@currbox \tw@
\@tempdima -\ht\@currbox
\advance \@tempdima -\dbltextfloatsep
\global \advance \@colht \@tempdima
\ifx \@dbltoplist \@empty
\else
\@latexerr{Float(s) lost}\@ehb
\let \@dbltoplist \@empty
\fi
\@cons \@dbltoplist \@currbox
% \end{macrocode}
% This setting of |\@dbltopnum| is used only to change the
% typesetting in\\ |\@combinedblfloats|.
% \begin{macrocode}
\global \@dbltopnum \m@ne
%<*trace>
\tr@ce{dbltopnum set to -1 (= \the \@dbltopnum) (topnewpage)}%
%</trace>
% \end{macrocode}
% At points such as this we need to check that there is still a
% minimal amount of room left on the page; this uses an arbitrary
% small value at present; but note that this value is larger than
% that used when checking that page is too full of normal floats.
%
% If there is little room left we just force a page-break, OK?
% This involves producing two empty columns. The second empty
% column may be produced by |\output|, in which case an extra,
% misleading, warning will be generated, OK? (This happens only
% when there is too little room left on the page for any float.)
% Otherwise (\ie if the size is such that it is allowed as a normal
% float) the extra |\@emptycol| will be invoked in the second
% column by the conditional code guarded by the |\if@firstcolumn|
% test.
%
% I now think that the cut-off point here should be |3\baselineskip|,
% but we make it a bit less so that 3 lines of text will be
% allowed, OK?
%
% Since this happens only when there is nothing on the page but the
% `top-box', the empty box should not cause any problem other than
% some overfull box messages, which is not entirely misleading.
%
% Here we need two page-ends since both columns need to be empty.
% \task{???}{Make it less arbitrary?}
% \changes{v1.0j}{1993/12/17}{Page room test added}
% \changes{v1.0l}{1994/03/15}{Warning added: it should be improved}
% \changes{v1.0m}{1994/04/24}{Message changed to give more info}
% \changes{v1.0n}{1994/04/30}{Message changed for Frank}
% \changes{v1.0n}{1994/04/30}{Empty column action added:
% \cs{@emptycol}}
% \changes{v1.0n}{1994/04/30}{Cut-off point changed to
% 3\cs{baselineskip}}
% \changes{v1.1t}{1996/05/24}{Cut-off point changed to
% 2.5\cs{baselineskip}}
% \begin{macrocode}
\ifdim \@colht<2.5\baselineskip
\@latex@warning@no@line {Optional argument of \noexpand\twocolumn
too tall on page \thepage}%
\@emptycol
\if@firstcolumn
\else
\@emptycol
\fi
\else
\global \vsize \@colht
\global \@colroom \@colht
\@floatplacement
\fi
}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% \begin{macro}{\output}
% \changes{v1.0f}{1993/12/05}{Command changed}
% \begin{macro}{\@specialoutput}
% \changes{v0.1c}{1993/11/23}{Command changed}
% \changes{v1.0f}{1993/12/06}{Unboxing of 255 added to rescue writes}
% This needs some small adjustments. We cannot
% guarantee that the float mechanism will interact correctly with
% this stuff, but that mecahnism does not always work properly
% with footnotes already.
%
% RmS 91/09/29:
%
% added reset of |\par| to the output routine.
% This avoids problems when the output routine is
% called within a list where |\par| may be a no-op.
%
% \begin{macrocode}
\output {%
\let \par \@@par
\ifnum \outputpenalty<-\@M
\@specialoutput
\else
\@makecol
\@opcol
% \end{macrocode}
% Moved to |\@opcol|: |\@floatplacement|.
% \begin{macrocode}
\@startcolumn
% \end{macrocode}
% This loop could be replaced by an |\expandafter| tail
% recursion in |\@startcolumn|.
% \begin{macrocode}
\@whilesw \if@fcolmade \fi
{%
%<*trace>
\tr@ce{PAGE: float \if@twocolumn column \else page \fi
completed}%
%</trace>
\@opcol\@startcolumn}%
\fi
\ifnum \outputpenalty>-\@Miv
% \end{macrocode}
% At points such as this we need to check that there is still a
% minimal amount of room left on the page; this uses an arbitrary
% small value at present. If there is little room left we just
% force a page-break, OK?
%
% This bit is essential only if a float has just been processed so
% maybe it should be moved; but this is the natural place at which
% to set the vsize and a test would need to be done anyway. A
% check has been added to ensure that there really has been a
% change in the value of |\@colroom|.
%
% Since this happens only when there is nothing on the page but
% floats, the empty box should not cause any problem other than
% some overfull box messages, which is not entirely misleading.
%
% The twocolumn case does not need any extra code here since this
% is the |\output| itself; in the second column there will still
% not be enough room left so |\@emptycol| will be executed again
% when the OR is called by the-page builder when it gets to the
% penalty inserted by the first execution. (The page-builder is
% never invoked whilst the OR is being executed since it builds a
% inner vlist; thus any conditional code for the two-column case
% within |\output| may not get executed with the correct value of
% |\if@firstcolumn|.
%
% \task{???}{Make it less arbitrary?}
% \changes{v1.0j}{1993/12/17}{Page room test added}
% \changes{v1.0m}{1994/04/24}{Message changed to give more info and
% `top' removed}
% \changes{v1.0n}{1994/04/30}{Extra empty column added for
% twocolumn case (wrong, see below)}
% \changes{v1.0n}{1994/04/30}{Extra empty column added for
% twocolumn case}
% \changes{v1.0n}{1994/04/30}{Empty column action added:
% \cs{@emptycol}}
% \changes{v1.0n}{1994/04/30}{Cut-off point changed to
% 2\cs{baselineskip}}
% \changes{v1.1t}{1996/05/24}{Cut-off point changed to
% 1.5\cs{baselineskip}}
% \changes{v1.1t}{1996/05/24}{Check that \cs{@colroom} is less
% than \cs{vsize}, indicating that a float has been added}
% \changes{v1.1u}{1996/05/25}{Correct the above check}
% \changes{v1.2c}{1997/11/09}{Remove incorrect code: only one
% \cs{@emptycol} is needed here}
% \begin{macrocode}
\ifdim \@colroom<1.5\baselineskip
\ifdim \@colroom<\textheight
\@latex@warning@no@line {Text page \thepage\space
contains only floats}%
\@emptycol
% \if@twocolumn
% \if@firstcolumn
% \else
% \@emptycol
% \fi
% \fi
\else
\global \vsize \@colroom
\fi
\else
\global \vsize \@colroom
\fi
\else
\global \vsize \maxdimen
\fi
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
%
% \begin{oldcomments}
% CHANGES TO \@specialoutput:
% * \penalty\z@ changed to \penalty\interlinepenalty so \samepage
% works properly with figure and table environments.
% (Changed 23 Oct 86)
%
% * Definition of \@specialoutput changed 26 Feb 88 so \@pageht and
% \@pagedp aren't changed for a marginal note.
% (Change suggested by Chris Rowley.)
% \end{oldcomments}
%
% \begin{macrocode}
%<*2ekernel|def1|autoload|fltrace>
\gdef\@specialoutput{%
\ifnum \outputpenalty>-\@Mii
\@doclearpage
\else
\ifnum \outputpenalty<-\@Miii
\ifnum \outputpenalty<-\@MM \deadcycles \z@ \fi
\global \setbox\@holdpg \vbox {\unvbox\@cclv}%
\else
% \end{macrocode}
% Note that |\boxmaxdepth| should not be set here since we wish to
% record the natural depth of the holdpg box.
%
% This is changed so as to not lose anything, such as writes
% and marks, which may get into box 255 and should be returned to
% the list. This should only happen when the first penalty in the
% mechanism is discarded and therefore |\@holdpg| should always be
% void in this case. This can happen because a penalty is
% discarded whenever there is no box on the list.
%
% It was just: |\setbox\@tempboxa \box \@cclv|.
%
% The last box which is removed is the box put there by the
% double-penalty mechanism. The |\unskip| then removes the
% |\topskip| which is put there since the box is the first on the
% page.
% \task{CAR/FMi}{Is it more efficient to check whether the holdpg box
% is void and then act accordingly?}
% \begin{macrocode}
\global \setbox\@holdpg \vbox{%
\unvbox\@holdpg
\unvbox\@cclv
% \end{macrocode}
% We must now remove the box added by the float mechanism and the
% |\topskip| glue therefore added above it by \TeX.
% \begin{macrocode}
\setbox\@tempboxa \lastbox
\unskip
}%
% \end{macrocode}
% These two are needed as separate dimensions only by
% |\@addmarginpar|; for other purposes we put the whole size into
% |\@pageht| (see below).
% \begin{macrocode}
\@pagedp \dp\@holdpg
\@pageht \ht\@holdpg
\unvbox \@holdpg
\@next\@currbox\@currlist{%
\ifnum \count\@currbox>\z@
% \end{macrocode}
% Putting the whole size into |\@pageht| (see above).
% \begin{macrocode}
\advance \@pageht \@pagedp
\ifvoid\footins \else
\advance \@pageht \ht\footins
\advance \@pageht \skip\footins
\advance \@pageht \dp\footins
\fi
%<*2ekernel|def1>
\ifvbox \@kludgeins
% \end{macrocode}
% We want to make the adjustment due to this insert only if the
% non-star form is used. The *-form will probably not work with
% floats, but maybe it still could make some adjustment here even
% so?
% \begin{macrocode}
\ifdim \wd\@kludgeins=\z@
\advance \@pageht \ht\@kludgeins
%<*trace>
\tr@ce {Extra size added: \the \ht\@kludgeins}%
%</trace>
\fi
\fi
%</2ekernel|def1>
% \end{macrocode}
% This version puts the inserts back just before the additional
% material; it could be moved earlier, before unboxing the
% page-so-far. Neither is guaranteed not to put things on the wrong
% page. This version is similar to the original version.
% \begin{macrocode}
\@reinserts
\@addtocurcol
\else
\@reinserts
\@addmarginpar
\fi
}\@latexbug
% \end{macrocode}
% A 2e change: use |\addpenalty| instead of |\penalty| here. Some
% penalty is needed to create a potential break-point immediately
% after the reinerts (or the marginal). Otherwise there can be no
% possibility to break here and this can cause the reinserts or the
% marginal to appear on the next page (which is often incorrect).
% However, if the nobreak flag is true, a |\nobreak| must be
% correct.
% \changes{v1.1i}{1994/11/21}{Added \cs{if@nobreak} test}
% \changes{v1.1z}{1996/10/24}{Added \cs{nobreak} as appropriate}
% \begin{macrocode}
\ifnum \outputpenalty<\z@
\if@nobreak
\nobreak
\else
\addpenalty \interlinepenalty
\fi
\fi
\fi
\fi
}
%</2ekernel|def1|autoload|fltrace>
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@doclearpage}
% \task{CAR/FMi}{Investigate better float clearance}
% \task{CAR/FMi}{Put non-boxes back in the `right place'}
% This is a very much an emergency action, just dumping everything:
% footnotes first then floats. A more sophisticated version is
% needed.
%
% Also, it puts any left-over non-boxes (writes, specials, etc.) back
% after any float pages created: this is a bug.
%
% \begin{macrocode}
%<*2ekernel|autoload>
\def \@doclearpage {%
\ifvoid\footins
\setbox\@tempboxa\vsplit\@cclv to\z@ \unvbox\@tempboxa
\setbox\@tempboxa\box\@cclv
\xdef\@deferlist{\@toplist\@botlist\@deferlist}%
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\global \let \@toplist \@empty
\global \let \@botlist \@empty
\global \@colroom \@colht
\ifx \@currlist\@empty
\else
\@latexerr{Float(s) lost}\@ehb
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\global \let \@currlist \@empty
\fi
\@makefcolumn\@deferlist
\@whilesw\if@fcolmade \fi{\@opcol\@makefcolumn\@deferlist}%
\if@twocolumn
\if@firstcolumn
\xdef\@dbldeferlist{\@dbltoplist\@dbldeferlist}%
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\global \let \@dbltoplist \@empty
\global \@colht \textheight
\begingroup
\@dblfloatplacement
\@makefcolumn\@dbldeferlist
\@whilesw\if@fcolmade \fi{\@outputpage
\@makefcolumn\@dbldeferlist}%
\endgroup
\else
\vbox{}\clearpage
\fi
\fi
\else
\setbox\@cclv\vbox{\box\@cclv\vfil}%
\@makecol\@opcol
\clearpage
\fi
}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@opcol}
% \changes{v1.0f}{1993/12/05}{Command changed}
% \changes{v1.0f}{1993/12/05}{Hook added}
% \changes{v1.0j}{1993/12/17}{Hook removed}
% Several changes in detail here.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def \@opcol {%
\if@twocolumn
\@outputdblcol
\else
\@outputpage
%<*trace>
\tr@ce{PAGE: one column (float? see above) page completed}%
%</trace>
% \end{macrocode}
% Not needed since it comes after |\@outputpage|:
% \begin{macrocode}
% \global\@colht\textheight
\fi
% \end{macrocode}
% These do not need to be done every time |\@opcol| is used: they
% should be grouped together since they all need to be done at the
% end of the non-special output routine, or at the end of a clearpage
% one.
% \begin{macrocode}
\global \@mparbottom \z@ \global \@textfloatsheight \z@
\@floatplacement
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@makecol}
% \changes{v0.1c}{1993/11/23}{Command changed}
% \changes{v1.0b}{1993/11/29}{\cs{@makespecialcolbox} added}
% We must rewrite this macro to alllow for variations in page-makeup
% required by changes in page-length.
%
% This uses a different macro if a special-length column is being
% produced.
%
% \begin{macrocode}
%<*2ekernel|def1|autoload>
\gdef \@makecol {%
\ifvoid\footins
\setbox\@outputbox \box\@cclv
\else
\setbox\@outputbox \vbox {%
% \end{macrocode}
% This |\boxmaxdepth| setting is to ensure that deep footnotes
% do not overwrite the footer (on account of the negative skip
% added later): it should use |\@maxdepth| otherwise the chnage is
% pointless when there are footnotes.
% \task{CAR}{Investigate providing an option to put the footnotes
% below the bottom floats.}
%
% But see also its use when combining floats.
% \changes{v1.0l}{1994/03/15}{\cs{maxdepth} changed to \cs{@maxdepth}}
% \begin{macrocode}
\boxmaxdepth \@maxdepth
\unvbox \@cclv
% \end{macrocode}
%
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Colour resetting moved to here}
% \begin{macrocode}
\vskip \skip\footins
\color@begingroup
\normalcolor
\footnoterule
\unvbox \footins
\color@endgroup
}%
\fi
% \end{macrocode}
% The h floats have now been finally committed to this page so we
% can reset their list. The top and bottom floats are then added
% to the page.
% \begin{macrocode}
\xdef\@freelist{\@freelist\@midlist}%
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\global \let \@midlist \@empty
\@combinefloats
% \end{macrocode}
% The variations start here in case |\enlargethispage| has
% been used.
% \begin{macrocode}
%<*2ekernel|def1>
\ifvbox\@kludgeins
\@makespecialcolbox
\else
%</2ekernel|def1>
% \end{macrocode}
% This extra reboxing is only needed to add the
% |\@texttop| and |\@textbotttom| but this could be done earlier,
% when the floats are added.
%
% The |\boxmaxdepth| resetting here will have no effect unless
% |\@textbottom| ends with a box or rule. So is this (or possibly
% |\@maxdepth|) the correct value?
%
% The |\vskip -\dimen@|
% ensures that the visible depth of the box does not
% affect the placement of anything on the page.
% Thus very deep pages will overprint the footer; but these should
% have been prevented by suitable settings of the maxdepths at
% appropriate times.
%
% If |\@textbottom| ends with a box or rule of non-zero depth
% then this skip adjustemnt should be done again after it.
%
% I think that the final boxing of the main text page could have a
% common ending which may make it simpler to see what is going on.
%
% This needs further investigation, especially in the `special
% case'.
% \task{CAR}{Further investigation of makecol}
%
% Also, the |\boxmaxdepth| setting here affects what happens wthin
% |\@texttop| and |\@textbottom|, should it? Is it needed at all?
% \changes{v1.0l}{1994/03/15}{Removed boxmaxdepth setting.}
%
% RmS 91/10/22: Replaced |\dimen128| by |\dimen@|.
%
% \begin{macrocode}
\setbox\@outputbox \vbox to\@colht {%
% \boxmaxdepth \maxdepth %??
\@texttop
\dimen@ \dp\@outputbox
\unvbox \@outputbox
\vskip -\dimen@
\@textbottom
}%
%<*2ekernel|def1>
\fi
%</2ekernel|def1>
\global \maxdepth \@maxdepth
}
%</2ekernel|def1|autoload>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@reinserts}
% \changes{v1.0e}{1993/12/01}{Command added}
% This is the code which reinserts the inserts. It puts them all
% in one place; this can make some of them come out on the wrong
% page.
% It has been put into a separate macro to expidite experimentation.
% \begin{macrocode}
%<*2ekernel|def1|autoload>
\gdef \@reinserts{%
\ifvoid\footins\else\insert\footins{\unvbox\footins}\fi
%<+2ekernel|def1> \ifvbox\@kludgeins\insert\@kludgeins
%<+2ekernel|def1> {\unvbox\@kludgeins}\fi
}
%</2ekernel|def1|autoload>
% \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\@makespecialcolbox}
% \changes{v1.0b}{1993/11/29}{Command added}
% This implements certain variations in page-makeup.
% \begin{macrocode}
%<*2ekernel|def1|fltrace>
\gdef \@makespecialcolbox {%
%<*trace>
\tr@ce{Kludgeins ht \the\ht\@kludgeins\space
dp \the\dp\@kludgeins\space
wd \the\wd\@kludgeins}%
%</trace>
% \end{macrocode}
% First we find the natural height of the column.
%
% See above for discussion of what is happening here.
%
% This needs further investigation, especially in this `special
% case'.
% \changes{v1.0k}{1994/02/08}{boxmaxdepth setting removed}
% \begin{macrocode}
\setbox\@outputbox \vbox {%
\@texttop
\dimen@ \dp\@outputbox
\unvbox\@outputbox
\vskip-\dimen@
}%
\@tempdima \@colht
\ifdim \wd\@kludgeins>\z@
% \end{macrocode}
% Note that in this case (the *-version), the height of the
% |\@kludgeins| box is not used since its value is somewhat
% arbitrary: it need only be big enough to ensure that the
% page-break is not taken prematurely.
%
% Here we calculate how much vertical space needs to be added in
% order to enable the column to fit into a box of size |\@colht|
% using the best information we have about the amount of shrink
% available (another thing which is known internally about a box,
% but cannot be accessed at the \TeX{} level!).
%
% This needs \TeX3 otherwise |\pageshrink| is zero anyway; it may
% not be exactly the figure we wish as it is the total available
% from the all the material collected before the page-break
% decision is made. It will, we think, always be an overestimate
% of the actual shrink in the box; therefore this should always
% force the shortest possible column with the possibility of an
% overfull box.
%
% This should work for bothe flush- and ragged-bottom setting since
% it makes the contents no smaller than the size (|\@colht|) of the
% box into which they are put.
%
% Their should perhaps be an upper limit, of 0pt?, on the extra
% space added to force shrinking.
% \task{CAR}{Further investigation of kludge-* space}
%
% See above for a discussion of the |\boxmaxdepth| setting here.
%
% \changes{v1.0k}{1994/02/08}{boxmaxdepth setting added}
% \changes{v1.0l}{1994/03/15}{Removed boxmaxdepth setting.}
% \begin{macrocode}
\advance \@tempdima -\ht\@outputbox
\advance \@tempdima \pageshrink
%<*trace>
\tr@ce {Natural ht of col: \the \ht\@outputbox}%
\tr@ce {\string \@colht: \the \@colht}%
\tr@ce {Pageshrink added: \the \pageshrink}%
\tr@ce {Hence, space added: \the \@tempdima}%
%</trace>
\setbox\@outputbox \vbox to \@colht {%
% \boxmaxdepth \maxdepth
\unvbox\@outputbox
\vskip \@tempdima
\@textbottom
}%
% \end{macrocode}
% For the unstarred version, the final size of the page is
% precisely specified. Therefore, at least for the flush-bottom
% case, we need to ensure that, visually, it has this size exactly.
%
% Thus we calculate this size and set the material in a box of this
% size, which is then put into a box of size |\@colht| with |\vss|
% at the bottom.
% \begin{macrocode}
\else
\advance \@tempdima -\ht\@kludgeins
%<*trace>
\tr@ce {Natural ht of col: \the \ht\@outputbox}%
\tr@ce {\string \@colht: \the \@colht}%
\tr@ce {Extra size added: -\the \ht \@kludgeins}%
\tr@ce {Hence, height of inner box: \the \@tempdima}%
\tr@ce {Max? pageshrink available: \the \pageshrink}%
%</trace>
% \end{macrocode}
% This type of final packaging could be done always; this may
% simplify all of this page-makeup.
%
% It is not necessary to set |\boxmaxdepth| here since the
% |\@outputbox| ends with glue.
% \changes{v1.0k}{1994/02/03}{correct mistakes in the documentation}
% \begin{macrocode}
\setbox \@outputbox \vbox to \@colht {%
\vbox to \@tempdima {%
\unvbox\@outputbox
\@textbottom}%
\vss}%
\fi
% \end{macrocode}
% Finally we need to explicitly make the insert box void.
% \begin{macrocode}
{\setbox \@tempboxa \box \@kludgeins}%
}
%</2ekernel|def1|fltrace>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@texttop}
% \begin{macro}{\@textbottom}
% These do nothing as a default.
% \begin{macrocode}
%<*2ekernel|autoload>
\let \@texttop \relax
\let \@textbottom \relax
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@resetactivechars}
% \begin{macro}{\@activechar@info}
%
% \changes{v1.0n}{1994/04/30}{\cs{@activechar@warning} changed to
% \cs{@activechar@info}}
% RmS 93/09/06:
% added hook to protect against certain active characters in the
% output routine. Default checks are for active space and end-of-line.
% \changes{v1.0u}{1994/05/23}{Added \cs{MessageBreak}}
% \begin{macrocode}
\def\@activechar@info #1{%
\@latex@info@no@line {Active #1 character found while
output routine is active
\MessageBreak
This may be a bug in a package file
you are using}%
}
% \end{macrocode}
%
% Do not put any spaces in this next bit!
% \begin{macrocode}
\begingroup
\obeylines\obeyspaces%
\gdef\@resetactivechars{%
\def^^M{\@activechar@info{EOL}\space}%
\def {\@activechar@info{space}\space}}%
\endgroup
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@outputpage}
% \changes{v1.0f}{1993/12/05}{Command changed}
% \begin{macro}{\@shipoutsetup}
% \changes{v1.0f}{1993/12/05}{Command added}
% \changes{v1.1s}{1995/11/10}{Command removed}
% \begin{macro}{\@writesetup}
% \changes{v1.1s}{1995/11/10}{Command removed}
% \changes{v1.1o}{1995/07/21}{Command added}
% \changes{v1.0f}{1993/12/05}{\cs{@startpagehook} added}
% \changes{v1.0j}{1993/12/17}{---and then removed}
% \changes{v1.0p}{1994/05/12}{\cs{normalcolor}added}
% \changes{v1.0s}{1994/05/20}{Added setting of \cs{protect}
% during \cs{shipout}.}
% \changes{v1.0u}{1994/05/23}{Changed resetting of \cs{protect} after
% shipout to use \cs{aftergroup}}
% \changes{v1.1b}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1b}{1994/11/05}
% {Change protect settings for new-style, protect-free
% aux-files.}
% \changes{v1.1c}{1994/11/05}
% {Add new \cs{AtBeginDvi} concept}
% \changes{v1.1e}{1994/11/10}
% {Modify \cs{protect} setting}
% \changes{v1.1f}{1994/11/14}
% {Modify new \cs{AtBeginDvi} concept}
% \changes{v1.1o}{1995/07/21}
% {New, experimental, versions: need in-lining}
% \changes{v1.1s}{1995/11/10}{In-lined}
% \changes{v1.1w}{1996/09/21}{Added \cs{@parboxrestore} and made
% consequent deletions: wait for the howls of protest}
%
% The |\color@hbox| hooks here are used to avoid putting just a
% colour special into an otherwise empty box (in a header or
% footer). These boxes are often set to be completely empty and so
% adding a special produces a very underfull box message.
%
% There has been extensive tidying up of the old code here;
% including the removal of a level of grouping.
%
% The setting of |\protect| immediately before the |\shipout|
% is needed so that protected commands within |\write|s are
% handled correctly.
%
% Within shipout's vbox it is reset to its default value, |\relax|.
%
% Resetting it to its default value after the shipout has been
% completed (and the contents of the writes have been expanded)
% must be done by use of |\aftergroup|.
% This is because it must have the value |\relax|
% before macros coming from other uses of |\aftergroup| within
% this box are expanded.
%
% Putting this into the |\aftergroup| token list does not affect
% the definition used in expanding the |\write|s because the
% aftergroup token list is only constructed when popping the
% save-stack, it is not expanded until after the shipout is
% completed.
%
% Question: should things from an |\aftergroup| within the shipped
% out box be executed in the environment set up for the writes, or
% after it finishes?
%
% A lot of this code has been in-lined tp prevent mis-use of
% internal commands as hooks.
% \begin{macrocode}
\def\@outputpage{%
\begingroup % the \endgroup is put in by \aftergroup
% \end{macrocode}
% Now all the set-up stuff has been in-lined for Frank.
%
% First the stuff for the writes.
%
% From here \ldots\ was in the command |\@writesetup|.
% \begin{macrocode}
\let \protect \noexpand
% \end{macrocode}
%
% RmS 93/08/19: Redefined accents to allow changes in font encoding;
% but exactly why was this needed?
%
% The |\catcode`\ = 10| was removed as it was considered useless
% (presumably because nothing gets tokenised during shipout).
%
% This was put in as some error produced active spaces in a mark, I
% think.
%
% Why was the hyphen reset?
%
% \begin{macrocode}
\@resetactivechars
% \end{macrocode}
%
% \changes{v1.0q}{1994/05/16}{Changed setting of accents (FMi):
% with the new encoding setup they can use \cs{let}.
% It could also use the new internal commands?}
% \changes{v1.1l}{1995/04/24}{Reset \cmd\\ latex/1451 (DPC)}
% This next hook replaces the following:
% \begin{verbatim}
% \let\-\@dischyph
% \let\'\@acci\let\`\@accii\let\=\@acciii
% \let\\\@normalcr
% \let\par\@@par %% 15 Sep 87 (this was once inside the box)
% \end{verbatim}
% and it does more than they did; in particular it sets:
% \begin{verbatim}
% \parindent\z@
% \parskip\z@skip
% \everypar{}%
% \leftskip\z@skip
% \rightskip\z@skip
% \parfillskip\@flushglue
% \lineskip\normallineskip
% \baselineskip\normalbaselineskip
% \sloppy
% \end{verbatim}
%
% \begin{macrocode}
\@parboxrestore
% \end{macrocode}
% \ldots\ to here was in the command |\@writesetup|.
% \begin{macrocode}
\shipout \vbox{%
\set@typeset@protect
\aftergroup \endgroup
\aftergroup \set@typeset@protect
% correct? or just restore by ending
% the group?
% \end{macrocode}
% This first bit has been moved inside the shipped out box.
%
% Now the setup inside the shipped out box; this should conatin all
% the stuff that could only affect typesetting; other stuff may need
% to be reset for the writes also.
%
% From here \ldots\ was in the command |\@shipoutsetup|.
% \begin{macrocode}
\if@specialpage
\global\@specialpagefalse\@nameuse{ps@\@specialstyle}%
\fi
\if@twoside
\ifodd\count\z@ \let\@thehead\@oddhead \let\@thefoot\@oddfoot
\let\@themargin\oddsidemargin
\else \let\@thehead\@evenhead
\let\@thefoot\@evenfoot \let\@themargin\evensidemargin
\fi
\fi
% \end{macrocode}
%
% The rest was always inside the box.
%
% RmS 91/08/15: aded this line:
% \begin{macrocode}
\reset@font
% \end{macrocode}
% RmS 93/08/06 Added |\lineskiplimit=0pt| to guard against it being
% nonzero: e.g. by |\offinterlineskip| being in effect.
%
% There are probably lots of other things that may need resetting.
%
% \begin{macrocode}
\normalsize
% \end{macrocode}
% Reset the space factors.
% \changes{v1.2b}{1997/04/14}
% {Call \cs{normalsfcodes} (from patch file) latex/2404}
% \begin{macrocode}
\normalsfcodes
% \end{macrocode}
%
% Reset these here (previously reset separately for head and foot)
% \changes{v1.2b}{1997/04/14}
% {Move \cs{label} and \cs{index} (from patch file)}
% \begin{macrocode}
\let\label\@gobble
\let\index\@gobble
\let\glossary\@gobble
% \end{macrocode}
%
% \begin{macrocode}
\baselineskip\z@skip \lineskip\z@skip \lineskiplimit\z@
% \end{macrocode}
% \ldots\ to here was in the command |\@shipoutsetup|.
% \begin{macrocode}
\@begindvi
\vskip \topmargin
\moveright\@themargin \vbox {%
\setbox\@tempboxa \vbox to\headheight{%
\vfil
\color@hbox
\normalcolor
\hb@xt@\textwidth{\@thehead}%
\color@endbox
}% %% 22 Feb 87
\dp\@tempboxa \z@
\box\@tempboxa
\vskip \headsep
\box\@outputbox
\baselineskip \footskip
\color@hbox
\normalcolor
\hb@xt@\textwidth{\@thefoot}%
\color@endbox
}%
}%
% \endgroup now inserted by \aftergroup
\global \@colht \textheight
\stepcounter{page}%
% \end{macrocode}
% It is now clear that this does something useful, thanks to Piet
% van Oostrum. It is needed because a float page is made without
% using TeX's page-builder; thus the output routine is never called
% so the marks are not updated.
% \begin{macrocode}
\let\firstmark\botmark
}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@begindvi}
% \changes{v1.1c}{1994/11/05}
% {Added macro}
% \changes{v1.1f}{1994/11/14}{Use normal box register: why a box?}
%
% This unboxes stuff that must appear before anything else in the
% |.dvi| file, then returns that box register to the free list and
% cancels itself.
%
% The stuff in the box should not add any typeset material to the
% page.
% \begin{macrocode}
\def \@begindvi{%
\unvbox \@begindvibox
\global\let \@begindvi \@empty
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@combinefloats}
% \begin{macro}{\@cflt}
% \changes{v1.0h}{1993/12/12}{name changed}
% \begin{macro}{\@cflb}
% The |\boxmaxdepth| setting here was not made local to
% a box so was dangerous. It is needed only within the box made
% by |\@cflt| (and not normally even there), so it has been
% moved there; this also agrees with the original pseudcode.
%
% \changes{v1.0h}{1993/12/12}{boxmaxdepth setting moved}
% \begin{macrocode}
\def \@combinefloats {%
% \boxmaxdepth \maxdepth
\ifx \@toplist\@empty \else \@cflt \fi
\ifx \@botlist\@empty \else \@cflb \fi
}
% \end{macrocode}
%
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\def \@cflt{%
\let \@elt \@comflelt
\setbox\@tempboxa \vbox{}%
\@toplist
\setbox\@outputbox \vbox{%
\boxmaxdepth \maxdepth
\unvbox\@tempboxa
\vskip -\floatsep
\topfigrule
\vskip \textfloatsep
\unvbox\@outputbox
}%
\let\@elt\relax
\xdef\@freelist{\@freelist\@toplist}%
\global\let\@toplist\@empty
}
% \end{macrocode}
%
% \begin{macrocode}
\def \@cflb {%
\let\@elt\@comflelt
\setbox\@tempboxa \vbox{}%
\@botlist
\setbox\@outputbox \vbox{%
\unvbox\@outputbox
\vskip \textfloatsep
\botfigrule
\unvbox\@tempboxa
\vskip -\floatsep
}%
\let\@elt\relax
\xdef\@freelist{\@freelist\@botlist}%
\global \let \@botlist\@empty
}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@comflelt}
% \begin{macro}{\@comdblflelt}
% \begin{macro}{\@combinedblfloats}
%
% \begin{macrocode}
\def\@comflelt#1{\setbox\@tempboxa
\vbox{\unvbox\@tempboxa\box #1\vskip\floatsep}}
% \end{macrocode}
%
% \begin{macrocode}
\def\@comdblflelt#1{\setbox\@tempboxa
\vbox{\unvbox\@tempboxa\box #1\vskip\dblfloatsep}}
% \end{macrocode}
%
% \begin{macrocode}
\def \@combinedblfloats{%
\ifx \@dbltoplist \@empty
\else
\setbox\@tempboxa \vbox{}%
\let \@elt \@comdblflelt
\@dbltoplist
\let \@elt \relax
\xdef \@freelist {\@freelist\@dbltoplist}%
\global\let \@dbltoplist \@empty
\setbox\@outputbox \vbox to\textheight
% \end{macrocode}
%
% The setting of |\boxmaxdepth| here has no effect since the
% |\@outputbox| should already have depth zero. Even so, it would
% have no effect on the layout of the page.
% \changes{v1.0l}{1994/03/15}{Removed boxmaxdepth setting.}
% \begin{macrocode}
{%\boxmaxdepth\maxdepth %% probably not needed, CAR
\unvbox\@tempboxa\vskip-\dblfloatsep
% \end{macrocode}
% Here we need different typesetting if the top float comes from
% |\@topnewpage|.
% \changes{v1.0n}{1994/04/30}{Removed rule in topnewpage case}
% \begin{macrocode}
\ifnum \@dbltopnum>\m@ne
\dblfigrule
\fi
\vskip \dbltextfloatsep
\box\@outputbox
}%
\fi
}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \begin{macro}{\@startcolumn}
% \changes{v1.0f}{1993/12/05}{Command changed}
% \begin{macro}{\@startdblcolumn}
% \changes{v1.0f}{1993/12/05}{Command changed}
%
% We could combine (most of) these two into |\@startcol <list>|.
% Note that |\@xstartcol| was only used once (\ie in
% |\@startcolumn|); it has therefore been removed. This is not quite
% as efficient but it now has the same structure as
% |\@startdblcolumn|.
%
% The empty-list test has been moved to |\@tryfcolumn|.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def \@startcolumn {%
\global \@colroom \@colht
\@tryfcolumn \@deferlist
\if@fcolmade
%<*trace>
\tr@ce{PAGE: float \if@twocolumn column \else page \fi
completed}%
%</trace>
\else
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\begingroup
\let \reserved@b \@deferlist
\global \let \@deferlist \@empty
\let \@elt \@scolelt
\reserved@b
\endgroup
\fi
}
% \end{macrocode}
%
% This one does not need to set |\@colht|.
%
% \begin{macrocode}
\def \@startdblcolumn {%
% \end{macrocode}
% Not needed since this always comes after |\@outputpage|:
% \begin{macrocode}
% \global \@colht \textheight
\@tryfcolumn \@dbldeferlist
\if@fcolmade
%<*trace>
\tr@ce{PAGE: double float page completed}%
%</trace>
\else
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\begingroup
\let \reserved@b \@dbldeferlist
\global \let \@dbldeferlist \@empty
\let \@elt \@sdblcolelt
\reserved@b
\endgroup
\fi
}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@tryfcolumn}
% \changes{v1.0f}{1993/12/05}{Command changed}
% Now tests if its list is empty before any further exertion.
%
% \begin{macrocode}
\def \@tryfcolumn #1{%
\global \@fcolmadefalse
\ifx #1\@empty
\else
%<*trace>
\tr@ce{PAGE: try float \if@twocolumn column/page\else page\fi
---\string #1}%
\tr@ce{----- \string #1: #1}%
%</trace>
% \end{macrocode}
% \changes{v1.0h}{1993/12/12}{defs changed to lets}
% \begin{macrocode}
\xdef\@trylist{#1}%
\global \let \@failedlist \@empty
\begingroup
\let \@elt \@xtryfc \@trylist
\endgroup
\if@fcolmade
\@vtryfc #1%
\fi
\fi
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
%
% \end{macro}
%
% \begin{macrocode}
%<*2ekernel|autoload>
% \end{macrocode}
%
% \begin{macro}{\@scolelt}
% \begin{macrocode}
\def\@scolelt#1{\def\@currbox{#1}\@addtonextcol}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@sdblcolelt}
% \begin{macrocode}
\def\@sdblcolelt#1{\def\@currbox{#1}\@addtodblcol}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@vtryfc}
% \changes{v1.2d}{1997/11/19}{Reindent code, to be understandable(DPC).}
% \begin{macrocode}
\def\@vtryfc #1{%
\global\setbox\@outputbox\vbox{}%
\let\@elt\@wtryfc
\@flsucceed
\global\setbox\@outputbox \vbox to\@colht{%
\vskip \@fptop
\vskip -\@fpsep
\unvbox \@outputbox
\vskip \@fpbot}%
\let\@elt\relax
\xdef #1{\@failedlist\@flfail}%
\xdef\@freelist{\@freelist\@flsucceed}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@wtryfc}
% \begin{macrocode}
\def\@wtryfc #1{%
\global\setbox\@outputbox\vbox{%
\unvbox\@outputbox
\vskip\@fpsep
\box #1}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xtryfc}
% \changes{v1.1v}{1996/07/26}{remove \cs{global} before \cs{@test...}}
% \begin{macrocode}
\def\@xtryfc #1{%
\@next\reserved@a\@trylist{}{}%
\@currtype \count #1%
\divide\@currtype\@xxxii
\multiply\@currtype\@xxxii
\@bitor \@currtype \@failedlist
\@testfp #1%
\ifdim \ht #1>\@colht
\@testtrue
\fi
\if@test
\@cons\@failedlist #1%
\else
\@ytryfc #1%
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@ytryfc}
% \begin{macrocode}
\def\@ytryfc #1{%
\begingroup
\gdef\@flsucceed{\@elt #1}%
\global\let\@flfail\@empty
\@tempdima\ht #1%
\let\@elt\@ztryfc
\@trylist
\ifdim \@tempdima >\@fpmin
\global\@fcolmadetrue
\else
\@cons\@failedlist #1%
\fi
\endgroup
\if@fcolmade
\let\@elt\@gobble
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@ztryfc}
% \changes{v1.1v}{1996/07/26}{remove \cs{global} before \cs{@test...}}
% \begin{macrocode}
\def\@ztryfc #1{%
\@tempcnta \count#1%
\divide\@tempcnta\@xxxii
\multiply\@tempcnta\@xxxii
\@bitor \@tempcnta {\@failedlist \@flfail}%
\@testfp #1%
\@tempdimb\@tempdima
\advance\@tempdimb \ht#1%
\advance\@tempdimb\@fpsep
\ifdim \@tempdimb >\@colht
\@testtrue
\fi
\if@test
\@cons\@flfail #1%
\else
\@cons\@flsucceed #1%
\@tempdima\@tempdimb
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
%</2ekernel|autoload>
% \end{macrocode}
%
% The major changes for float suppression and the changes to the float
% mechanism to make it conform to the documentation are in these next
% macros.
%
% \begin{macro}{\@addtobot}
% \changes{v1.0f}{1993/12/05}{Command changed}
% Lots of changes.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def \@addtobot {%
%<*trace>
\tr@ce{***Start addtobot}%
%</trace>
\@getfpsbit 4\relax
%<*trace>
\tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi bot:
\the \@fpstype}%
%</trace>
\ifodd \@tempcnta
\@flsetnum \@botnum
\ifnum \@botnum>\z@
\@tempswafalse
\@flcheckspace \@botroom \@botlist
\if@tempswa
% \end{macrocode}
% This next line means that this page is produced with box 255
% having depth zero, rather than the normal maxdepth: is this
% needed, useful?
% \task{CAR/FMi}{Investigate resetting of maxdepth: I do not think it is
% necessary here; Frank does.}
% \begin{macrocode}
\global \maxdepth \z@
\@flupdates \@botnum \@botroom \@botlist
%<*trace>
\tr@ce{colroom (after-bot) = \the \@colroom}%
\tr@ce{colnum (after-bot) = \the \@colnum}%
\tr@ce{botnum (after-bot) = \the \@botnum}%
\tr@ce{***Success: bot}%
%</trace>
\@inserttrue
\fi
%<*trace>
\else
\tr@ce{Fail: botnum = \the \@botnum:
fpstype \the \@fpstype=ORD?}%
\ifnum \@fpstype<\sixt@@n
\tr@ce{ERROR: !b float not successful (addtobot)}%
\fi
%</trace>
\fi
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@addtotoporbot}
% \changes{v1.0f}{1993/12/05}{Command changed}
% Lots of changes.
%
% \begin{macrocode}
\def \@addtotoporbot {%
%<*trace>
\tr@ce{***Start addtotoporbot}%
%</trace>
\@getfpsbit \tw@
%<*trace>
\tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi top:
\the \@fpstype}%
%</trace>
\ifodd \@tempcnta
\@flsetnum \@topnum
\ifnum \@topnum>\z@
\@tempswafalse
\@flcheckspace \@toproom \@toplist
\if@tempswa
\@bitor\@currtype{\@midlist\@botlist}%
%<*trace>
\tr@ce{(mid+bot)list: \@midlist, \@botlist:
(addtotoporbot-before)}%
%</trace>
\if@test
%<*trace>
\tr@ce{type already on list: mid or bot---sent to addtobot}%
%</trace>
\else
\@flupdates \@topnum \@toproom \@toplist
%<*trace>
\tr@ce{colroom (after-top) = \the \@colroom}%
\tr@ce{colnum (after-top) = \the \@colnum}%
\tr@ce{topnum (after-top) = \the \@topnum}%
\tr@ce{***Success: top}%
%</trace>
\@inserttrue
\fi
\fi
%<*trace>
\else
\tr@ce{Fail: topnum = \the \@topnum: fpstype
\the \@fpstype=ORD?}%
\ifnum \@fpstype<\sixt@@n
\tr@ce{ERROR: !t float not successful (addtotoporbot)}%
\fi
%</trace>
\fi
\fi
\if@insert
\else
%<*trace>
\tr@ce{sent to addtobot (addtotoporbot)}%
%</trace>
\@addtobot
\fi
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@addtocurcol}
% \changes{v1.0f}{1993/12/05}{Command changed}
% \task{CAR}{Add rules around h floats for FMi}
% \task{CAR}{Investigate pagebreak option possibilities}
% Lots of changes.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace|flafter>
\def \@addtocurcol {%
%<*trace>
\tr@ce{***Start addtocurcol}%
%</trace>
\@insertfalse
\@setfloattypecounts
\ifnum \@fpstype=8
%<*trace>
\tr@ce{fpstype !p only (addtocurcol): \the \@fpstype = 8?}%
%</trace>
\else
\ifnum \@fpstype=24
%<*trace>
\tr@ce{fpstype p only (addtocurcol): \the \@fpstype = 24?}%
%</trace>
\else
\@flsettextmin
% \end{macrocode}
% This is a new adjustment which is quite a major change in
% functionality; but it implements the documentation.
% Note that |\@reqcolroom| will include the whole of the
% page-so-far, and hence includes |\@textfloatsheight| of floats,
% so before comparing it with |\@textmin|, we add this to
% |\@textmin| also.
% \begin{macrocode}
%<*trace>
\tr@ce{textfloatsheight (before) = \the \@textfloatsheight}%
%</trace>
\advance \@textmin \@textfloatsheight
\@reqcolroom \@pageht
% \end{macrocode}
% This line must be removed since |\@specialoutput| changed.
% \begin{macrocode}
% \advance \@reqcolroom \@pagedp
%<*trace>
\tr@ce{textmin + textfloatsheight: \the \@textmin}%
\tr@ce{page-so-far: \the \@reqcolroom}%
%</trace>
\ifdim \@textmin>\@reqcolroom
\@reqcolroom \@textmin
%<*trace>
\tr@ce{ORD? textmin being used}%
%</trace>
\fi
\advance \@reqcolroom \ht\@currbox
%<*trace>
\tr@ce{float size = \the \ht \@currbox (addtocurcol)}%
\tr@ce{colroom = \the \@colroom (addtocurcol)}%
\tr@ce{reqcolroom = \the \@reqcolroom (addtocurcol)}%
%</trace>
\ifdim \@colroom>\@reqcolroom
\@flsetnum \@colnum
\ifnum \@colnum>\z@
\@bitor\@currtype\@deferlist
%<*trace>
\tr@ce{deferlist: \@deferlist: (addtocurcol-before)}%
%</trace>
\if@test
%<*trace>
\tr@ce{type already on list: defer (addtocurcol)}%
%</trace>
\else
\@bitor\@currtype\@botlist
%<*trace>
\tr@ce{botlist: \@botlist: (addtocurcol-before)}%
%</trace>
\if@test
%<*trace>
\tr@ce{type already on list: bot---sent to addtobot}%
%</trace>
\@addtobot
\else
%<*trace>
\tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi
here: \the \@fpstype}%
%</trace>
\ifodd \count\@currbox
\advance \@reqcolroom \intextsep
\ifdim \@colroom>\@reqcolroom
\global \advance \@colnum \m@ne
\global \advance \@textfloatsheight \ht\@currbox
% \end{macrocode}
% This may sometimes give an overestimate.
% \begin{macrocode}
\global \advance \@textfloatsheight 2\intextsep
\@cons \@midlist \@currbox
%<*trace>
\tr@ce{***Success: here}%
\tr@ce{textfloatsheight (after-here) =
\the \@textfloatsheight}%
\tr@ce{colnum (after-here) = \the \@colnum}%
%</trace>
% \end{macrocode}
%
% CHANGE TO |\@addtocurcol|:
%
% |\penalty\z@| changed to |\penalty\interlinepenalty| so |\samepage|
% works properly with figure and table environments.
% (Changed 23 Oct 86)
%
% There is also an |\addpenalty\interlinepenalty| above.
%
% Since in 2e |\samepage| is no longer supported, these could be
% removed.
%
% Although it is best to use |\addvspace| in case two h floats come
% together, this makes other spacing more difficult to adjust; whereas
% if a user specifies two h floats together then they can more easily
% get the spacing correct by ad hoc commands.
%
% It is necessary to adjust for the addition of |\parskip| here in
% case the float is added betweeen paragraphs (\ie when in vertical
% mode).
%
% If the nobreak switch is true we need to reset it and clear
% |\everypar| sionce the float may not reset the flag and cannot reset
% the |\everypar| globally.
% \changes{v1.0l}{1994/03/15}{Changed \cs{addvspace} to \cs{vskip}}
% \changes{v1.1i}{1994/11/21}
% {Added \cs{if@nobreak} test before float box}
% \changes{v1.1z}{1996/10/24}{Added \cs{nobreak}, etc as appropriate}
%
% Typesetting starts here (we are in vertical mode).
% \begin{macrocode}
\if@nobreak
\nobreak
\@nobreakfalse
\everypar{}%
\else
\addpenalty \interlinepenalty
\fi
\vskip \intextsep
\box\@currbox
\penalty\interlinepenalty
\vskip\intextsep
\ifnum\outputpenalty <-\@Mii \vskip -\parskip\fi
% \end{macrocode}
% Typesetting ends here.
% \begin{macrocode}
\outputpenalty \z@
\@inserttrue
%<*trace>
\else
\tr@ce{Fail---no room at 2nd test of colroom
(addtocorcol \string\intextsep)}%
%</trace>
\fi
\fi
\if@insert
\else
%<*2ekernel|autoload|fltrace>
%<*trace>
\tr@ce{not here: sent to addtotoporbot}%
%</trace>
\@addtotoporbot
%</2ekernel|autoload|fltrace>
%<*!2ekernel&!autoload&!fltrace>
%<*trace>
\tr@ce{not here: sent to addtobot}%
%</trace>
\@addtobot
%</!2ekernel&!autoload&!fltrace>
\fi
\fi
\fi
%<*trace>
\else
\tr@ce{Fail: colnum = \the \@colnum:
fpstype \the \@fpstype=ORD?}%
\ifnum \@fpstype<\sixt@@n
\tr@ce{ERROR: BANG float not successful (addtocurcol)}%
\fi
%</trace>
\fi
%<*trace>
\else
\tr@ce{Fail---no room: fl box ht: \the \ht \@currbox
(addtocurcol)}%
%</trace>
\fi
\fi
\fi
\if@insert
\else
\@resethfps
%<*trace>
\tr@ce{put on deferlist (addtocurcol)}%
%</trace>
\@cons\@deferlist\@currbox
%<*trace>
\tr@ce{deferlist: \@deferlist: (addtocurcol-after)}%
%</trace>
\fi
}
%</2ekernel|autoload|fltrace|flafter>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@addtonextcol}
% \changes{v1.0f}{1993/12/05}{Command changed}
% Lots of changes.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def\@addtonextcol{%
\begingroup
%<*trace>
\tr@ce{***Start addtonextcol}%
%</trace>
\@insertfalse
\@setfloattypecounts
\ifnum \@fpstype=8
%<*trace>
\tr@ce{fpstype not curcol: \the \@fpstype = 8?}%
%</trace>
\else
\ifnum \@fpstype=24
%<*trace>
\tr@ce{fpstype not curcol: \the \@fpstype = 24?}%
%</trace>
\else
\@flsettextmin
%<*trace>
\tr@ce{text-so-far: 0pt (top of col)}%
%</trace>
\@reqcolroom \ht\@currbox
%<*trace>
\tr@ce{float size: \the \@reqcolroom (addtonextcol)}%
%</trace>
\advance \@reqcolroom \@textmin
%<*trace>
\tr@ce{colroom = \the \@colroom (addtonextcol)}%
\tr@ce{reqcolroom = \the \@reqcolroom (addtonextcol)}%
%</trace>
\ifdim \@colroom>\@reqcolroom
\@flsetnum \@colnum
\ifnum\@colnum>\z@
\@bitor\@currtype\@deferlist
%<*trace>
\tr@ce{deferlist: \@deferlist: (addtonextcol-before)}%
%</trace>
\if@test
%<*trace>
\tr@ce{type already on list: defer (addtonextcol)}%
%</trace>
\else
%<*trace>
\tr@ce{sent to addtotoporbot (addtonextcol)}%
%</trace>
\@addtotoporbot
\fi
\fi
%<*trace>
\else
\tr@ce{Fail---no room: fl box ht: \the \ht \@currbox
(addtonextcol)}%
%</trace>
\fi
\fi
\fi
\if@insert
\else
%<*trace>
\tr@ce{put back on deferlist (addtonextcol)}%
%</trace>
\@cons\@deferlist\@currbox
%<*trace>
\tr@ce{deferlist: \@deferlist: (addtonextcol-after)}%
%</trace>
\fi
%<*trace>
\tr@ce{End of addtonextcol -- locally counts:}%
\tr@ce{ col: \the \@colnum. top: \the \@topnum. bot: \the \@botnum.}%
%</trace>
\endgroup
%<*trace>
\tr@ce{End of addtonextcol -- globally counts:}%
\tr@ce{col: \the \@colnum. top: \the \@topnum. bot: \the \@botnum.}%
%</trace>
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@addtodblcol}
% \changes{v1.0f}{1993/12/05}{Command changed}
% Lots of changes.
%
% \begin{macrocode}
\def\@addtodblcol{%
\begingroup
%<*trace>
\tr@ce{***Start addtodblcol}%
%</trace>
\@insertfalse
\@setfloattypecounts
\@getfpsbit \tw@
%<*trace>
\tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi dbltop:
\the \@fpstype}%
%</trace>
\ifodd\@tempcnta
\@flsetnum \@dbltopnum
\ifnum \@dbltopnum>\z@
\@tempswafalse
\ifdim \@dbltoproom>\ht\@currbox
\@tempswatrue
%<*trace>
\tr@ce{Space OK: \@dbltoproom =
\the \@dbltoproom > \the \ht \@currbox
(dbltoproom)}%
%</trace>
\else
%<*trace>
\tr@ce{fpstype: \the \@fpstype (addtodblcol)}%
%</trace>
\ifnum \@fpstype<\sixt@@n
%<*trace>
\tr@ce{BANG float ignoring \@dbltoproom}%
\tr@ce{\@spaces \@dbltoproom = \the \@dbltoproom.
Ht float: \the \ht \@currbox-BANG}%
%</trace>
% \end{macrocode}
% Need to check that there is room on the page, using the local value
% of |\@textmin| to make the necessary adjustment to |\@dbltoproom|.
% \begin{macrocode}
\advance \@dbltoproom \@textmin
%<*trace>
\tr@ce{Local value of texmin: \the\@textmin}%
\tr@ce{\@spaces space on page = \the \@dbltoproom.
Ht float: \the \ht \@currbox-BANG}%
%</trace>
\ifdim \@dbltoproom>\ht\@currbox
\@tempswatrue
%<*trace>
\tr@ce{Space OK BANG: space on page = \the \@dbltoproom >
\the \ht \@currbox}%
\else
\tr@ce{fpstype: \the \@fpstype}%
\tr@ce{Fail---no room dbltoproom-BANG?:}%
\tr@ce{\@spaces space on page = \the \@dbltoproom.
Ht float: \the \ht \@currbox}%
%</trace>
\fi
\advance \@dbltoproom -\@textmin
%<*trace>
\else
\tr@ce{fpstype: \the \@fpstype}%
\tr@ce{Fail---no room dbltoproom-ORD?:}%
\tr@ce{\@spaces \@dbltoproom = \the \@dbltoproom.
Ht float: \the \ht \@currbox}%
%</trace>
\fi
\fi
\if@tempswa
\@bitor \@currtype \@dbldeferlist
%<*trace>
\tr@ce{dbldeferlist: \@dbldeferlist: (before)}%
%</trace>
\if@test
%<*trace>
\tr@ce{type already on list: dbldefer}%
%</trace>
\else
\@tempdima -\ht\@currbox
\advance\@tempdima
-\ifx \@dbltoplist\@empty \dbltextfloatsep \else
\dblfloatsep \fi
\global \advance \@dbltoproom \@tempdima
\global \advance \@colht \@tempdima
\global \advance \@dbltopnum \m@ne
\@cons \@dbltoplist \@currbox
%<*trace>
\tr@ce{dbltopnum (after) = \the \@dbltopnum}%
\tr@ce{***Success: dbltop}%
%</trace>
\@inserttrue
\fi
\fi
%<*trace>
\else
\tr@ce{Fail: dbltopnum = \the \@dbltopnum: fpstype
\the \@fpstype=ORD?}%
\ifnum \@fpstype<\sixt@@n
\tr@ce{ERROR: !t float not successful (addtodblcol)}%
\fi
%</trace>
\fi
\fi
\if@insert
\else
%<*trace>
\tr@ce{put on dbldeferlist}%
%</trace>
\@cons\@dbldeferlist\@currbox
%<*trace>
\tr@ce{dbldeferlist: \@dbldeferlist: (after)}%
%</trace>
\fi
%<*trace>
\tr@ce{End of addtodblcol -- locally count:}%
\tr@ce{ dbltop: \the \@dbltopnum.}%
%</trace>
\endgroup
%<*trace>
\tr@ce{End of addtodblcol -- globally count:}%
\tr@ce{dbltop: \the \@dbltopnum.}%
%</trace>
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\@addmarginpar}
% \begin{macrocode}
%<*2ekernel|autoload>
\def\@addmarginpar{\@next\@marbox\@currlist{\@cons\@freelist\@marbox
\@cons\@freelist\@currbox}\@latexbug\@tempcnta\@ne
\if@twocolumn
\if@firstcolumn \@tempcnta\m@ne \fi
\else
\if@mparswitch
\ifodd\c@page \else\@tempcnta\m@ne \fi
\fi
\if@reversemargin \@tempcnta -\@tempcnta \fi
\fi
\ifnum\@tempcnta <\z@ \global\setbox\@marbox\box\@currbox \fi
\@tempdima\@mparbottom
\advance\@tempdima -\@pageht
\advance\@tempdima\ht\@marbox
\ifdim\@tempdima >\z@
\@latex@warning@no@line {Marginpar on page \thepage\space moved}%
\else
\@tempdima\z@
\fi
\global\@mparbottom\@pageht
\global\advance\@mparbottom\@tempdima
\global\advance\@mparbottom\dp\@marbox
\global\advance\@mparbottom\marginparpush
\advance\@tempdima -\ht\@marbox
% \end{macrocode}
% Putting box movement inside the `marbox':
% \begin{macrocode}
\global\setbox \@marbox
\vbox {\vskip \@tempdima
\box \@marbox}%
\global \ht\@marbox \z@
\global \dp\@marbox \z@
% \end{macrocode}
% Sticking (rather than gluing:-) the `marbox' to the line above,
% changed vskip to kern:
% \begin{macrocode}
\kern -\@pagedp
\nointerlineskip
\hb@xt@\columnwidth
{\ifnum \@tempcnta >\z@
\hskip\columnwidth \hskip\marginparsep
\else
\hskip -\marginparsep \hskip -\marginparwidth
\fi
\box\@marbox \hss}%
% \end{macrocode}
% For this reason the following code can vanish:
%\begin{verbatim}
% \nobreak %% No longer needed. CAR92/12
% \vskip -\@tempdima %% No longer needed. CAR92/12
%\end{verbatim}
% \begin{macrocode}
\nointerlineskip
\hbox{\vrule \@height\z@ \@width\z@ \@depth\@pagedp}}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Kludgeins}
%
% This part of the file is part of the implementation of the following
% two new commands for \LaTeX2e{}.
%
%
% \begin{verbatim}
% \enlargethispage{<dim>}
% \end{verbatim}
%
% Adds |<dim>| to the height of the current column only. On the printed
% page the bottom of this column is extended downwards by exactly
% |<dim>| without having any effect on the placement of the footer; this
% may result in an overprinting.
%
% \begin{verbatim}
% \enlargethispage*{<dim>}
% \end{verbatim}
%
% Similar to |\enlargethispage| but it tries to squeeze the column to
% be printed in as small a space as possible, ie it uses any
% shrinkability in the column. If the column was not explicitly broken
% (\eg with |\pagebreak|) this may result in an overfull box message but
% execpt for this it will come out as expected (if you know what to
% expect).
%
% The star form of this command is dedicated to Leslie Lamport, the
% other we need for ourselves (FMi, CAR).
%
%
% \begin{macro}{\@kludgeins}
% \changes{v0.1c}{1993/11/23}{Insert added}
% The insert which makes \TeX{} do a lot of the necessary work.
% All we need to put into it is the amount by which the pagegoal
% should be changed.
% \begin{macrocode}
%<*2ekernel|def1>
\newinsert \@kludgeins
\global\dimen\@kludgeins \maxdimen
\global\count\@kludgeins 1000
%</2ekernel|def1>
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\enlargethispage}
% \begin{macro}{\enlargethispage*}
% \changes{v0.1c}{1993/11/23}{Commands added}
% The user command.
% \begin{macrocode}
%<*2ekernel|def1>
\gdef \enlargethispage {%
\@ifstar
{%
%<*trace>
\tr@ce{Enlarging page height * }%
%</trace>
\@enlargepage{\hbox{\kern\p@}}}%
{%
%<*trace>
\tr@ce{Enlarging page height exactly---}%
%</trace>
\@enlargepage\@empty}%
}
%</2ekernel|def1>
%<*autoload>
\def\enlargethispage{\@autoload{out1}\enlargethispage}
%</autoload>
% \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% \begin{macro}{\@enlargepage}
% \changes{v0.1c}{1993/11/23}{Command added}
% This actually inserts the insert, after checking for extreme
% values of the change.
% \begin{macrocode}
%<*2ekernel|def1>
\gdef\@enlargepage#1#2{%
%<*trace>
\tr@ce{\@spaces\@spaces by #2}%
%</trace>
\@tempskipa#2\relax
\ifdim \@tempskipa>.5\maxdimen
\@latexerr{Suggested\space extra\space height\space
(\the\@tempskipa)\space dangerously\space
large}\@eha
\else
\ifdim \vsize<.5\maxdimen
%<*trace>
\tr@ce {Kludgeins added--pagegoal before: \the\pagegoal}%
%</trace>
\@bsphack
\insert\@kludgeins{#1\vskip-\@tempskipa}%
\@esphack
% \end{macrocode}
% This next bit is for tracing only:
% \begin{macrocode}
%<*trace>
\ifvmode \par
\tr@ce {Kludgeins added--pagegoal after: \the \pagegoal}%
\fi
%</trace>
\else
\@latexerr{Page\space height\space already\space
too\space large}\@eha
\fi
\fi
}
%</2ekernel|def1>
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Float control}
%
% This part implements controllable floats and other changes
% to the float mechanism.
%
% It provides, at the doument level, the following command for
% inclusion in \LaTeX2e{}.
%
% \begin{verbatim}
% \suppressfloats
% \end{verbatim}
%
% This suppresses all further floats on the current page.
%
% With an optional argument it suppresses only floats only in certain
% positions on the current page.
% \begin{quote}
% |[t]|\quad suppresses only floats at the top of the page
% |[b]|\quad suppresses only floats at the bottom of the page
% \end{quote}
%
% It also enables the use of an extra specifier, {\tt !}, in the
% location optional argument of a float. If this is present then,
% just for this particular float, whenever it is processed by the float
% mechanism the followinhg are ignored:
%
% \begin{itemize}
% \item all restrictions on the number of floats which can appear;
% \item all explicit restrictions on the amount of space which should
% (not) be occupied by floats and/or text.
% \end{itemize}
%
% The mechanism will still attempt to ensure that pages are not
% overfull.
%
% These specifiers override, for the single float, the suppression
% commands described above.
%
%
% In its current form, it also suplies a reasonably exhaustive, and
% somewhat baroque, means of tracing some aspects of the float
% mechanism.
%
% More tracing.
% \begin{macro}{\tr@ce}
% \begin{macro}{\notrace}
% \begin{macro}{\tracefloats}
% \begin{macro}{\@traceval}
% \begin{macro}{\tracefloatvals}
% \begin{macro}{\@tracemessage}
% \changes{v1.0c}{1993/11/30}{Commands added}
% \changes{v1.0h}{1993/12/12}{Commands changed}
% \changes{v1.0j}{1993/12/17}{tracefloatvals made a document command}
% Set-up tracing for floats independent of other tracing as it
% produces mega-output. Default is no tracing.
% \changes{v1.1j}{1995/04/24}
% {Do not add to kernel unless `trace' specified}
% \task{???}{Make proper tracing module}
%
% \begin{macrocode}
%<*trace>
\def \@tracemessage #1{\typeout{LaTeX2e: #1}}
\def \tracefloats{\let \tr@ce \@tracemessage}
\def \notrace {\let \tr@ce \@gobble}
\notrace
\def \@traceval #1{\tr@ce{\string #1 = \the #1}}
\def \tracefloatvals{%
\@dblfloatplacement
\@floatplacement
\@traceval\@colnum
\@traceval\@colroom
\@traceval\@topnum
\@traceval\@toproom
\@traceval\@botnum
\@traceval\@botroom
\@traceval\@fpmin
\tr@ce{\string\textfraction = \textfraction}%
\@traceval\@dbltopnum
\@traceval\@dbltoproom
}
%</trace>
%<*flafter>
\providecommand\tr@ce[1]{}
%</flafter>
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\suppressfloats}
% \begin{macro}{\@flstop}
% \changes{v1.0f}{1993/12/05}{Commands added}
% Float suppression commands: these set the relevant counter
% globally to zero. Thus they are overridden for a particular float
% by an ! specifier.
%
% \begin{macrocode}
%<*2ekernel|autoload>
\def \suppressfloats {%
\@ifnextchar [%
\@flstop
{\global \@colnum \z@}%
}
% \end{macrocode}
% Maybe this should be a loop over |#1|?
% \begin{macrocode}
\def \@flstop [#1]{%
\if t#1%
\global \@topnum \z@
\fi
\if b#1%
\global \@botnum \z@
\fi
}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% Manipulation of float placement and type; both their strings and the
% corresponding count registers.
%
% \begin{macro}{\@fpstype}
% \begin{macro}{\@reqcolroom}
% \begin{macro}{\@textfloatsheight}
% \changes{v1.0f}{1993/12/05}{Commands added}
% First a new count register to go with |\@currtype|.
%
% Then a new skip register, for information needed to remove the
% |\@maxsep| conservatism: it is possible that this could use a
% temporary register.
%
% Finally a dimension register to hold the total height of in-text
% floats on the current page. This is needed to implement a
% major change in the functionality of |\@addtocurcol| which is,
% nevertheless, a bug fix.
% It is not local and therefore cannot be a temporary register.
%
% \begin{macrocode}
\newcount \@fpstype
\newdimen \@reqcolroom
\newdimen \@textfloatsheight
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@fpsadddefault}
% \changes{v1.0f}{1993/12/05}{Command added}
% Adds the default placement to what is already there.
%
% Should not need to change this, but could do it as follows:
% \begin{verbatim}
%\def \@fpsadddefault {%
% \@temptokena \expandafter\expandafter\expandafter
% {\csname fps@\@captype \endcsname}%
% \edef \reserved@a {\the\@temptokena}%
% \@onelevel@sanitize \reserved@a
% \edef \@fps {\@fps\reserved@a}%
%}
% \end{verbatim}
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def \@fpsadddefault {%
%<*trace>
\tr@ce{fps changed from: \@fps}%
%</trace>
\edef \@fps {\@fps\csname fps@\@captype \endcsname}%
\@latex@warning {%
No positions in optional float specifier.\MessageBreak
Default added (so using `\@fps')}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@setfloattypecounts}
% \changes{v1.0f}{1993/12/05}{Command added}
% Sets counters |\@fpstype| and |\@currtype|.
%
% BANG $==$ bit4 of $|\count\@currbox| = 0$.
%
% \begin{macrocode}
\def \@setfloattypecounts {%
\@currtype \count\@currbox
\@fpstype \count\@currbox
\divide\@currtype\@xxxii \multiply\@currtype\@xxxii
\advance \@fpstype -\@currtype
%<*trace>
\tr@ce{(mod 32) fpstype: \the \@fpstype}%
\tr@ce{(mult of 32) currtype: \the \@currtype}%
% Tracing only: but some should be changed into real errors/warnings?
\ifnum \@fpstype<\sixt@@n
\ifnum \@fpstype=\z@
\tr@ce{ERROR: no PLACEMENT, fpstype = \the \@fpstype = 0?}%
\fi
\ifnum \@fpstype=\@ne
\tr@ce{WARNING: only h, fpstype = \the \@fpstype = 1?}%
\fi
\tr@ce{BANG float}%
\else
\ifnum \@fpstype=\sixt@@n
\tr@ce{ERROR: no PLACEMENT, fpstype = \the \@fpstype = 16?}%
\fi
\ifnum \@fpstype=17
\tr@ce{WARNING: only h, fpstype = \the \@fpstype = 17?}%
\fi
\tr@ce{ORD float}%
\fi
%</trace>
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
% \end{macro}
%
% Macros for getting, testing and setting bits of the fps.
%
%
% \begin{macro}{\@getfpsbit}
% \changes{v1.0f}{1993/12/05}{Command added}
% Sets |\@tempcnta| to required bit of |\count\@currbox|.
%
% \begin{macrocode}
%<*2ekernel|autoload>
\def \@getfpsbit {%
\@boxfpsbit \@currbox
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@boxfpsbit}
% \changes{v1.0f}{1993/12/05}{Command added}
% Used above.
% \begin{macrocode}
\def \@boxfpsbit #1#2{%
\@tempcnta \count#1%
\divide \@tempcnta #2\relax
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@testfp}
% \changes{v1.0f}{1993/12/05}{Command added}
% New definition of the float page test.
%
% \changes{v1.1v}{1996/07/26}{remove \cs{global} before \cs{@test...}}
% \begin{macrocode}
\def \@testfp #1{%
\@boxfpsbit #18\relax % Really `#1 8' for human readers!
\ifodd \@tempcnta
\else
\@testtrue
\fi
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@setfpsbit}
% \changes{v1.0f}{1993/12/05}{Command added}
% Sets required bit of |\@tempcnta| (to 1).
%
% \begin{macrocode}
\def \@setfpsbit #1{%
\@tempcntb \@tempcnta
\divide \@tempcntb #1\relax
\ifodd \@tempcntb
\else
\advance \@tempcnta #1\relax
\fi
}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@resethfps}
% \changes{v1.0f}{1993/12/05}{Command added}
% \changes{v1.0h}{1993/12/12}{Warnings added: minimal}
% \changes{v1.0m}{1994/04/24}{Warning changed}
% \changes{v1.0m}{1994/04/24}{Number 2 changed to \cs{tw@}}
% \changes{v1.0o}{1994/05/02}{Code shortened}
% Globally adds t as a possible location for an h or !h only placement:
% this must be done using the count.
%
% Although it will leave |\@fpstype| set to 17 even if it was
% originally 1, this does not matter since it is the last thing in
% |\@addtocurcol|.
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def \@resethfps {%
\let\reserved@a\@empty
\ifnum \@fpstype=\@ne
\def \reserved@a {!}%
\@fpstype 17
\fi
\ifnum \@fpstype=17
\global \advance \count\@currbox \tw@
\@latex@warning@no@line {%
`\reserved@a h' float specifier changed to `\reserved@a ht'}%
%<*trace>
\tr@ce{%
`t' added to `\reserved@a h'- new Count: \the \count\@currbox}%
%</trace>
\fi
}
% \end{macrocode}
% \end{macro}
%
%
% Special stuff for BANG floats.
%
% \begin{macro}{\@flsetnum}
% \changes{v1.0f}{1993/12/05}{Command added}
%
% Ignores any zero float counter value in case BANG.
%
% It uses a local assignment to the normally global counter: a bit
% naughty, perhaps?
%
% These assgnments are safe so long as the counter involved is only
% consulted once (\ie only for the `bang float') with the changed value.
% This is the case within |\@addtocurcol| because it is used only
% once within a call of the output routine (which forms a group).
%
% For |\@addtonextcol| this is achieved by putting a group around its
% code; this is needed because it is called (by |\@startcolumn|) for
% each float which was on the deferlist. Almost identical
% considerations pertain to |\@addtodblcol|. There may be more
% efficient ways to handle this, but the group seems to be the simplest.
%
% \changes{v1.0n}{1994/04/30}{Rogue space removed}
% \begin{macrocode}
\def \@flsetnum #1{%
%<*trace>
\tr@ce{fpstype: \the \@fpstype (flsetnum \string#1)}%
%</trace>
\ifnum \@fpstype<\sixt@@n
\ifnum #1=\z@
%<*trace>
\tr@ce{BANG float resetting \string#1 to 1}%
%</trace>
#1\@ne
\fi
\fi
%<*trace>
\tr@ce{#1 (before) = \the #1}%
%</trace>
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@flsettextmin}
% \changes{v1.0f}{1993/12/05}{Command added}
% This ignores |\textfraction| space restriction in case BANG.
%
% \begin{macrocode}
\def \@flsettextmin {%
%<*trace>
\tr@ce{fpstype: \the \@fpstype (flsettextmin)}%
%</trace>
\ifnum \@fpstype<\sixt@@n
%<*trace>
\tr@ce{BANG ignoring textmin}%
%</trace>
\@textmin \z@
\else
\@textmin \textfraction\@colht
%<*trace>
\tr@ce{ORD textmin = \the \@textmin}%
%</trace>
\fi
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@flcheckspace}
% \changes{v1.0f}{1993/12/05}{Command added}
% This ignores space restriction in case BANG; this is still slightly
% conervative since it does not allow for the fact that, if there is
% no text in the column then |\textfloatsep| is not needed.
% Sets |@tempswa| true if there is room for |\@currbox|.
%
% \begin{macrocode}
\def \@flcheckspace #1#2{%
\advance \@reqcolroom
\ifx #2\@empty \textfloatsep \else \floatsep \fi
%<*trace>
\tr@ce{colroom = \the \@colroom (flcheckspace \string#1 \string#2)}%
\tr@ce{reqcolroom = \the \@reqcolroom
(flcheckspace \string#1 \string#2)}%
%</trace>
\ifdim \@colroom>\@reqcolroom
\ifdim #1>\ht\@currbox
\@tempswatrue
%<*trace>
\tr@ce{Space OK: #1 = \the #1 > \the \ht \@currbox
(flcheckspace \string#1 \string#2)}%
%</trace>
\else
%<*trace>
\tr@ce{fpstype: \the \@fpstype
(flcheckspace \string#1 \string#2)}%
%</trace>
\ifnum \@fpstype<\sixt@@n
%<*trace>
\tr@ce{BANG float ignoring #1
(flcheckspace \string#1 \string#2):}%
\tr@ce{\@spaces #1 = \the #1. Ht float: \the \ht \@currbox
BANG}%
%</trace>
\@tempswatrue
%<*trace>
\else
\tr@ce{Fail---no room (flcheckspace \string#1 \string#2)
(fpstype \the \@fpstype=ORD?):}%
\tr@ce{\@spaces #1 = \the #1. Ht float: \the \ht \@currbox
ORD?}%
%</trace>
\fi
\fi
%<*trace>
\else
\tr@ce{Fail---no room at 2nd test of colroom
(flcheckspace \string#1 \string#2)}%
%</trace>
\fi
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@flupdates}
% \changes{v1.0f}{1993/12/05}{Command added}
% This updates everything when a float is placed.
%
% \begin{macrocode}
%<*2ekernel|autoload>
\def \@flupdates #1#2#3{%
\global \advance #1\m@ne
\global \advance \@colnum \m@ne
\@tempdima -\ht\@currbox
\advance \@tempdima
-\ifx #3\@empty \textfloatsep \else \floatsep \fi
\global \advance #2\@tempdima
\global \advance \@colroom \@tempdima
\@cons #3\@currbox
}
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
%
%
% Interesting facts about float mechanisms past and present, together
% with a summary of various features, some unresolved:
%
% \begin{enumerate}
% \item The value |\textfraction| does not affect the processing
% of doublecol floats: this seems sensible, but should be
% documented.
% \item |\twocolumn| floatplacement was wrong: dbl not needed, ord
% needed.
% \item |\@floatplacement| was not called after |\@startdblcol|
% or |\@topnewpage|. This has been changed; it is clearly a bug
% fix.
% \item The use |\@topnewpage| when |\dblfigrule| is non-trivial
% produced a rule in the wrong place. This has been fixed by not
% using |\dblfigrule| when processing the `float' from
% |\@topnewpage|.
% \item If the specifier was just h and the float could not be put
% here, it went on the deferlist and stayed there until a clearpage.
% It now gets changed to a `th': this is only an error-recovery
% action, putting just h or !h should be deprecated.
% \item |\@dblmaxsep| was `the maximum of |\dblfloatsep| and
% |\dbltexfloatsep|'. But it was never used! Now gone completely,
% like |\@maxsep|.
% \item After an h float is put on a page, it was counted as text when
% applying the |\textfraction| test; this is possibly too big a
% change although it is a bug fix?
% \item Two consecutive h floats are separated by twice |\intextsep|:
% this could be changed to one by use of |\addvspace|, OK?
% Note that it would also mean that less space is put in if an h
% float immediaiely follows other spaces. This is also possibly
% too big a change, at least for compatibility mode?
% Or it may be simply wrong! It has not been changed.
% \item Now |\@addtocurcol| checks first for just p fps. I think
% that this is an increase in efficiency, but maybe the coding
% should be made even more efficient.
% \item |\@tryfcolumn| now tests if the list is empty first, otherwise
% lots of wasted time! Thus this test has been removed from
% |\@startcolumn|.
% As Frank pointed out, this makes |\@startcolumn| less
% efficient. But it is now the same as |\@startdblcolumn|: I can
% see no reason why they should be different, but which is best?
% \item Why is |\@colroom| set in |\@doclearpage|?
% \item Footnotes. Check what |\clearpage| does when footnotes are
% left over. Footnotes are not put on float pages and, also,
% |\@addtonextcol| ignores the existence of held-over footnotes
% in deciding what floats can go on the page. Not changed.
% \item |\clearpage| can still lose non-boxes, at least when floats
% are involved. It also moves some to the `wrong page', but this
% may be a coding problem.
% \item The ! option makes it necessary to check in |\output| that
% there is enough room left on the page after adding a float. (This
% would have been necessary anyway if anyone set |\@textmin| too
% close to zero! A similar danger existed also if the text in a
% |\twocolumn[text]| entity gets too large.)
% The current implementation of this also makes the normal case a
% little less efficient, OK?
% Not enough room means, at present, less than |\baselineskip|,
% with a warning: is this OK? Should it be made generic (another
% parameter)?
% \item There are four possibilities for supporting this:
%
% |\twocolumn[\maketitle more text]|
%
% One is to change
% |\maketitle| slightly to allow this. Another is to change
% |\@topnewpage| so that more than one |\twocolumn[]| command is
% allowed; in this case |\maketitle\twoclumn[more text]| will work.
% The former is more robust from the user's viewpoint, but makes the
% code for |\maketitle| rather ad hoc (maybe it is already?).
% Another is to misuse the global twocolumn flag locally within
% |\@topnewpage|.
% Yet another is to move the column count register from the multicol
% package into the kernel. This has beeen done.
% \item Where should the reinserts be put to maximise the
% probability that footmotes come out on the correct page?
% Or should we go for as much comaptibility as psossible (but see
% next item)?
% \item Should we continue to support (as much as possible)
% |\samepage|? Some of its intended functionality is now advertised
% as being provided by |\enlargethispage|. Use of either is likely
% to result in wrongly placed footnotes, marginals, etc.
% Which should have priority: obeying the pagination instructions,
% or correct placement of notes/marginalia?
% \item Is the adjustment of space to cause shrinking in the
% kludge-* case correct? Should it be limited to 0pt?
% \item Is the setting of |\boxmaxdepth| in makecol and friends
% needed? It only has any effect if |\@textbottom| ends with a box
% or rule, in which case the vskip to allow for its depth should
% also be added. If it is kept, it should probably be the last
% thing in the box. It has now been removed.
%
% It would perhaps be better to document that |\@textbottom|
% and |\@texttop| must have natural height 0pt.
% \item I cannot see why the vskip adjustement for the depth
% is needed if boxmaxdepth is used to ensure that there is never
% a too deep box.
% \item The value of |\boxmaxdepth| should be explicitly set
% whenever necessary: it is too risky to assume that it has any
% particular value. Care is needed in deciding what to set it to.
%
% It is interesting to note that the value of |\boxmaxdepth| is
% unique in being read before the local settings for the box group
% are reset; all other parameter settings which affect the box
% construction use their values outside the box group.
% \item Should |\@maxdepth| store the setting of |\maxdepth| from
% lplain? Or should we provide a proper interface to class files
% for setting these?
% \end{enumerate}
%
% An analysis of various other macros.
%
% |\@opcol| should do |\@floatplacement|, but where? Right at the
% end, since it always occurs at the start of a column.
% \begin{verbatim}
% \def\@opcol{%
% % Why is this done first?
% \global \@mparbottom \z@
% \if@twocolumn
% \@outputdblcol
% \else
% \@outputpage
% % This is not needed since it is done at the end of
% % |\@outputpage|:
% \global \@colht \textheight
% \fi}
% \end{verbatim}
%
% Only tracing has been added to these.
%
% \begin{macrocode}
%<*2ekernel|autoload|fltrace>
\def\@makefcolumn #1{%
\begingroup
\@fpmin \z@
\let \@testfp \@gobble
\@tryfcolumn #1%
\endgroup
%<*trace>
\if@fcolmade
\tr@ce{PAGE: in \string\clearpage \if@twocolumn ---twocolumn\fi---}%
\tr@ce{----- float column/page completed from \string#1}%
\fi
%</trace>
}
% \end{macrocode}
% This will line up the last baselines in the two
% columns provided they are constructed in the normal way: \ie ending
% in a skip of minus the original depth, with |\@textbottom| adding
% nothing.
%
% Thus again it is essential for |\@textbottom| to have depth 0pt.
% \begin{macrocode}
\def\@outputdblcol{%
\if@firstcolumn
\global \@firstcolumnfalse
\global \setbox\@leftcolumn \box\@outputbox
%<*trace>
\tr@ce{PAGE: first column boxed}%
%</trace>
\else
\global \@firstcolumntrue
\setbox\@outputbox \vbox {%
\hb@xt@\textwidth {%
\hb@xt@\columnwidth {%
\box\@leftcolumn \hss}%
\hfil
\vrule \@width\columnseprule
\hfil
\hb@xt@\columnwidth {%
\box\@outputbox \hss}%
}%
}%
%<*trace>
\tr@ce{PAGE: second column also boxed}%
%</trace>
\@combinedblfloats
\@outputpage
%<*trace>
\tr@ce{PAGE: two column page completed}%
%</trace>
\begingroup
\@dblfloatplacement
\@startdblcolumn
% \end{macrocode}
% This loop could be replaced by an |\expandafter| tail
% recursion in\\ |\@startdblcolumn|.
% \begin{macrocode}
\@whilesw\if@fcolmade \fi
{\@outputpage
%<*trace>
\tr@ce{PAGE: double float page completed}%
%</trace>
\@startdblcolumn}%
\endgroup
\fi
}
%</2ekernel|autoload|fltrace>
% \end{macrocode}
%
% \subsubsection{Float placement parameters}
% \changes{v1.0i}{1993/12/14}{Section added to declare all parameters}
%
% The main purpose of this section is to ensure that all the
% float-placement parameters which need to be set in a class file or
% package have been declared. It also describes their use and sets
% values for them which are reasonable for typical douments using
% US letter or A4 sized paper.
%
% \paragraph{Limits for the placement of floating objects}
%
% \begin{macro}{\c@topnumber}
% This counter holds the maximum number of
% floats that can appear at the top of a text page or column.
% \begin{macrocode}
%<*2ekernel|autoload>
\newcount\c@topnumber
\setcounter{topnumber}{2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\topfraction}
% This macro holds the maximum proportion (as a decimal number) of
% a text page or column that can be occupied by floats at the top.
% \begin{macrocode}
\newcommand\topfraction{.7}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@bottomnumber}
% This counter holds the maximum number of
% floats that can appear at the bottom of a text page or column.
% \begin{macrocode}
\newcount\c@bottomnumber
\setcounter{bottomnumber}{1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bottomfraction}
% This macro holds the maximum proportion (as a decimal number) of
% a text page or column that can be occupied by floats at the bottom.
% \begin{macrocode}
\newcommand\bottomfraction{.3}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@totalnumber}
% This counter holds the maximum number of floats that can appear on
% any text page or column.
% \begin{macrocode}
\newcount\c@totalnumber
\setcounter{totalnumber}{3}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textfraction}
% This macro holds the minimum proportion (as a decimal number) of
% a text page or column that must be occupied by text.
% \begin{macrocode}
\newcommand\textfraction{.2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\floatpagefraction}
% This macro holds the minimum proportion (as a decimal number) of
% a page or column that must be occupied by floating objects before a
% `float page' is produced.
% \begin{macrocode}
\newcommand\floatpagefraction{.5}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@dbltopnumber}
% This counter holds the maximum number of double-column floats that
% can appear on the top of a two-column text page.
% \begin{macrocode}
\newcount\c@dbltopnumber
\setcounter{dbltopnumber}{2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\dbltopfraction}
% This macro holds the maximum proportion (as a decimal number) of
% a two-column text page that can be occupied by double-column floats
% at the top.
% \begin{macrocode}
\newcommand\dbltopfraction{.7}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\dblfloatpagefraction}
% This macro holds the minimum proportion (as a decimal number) of
% a page that must be occupied by double-column floating objects
% before a `double-column float page' is produced.
% \begin{macrocode}
\newcommand\dblfloatpagefraction{.5}
% \end{macrocode}
% \end{macro}
%
% \paragraph{Floats on a text page}
%
% \begin{macro}{\floatsep}
% \begin{macro}{\textfloatsep}
% \begin{macro}{\intextsep}
% When a floating object is placed on a page with text, these
% parameters control the seperation between the float and the other
% objects on the page. These parameters are used for both
% one-column mode and single-column floats in two-column mode.
% They are all rubber lengths.
%
% |\floatsep| is the space between adjacent floats that are placed
% at the top or bottom of the text page or column.
%
% |\textfloatsep| is the space between the main text and floats
% at the top or bottom of the page or column.
%
% |\intextsep| is the space between in-text floats and the text.
% \begin{macrocode}
\newskip\floatsep
\newskip\textfloatsep
\newskip\intextsep
\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\dblfloatsep}
% \begin{macro}{\dbltextfloatsep}
% When double-column floats (floating objects that span the whole
% |\textwidth|) are placed at the top of a text page in two-column
% mode, the separation between the float and the text is controlled
% by |\dblfloatsep| and |\dbltextfloatsep|. They are rubber lengths.
%
% |\dblfloatsep| is the space between adjacent double-column floats
% placed at the top of the text page.
%
% |\dbltextfloatsep| is the space between the main text and
% double-column floats at the top of the page.
% \begin{macrocode}
\newskip\dblfloatsep
\newskip\dbltextfloatsep
\setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \paragraph{Floats on their own page or column}
%
% \begin{macro}{\@fptop}
% \begin{macro}{\@fpsep}
% \begin{macro}{\@fpbot}
% When floating objects are placed on a seperate page or column,
% called a `float page', the layout of the page is controlled by
% these parameters, which are rubber lengths.
%
% At the top of the page |\@fptop| is inserted;
% typically this supplies some stretchable whitespace.
% At the bottom of the page |\@fpbot| ais inserted.
% Between adjacent floats |\@fpsep| is inserted.
%
% These parameters are used for all floating objects on a
% `float page' in one-column mode, and for single-column
% floats in two-column mode.
%
% Note that at least one of the two parameters |\@fptop| and
% |\@fpbot| should contain a |plus ...fil| so as to fill the
% remaining empty space.
% \begin{macrocode}
\newskip\@fptop
\newskip\@fpsep
\newskip\@fpbot
\setlength\@fptop{0\p@ \@plus 1fil}
\setlength\@fpsep{8\p@ \@plus 2fil}
\setlength\@fpbot{0\p@ \@plus 1fil}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@dblfptop}
% \begin{macro}{\@dblfpsep}
% \begin{macro}{\@dblfpbot}
% Double-column `float pages' in two-column mode use similar
% parameters.
% \begin{macrocode}
\newskip\@dblfptop
\newskip\@dblfpsep
\newskip\@dblfpbot
\setlength\@dblfptop{0\p@ \@plus 1fil}
\setlength\@dblfpsep{8\p@ \@plus 2fil}
\setlength\@dblfpbot{0\p@ \@plus 1fil}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\topfigrule}
% \begin{macro}{\botfigrule}
% \begin{macro}{\dblfigrule}
% The macros can be used to put in rules between floats and text;
% whatever they insert should be vertical mode material which takes
% up zero space.
% \task{CAR}{Add more rules (for Frank in addtocurcol)}
% \begin{macrocode}
\let\topfigrule=\relax
\let\botfigrule=\relax
\let\dblfigrule=\relax
%</2ekernel|autoload>
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \Finale
\endinput
|
