% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file. 
% 
% For further copyright information, and conditions for modification
% and distribution, see the file legal.txt, and any other copyright
% notices in this file.
% 
% This file is part of the LaTeX2e system.
% ----------------------------------------
%   This system is distributed in the hope that it will be useful,
%   but WITHOUT ANY WARRANTY; without even the implied warranty of
%   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
% 
%   For error reports concerning UNCHANGED versions of this file no
%   more than one year old, see bugs.txt.
% 
%   Please do not request updates from us directly.  Primary
%   distribution is through the CTAN archives.
% 
% 
% IMPORTANT COPYRIGHT NOTICE:
% 
% You are NOT ALLOWED to distribute this file alone.
% 
% You are allowed to distribute this file under the condition that it
% is distributed together with all the files listed in manifest.txt.
% 
% If you receive only some of these files from someone, complain!
% 
% 
% Permission is granted to copy this file to another file with a
% clearly different name and to customize the declarations in that
% copy to serve the needs of your installation, provided that you
% comply with the conditions in the file legal.txt.
% 
% However, NO PERMISSION is granted to produce or to distribute a
% modified version of this file under its original name.
%  
% You are NOT ALLOWED to change this file.
% 
% 
% 
% \fi
%
% \iffalse
%%% From File: ltpar.dtx
%
%<*driver>
% \fi
\ProvidesFile{ltpar.dtx}
             [1995/04/29 v1.1c LaTeX Kernel (paragraphs)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltpar.dtx}
\title{\filename}
\date{\filedate}
 \author{%
  Johannes Braams\and
  David Carlisle\and
  Alan Jeffrey\and
  Leslie Lamport\and
  Frank Mittelbach\and
  Tobias Oetiker \thanks{Tobi did the documentation update}\and
  Chris Rowley\and 
  Rainer Sch\"opf}
\begin{document}
  \maketitle
  \DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \CheckSum{18}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v1.1a}{1994/05/16}{(ASAJ) Split from ltinit.dtx.}
% \changes{v1.1b}{1995/04/29}{(TO) Comments clean-up.}
%
% \section{Paragraphs}
%
% This section of the kernel declares the commands used to set 
% |\par| and |\everypar| when ever their function needs to be 
% changed for a long time.
%
% \StopEventually{}
%
% \subsection{Implementation}
%
%
% There are two situations in which |\par| may be changed:
%
% \begin{itemize}
% \item Long-term changes, in which the new value is to remain in effect
%     until the current environment is left.  The environments that
%     change |\par| in this way are the following:
%     \begin{itemize}
%         \item All list environments (itemize, quote, etc.)
%         \item Environments that turn |\par| into a noop:
%              tabbing, array and tabular.
%     \end{itemize}
%  \item  Temporary changes, in which |\par| is restored to its previous
%  value the next time it is executed. The following are all such uses.
%      \begin{itemize}
%        \item |\end| when preceded by |\@endparenv|, which is called by
%                 |\endtrivlist|
%        \item  The mechanism for avoiding page breaks and getting the
%           spacing right after section heads.
%       \end{itemize}
% \end{itemize}
%
% \DescribeMacro{\@setpar}
% To permit the proper interaction of these two situations, long-term
% changes are made by the |\@setpar{|\meta{VAL}|}| command.
% It's function is:
% \begin{quote}
%    To set |\par|. It |\def|'s |\par| and |\@par| to \meta{VAL}.
% \end{quote}
%
% \DescribeMacro{\@restorepar}
% Short-term changes are made by the usual |\def\par| commands.
% The original values are restored after a short-term change
% by the |\@restorepar| commands.
% 
% \DescribeMacro{\@@par}
% |\@@par| always is defined to be the original \TeX{} |\par|.
%
% \DescribeMacro{\everypar}
% |\everypar| is changed only for the short term.  Whenever |\everypar|
% is set non-null, it should restore itself to null when executed.
%
% The following commands change |\everypar| in this way:
% \begin{itemize}
%    \item |\item|
%    \item |\end| when preceded by |\@endparenv|, which is called by
%                 |endtrivlist|
%    \item |\minipage|
% \end{itemize}
%
% When dealing with |\par| and |\everypar| remember the following two 
% warnings:
% \begin{enumerate}
%  \item Commands that make short-term changes to |\par| and |\everypar|
%     must take account of the possibility that the new commands and the
%     ones that do the restoration may be executed inside a group.  In
%     particular, |\everypar| is executed inside a group whenever a new
%     paragraph  begins with a left brace.  The |\everypar| command
%     that restores its  definition should be local to the current 
%     group (in case the command
%     is inside a minipage used inside someplace where |\everypar| has
%     been redefined).  Thus, if |\everypar| is redefined to do an
%     |\everypar{}| it could take several executions of |\everypar|
%     before the restoration ``holds''.  This usually causes no problem.
%     However, to prevent the extra executions from doing harm, 
%     use a global switch to keep anything harmful in the new 
%     |\everypar| from being done twice.
%   \item Commands that change |\everypar| should remember that
%   |\everypar| might be supposed to set the following switches false:
%      \begin{itemize}
%        \item |@nobreak|
%        \item |@minipage|
%      \end{itemize}
%      they should do the setting if necessary.
%  \end{enumerate}
%    \begin{macrocode}
%<*2ekernel>
\message{par,}
%    \end{macrocode}
%
%
% \begin{macro}{\@setpar}
% \begin{macro}{\@par}
%    Initiate a long-term change to |\par|.
%    \begin{macrocode}
\def\@setpar#1{\def\par{#1}\def\@par{#1}}
%    \end{macrocode}
%
%    The default definition of |\@par| will ensure that if
%    |\@restorepar| defines |\par| to execute |\@par| it will redefine
%    itself to the primitive |\@@par| after one iteration.
%    \begin{macrocode}
\def\@par{\let\par\@@par\par}
%</2ekernel>
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@restorepar}
%    Restore from a short-term change to |\par|.
%    \begin{macrocode}
\def\@restorepar{\def\par{\@par}}
%    \end{macrocode}
% \end{macro}
% 
% \Finale
\endinput