Plan 9 from Bell Labs’s /usr/web/sources/contrib/steve/root/sys/lib/texmf/web2c/texmf.cnf

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


% texmf.cnf -- runtime path configuration file for kpathsea.
% (If you change or delete `original' on the previous line, the
% distribution won't install its version over yours.)
% Public domain.
% 
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
% 
% texmf.cnf is generated from texmf.in, by replacing @var@ with the
% value of the Make variable `var', via a sed file texmf.sed, generated
% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in
% by configure).
% 
% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
% The `=' (and surrounding spaces) is optional.
% No % or @ in texmf.in, for the sake of autogeneration.
% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.)
% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
% 
% Earlier entries (in the same or another file) override later ones, and
% an environment variable foo overrides any texmf.cnf definition of foo.
% 
% All definitions are read before anything is expanded, so you can use
% variables before they are defined. 
% 
% If a variable assignment is qualified with `.PROGRAM', it is ignored
% unless the current executable (last filename component of argv[0]) is
% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
% right-hand side. For environment variables, use FOO_PROGRAM.
% 
% Which file formats use which paths for searches is described in the
% various programs' and the kpathsea documentation.
% 
% // means to search subdirectories (recursively).
% A leading !! means to look only in the ls-R db, never on the disk.
% A leading/trailing/doubled : in the paths will be expanded into the
%   compile-time default. Probably not what you want.
% 
% You can use brace notation, for example: /usr/local/{mytex:othertex}
% expands to /usr/local/mytex:/usr/local/othertex.  Instead of the path
% separator you can use a comma: /usr/local/{mytex,othertex} also expands
% to /usr/local/mytex:/usr/local/othertex.  However, the use of the comma
% instead of the path separator is deprecated.
%
% The text above assumes thet path separator is a colon (:).  Non-UNIX
% systems use different path separators, for example MicroSoft operating
% systems use the semicolon (;).

%  Part 1: Search paths and directories.

% You can set an environment variable to override TEXMF if you're testing
% a new TeX tree, without changing anything else.
% 
% You may wish to use one of the $SELFAUTO... variables here so TeX will
% find where to look dynamically.  See the manual and the definition
% below of TEXMFCNF.

% The main tree, which must be mentioned in $TEXMF, below:
TEXMFMAIN = /sys/lib/texmf

% A place for local additions to a "standard" texmf tree.  For example:
%   TEXMFLOCAL = /sys/lib/texmf.local

% User texmf trees can be catered for like this...
%   HOMETEXMF = $HOME/texmf

% Now, list all the texmf trees. If you have multiple trees,
% use shell brace notation, like this:
%   TEXMF = {$HOMETEXMF:!!$TEXMFLOCAL:!!$TEXMFMAIN}
% The braces are necessary.
TEXMF = !!$TEXMFMAIN

% The system trees.  These are the trees that are shared by all the users.
SYSTEXMF = $TEXMF

% Where generated fonts may be written.  This tree is used when the sources
% were found in a system tree and either that tree wasn't writable, or the
% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
VARTEXFONTS = /sys/lib/texmf/fonts

% Where to look for ls-R files.  There need not be an ls-R in the
% directories in this path, but if there is one, Kpathsea will use it.
TEXMFDBS = $TEXMF

% It may be convenient to define TEXMF like this:
%   TEXMF = {$HOMETEXMF:!!$TEXMFLOCAL:!!$TEXMFMAIN:$HOME}
% which allows users to set up entire texmf trees, and tells TeX to
% look in places like ~/tex and ~/bibtex.  If you do this, define TEXMFDBS
% like this:
%   TEXMFDBS = $HOMETEXMF:$TEXMFLOCAL:$TEXMFMAIN:$VARTEXFONTS
% or mktexlsr will generate an ls-R file for $HOME when called, which is
% rarely desirable.  If you do this you'll want to define SYSTEXMF like
% this:
%   SYSTEXMF = $TEXMFLOCAL:$TEXMFMAIN
% so that fonts from a user's tree won't escape into the global trees.
%
% On some systems, there will be a system tree which contains all the font
% files that may be created as well as the formats.  For example
%   VARTEXMF = /var/lib/texmf
% is used on many Linux systems.  In this case, set VARTEXFONTS like this
%   VARTEXFONTS = $VARTEXMF/fonts
% and do not mention it in TEXMFDBS (but _do_ mention VARTEXMF).


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Usually you will not need to edit any of the other variables in part 1. %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% WEB2C is for Web2C specific files.  The current directory may not be
% a good place to look for them.
WEB2C = $TEXMF/web2c

% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
% or \openin, including .sty, .eps, etc. 

% LaTeX 2e specific macros are stored in latex/, macros that can only be
% used with 2.09 in latex209/.  In addition, we look in the directory
% latex209, useful for macros that were written for 2.09 and do not
% mention 2e at all, but can be used with 2e.
TEXINPUTS.latex209 = .:$TEXMF/tex/{latex209:generic:latex:}//
TEXINPUTS.latex2e = .:$TEXMF/tex/{latex:generic:latex209:}//
TEXINPUTS.latex = .:$TEXMF/tex/{latex:generic:latex209:}//

% Fontinst needs to read afm files.
TEXINPUTS.fontinst = .:$TEXMF/tex//:$TEXMF/fonts//afm//

% Plain TeX.  Have the command tex check all directories as a last
% resort, we may have plain-compatible stuff anywhere.
TEXINPUTS.tex = .:$TEXMF/tex/{plain:generic:}//
% other plain-based formats
TEXINPUTS.amstex = .:$TEXMF/tex/{amstex:plain:generic:}//
TEXINPUTS.ftex = .:$TEXMF/tex/{formate:plain:generic:}//
TEXINPUTS.texinfo = .:$TEXMF/tex/{texinfo:plain:generic:}//
TEXINPUTS.eplain  = .:$TEXMF/tex/{eplain:plain:generic:}//
TEXINPUTS.jadetex = .:$TEXMF/tex/{jadetex:plain:generic:}//

% MLTeX.
TEXINPUTS.frtex   = .:$TEXMF/{mltex:tex}/{french:plain:generic:}//
TEXINPUTS.frlatex = .:$TEXMF/{mltex:tex}/{french:latex:generic:latex209:}//
TEXINPUTS.mltex = .:$TEXMF/{mltex:tex}/{plain:generic:}//
TEXINPUTS.mllatex = .:$TEXMF/{mltex:tex}/{latex:generic:latex209:}//

% e-TeX.  This form of the input paths is borrowed from teTeX.  A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.elatex   = .:$TEXMF/{etex:tex}/{latex:generic:latex209:plain:}//
TEXINPUTS.etex     = .:$TEXMF/{etex:tex}/{plain:generic:}//

% PDFTeX.  This form of the input paths is borrowed from teTeX.  A certain
% variant of TDS is assumed here, unaffected by the build variables.
TEXINPUTS.pdftexinfo = .:$TEXMF/{pdftex:tex}/{texinfo:generic:plain:}//
TEXINPUTS.pdflatex = .:$TEXMF/{pdftex:tex}/{latex:generic:latex209:plain:}//
TEXINPUTS.pdftex   = .:$TEXMF/{pdftex:tex}/{plain:generic:}//

% Omega.
TEXINPUTS.lambda = .:$TEXMF/{omega:tex}/{lambda:latex:generic:latex209:plain:}//
TEXINPUTS.omega = .:$TEXMF/{omega:tex}/{plain:generic:}//

% Earlier entries override later ones, so put this last.
TEXINPUTS = .:$home/lib/tex:$TEXMF/tex/{generic:}//

% Metafont, MetaPost inputs.
MFINPUTS = .:$TEXMF/metafont//:{$TEXMF/fonts}//source//
MPINPUTS = .:$TEXMF/metapost//

% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL),
% and string pools (.pool) for ini{tex,mf,mp}.  It is silly that we have six
% paths and directories here (they all resolve to a single place by default),
% but historically ...
TEXFORMATS = .:$TEXMF/web2c
MFBASES = .:$TEXMF/web2c
MPMEMS = .:$TEXMF/web2c
TEXPOOL = .:$TEXMF/web2c
MFPOOL = .:$TEXMF/web2c
MPPOOL = .:$TEXMF/web2c

% Device-independent font metric files.
VFFONTS = .:$TEXMF/fonts//vf//
TFMFONTS = .:{$TEXMF/fonts}//tfm//

% The $MAKETEX_MODE below means the drivers will not use a cx font when
% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
% The modeless part guarantees that bitmaps for PostScript fonts are found.
PKFONTS = .:{$TEXMF/fonts}//pk/{$MAKETEX_MODE:modeless}//

% Similarly for the GF format, which only remains in existence because
% Metafont outputs it (and MF isn't going to change).
GFFONTS = .:$TEXMF/fonts//gf/$MAKETEX_MODE//

% A backup for PKFONTS and GFFONTS. Not used for anything.
GLYPHFONTS = .:$TEXMF/fonts

% For texfonts.map and included map files used by mktexpk.
% See ftp://ftp.tug.org/tex/fontname.tar.gz.
TEXFONTMAPS = .:$TEXMF/fontname

% BibTeX bibliographies and style files.
BIBINPUTS = .:$TEXMF/bibtex/{bib:}//
BSTINPUTS = .:$TEXMF/bibtex/{bst:}//

% MFT style files.
MFTINPUTS = .:$TEXMF/mft//

% PostScript headers, prologues (.pro), encodings (.enc) and fonts.
TEXPSHEADERS = .:$TEXMF/dvips//:$TEXMF/pdftex//:$TEXMF/fonts//type1//

% PostScript Type 1 outline fonts.
T1FONTS = .:$TEXMF/fonts//type1//

% PostScript AFM metric files.
AFMFONTS = .:$TEXMF/fonts//afm//

% TrueType outline fonts.
TTFONTS = .:$TEXMF/fonts//truetype//

% Type 42 outline fonts.
T42FONTS = .:$TEXMF/fonts//type42//

% Dvips' config.* files (this name should not start with `TEX'!).
TEXCONFIG = .:$TEXMF/dvips//

% Makeindex style (.ist) files.
INDEXSTYLE = .:$TEXMF/makeindex//

% Used by DMP (ditroff-to-mpx), called by makempx -troff.
TRFONTS = /usr/lib/font/devpost
MPSUPPORT = .:$TEXMF/metapost/support

% For xdvi to find mime.types and .mailcap, if they do not exist in
% $HOME.  These are single directories, not paths.
% (But the default mime.types, at least, may well suffice.)
MIMELIBDIR = /sys/lib//etc
MAILCAPLIBDIR = /sys/lib//etc

% TeX documentation and source files, for use with kpsewhich.
TEXDOCS = .:$TEXMF/doc//
TEXSOURCES = .:$TEXMF/source//

% Omega-related fonts and other files.  The odd construction for OFMFONTS
% makes it behave in the face of a definition of TFMFONTS.  Unfortunately
% no default substitution would take place for TFMFONTS, so an explicit
% path is retained.
OFMFONTS = .:{$TEXMF/fonts}//{ofm:tfm}//:$TFMFONTS
OPLFONTS = .:{$TEXMF/fonts}//opl//
OVFFONTS = .:{$TEXMF/fonts}//ovf//
OVPFONTS = .:{$TEXMF/fonts}//ovp//
OTPINPUTS = .:$TEXMF/omega/otp//
OCPINPUTS = .:$TEXMF/omega/ocp//

% Some additional input variables for several programs.  If you add
% a program that uses the 'other text files' or 'other binary files'
% search formats, you'll want to add their variables here as well.
XDVIINPUTS = .:$TEXMF/xdvi
TEX4HTINPUTS = .:$TEXMF/tex4ht//

%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
KPSE_DOT = .

% This definition isn't used from this .cnf file itself (that would be
% paradoxical), but the compile-time default in paths.h is built from it.
% The SELFAUTO* variables are set automatically from the location of
% argv[0], in kpse_set_progname.  
% 
% About the /. construction:
% 1) if the variable is undefined, we'd otherwise have an empty path
%    element in the compile-time path.  This is not meaningful.
% 2) if we used /$VARIABLE, we'd end up with // if VARIABLE is defined,
%    which would search the entire world.
%    
% The TETEXDIR stuff isn't likely to relevant unless you're using teTeX,
% but it doesn't hurt.
% 
TEXMFCNF = .:{$SELFAUTOLOC:$SELFAUTODIR:$SELFAUTOPARENT}{:{/share:}/texmf{.local:}/web2c}:/.$TETEXDIR:/.$TEXMF/web2c:/sys/lib/texmf/web2c



%  Part 2: Non-path options.
 
% Write .log/.dvi/etc. files here, if the current directory is unwritable.
% TEXMFOUTPUT = /tmp

% If a dynamic file creation fails, log the command to this file, in
% either the current directory or TEXMFOUTPUT.  Set to the
% empty string or  0  to avoid logging.
MISSFONT_LOG = missfont.log

% Set to a colon-separated list of words specifying warnings to suppress.
% To suppress everything, use TEX_HUSH = all; this is equivalent to
% TEX_HUSH = checksum:lostchar:readable:special
TEX_HUSH = none

% Enable system commands via \write18{...}?
shell_escape = f

% Allow TeX \openout on filenames starting with `.' (e.g., .rhosts)?
% a (any)        : any file can be opened.
% r (restricted) : disallow opening "dotfiles".
% p (paranoid)   : as 'r' and disallow going to parent directories, and
%                  restrict absolute paths to be under $TEXMFOUTPUT.
openout_any = p

% Enable the mktex... scripts by default?  These must be set to 0 or 1.
% Particular programs can and do override these settings, for example
% dvips's -M option.  Your first chance to specify whether the scripts
% are invoked by default is at configure time.
% 
% These values are ignored if the script names are changed; e.g., if you
% set DVIPSMAKEPK to `foo', what counts is the value of the environment
% variable/config value `FOO', not the `MKTEXPK' value.
% 
MKTEXTEX = 0
MKTEXPK = 1
MKTEXMF = 1
MKTEXTFM = 1
MKOCP = 0
MKOFM = 0

% What MetaPost runs to make MPX files.  This is passed an option -troff
% if MP is in troff mode.  Set to `0' to disable this feature.
MPXCOMMAND = makempx


%  Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
% 
% If you want to change some of these sizes only for a certain TeX
% variant, the usual dot notation works, e.g.,
% main_memory.hugetex = 20000000
% 
% If a change here appears to be ignored, try redumping the format file.

% Memory. Must be less than 8,000,000 total.
% 
% main_memory is relevant only to initex, extra_mem_* only to non-ini.
% Thus, have to redump the .fmt file after changing main_memory; to add
% to existing fmt files, increase extra_mem_*.  (To get an idea of how
% much, try \tracingstats=2 in your TeX source file;
% web2c/tests/memtest.tex might also be interesting.)
% 
% To increase space for boxes (as might be needed by, e.g., PiCTeX),
% increase extra_mem_bot.
% 
% For some xy-pic samples, you may need as much as 700000 words of memory.
% For the vast majority of documents, 60000 or less will do.
% 
main_memory = 700000 % words of inimemory available; also applies to inimf&mp
extra_mem_top = 0    % extra high memory for chars, tokens, etc.
extra_mem_bot = 0    % extra low memory for boxes, glue, breakpoints, etc.

% Words of font info for TeX (total size of all TFM files, approximately). 
font_mem_size = 200000

% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
font_max = 1000

% Extra space for the hash table of control sequences (which allows 10K
% names as distributed).
hash_extra = 0

% Max number of characters in all strings, including all error messages,
% help texts, font names, control sequences.  These values apply to TeX and MP.
pool_size = 125000		
% Minimum pool space after TeX/MP's own strings; must be at least
% 25000 less than pool_size, but doesn't need to be nearly that large.
string_vacancies = 25000
max_strings = 15000		% max number of strings
pool_free = 5000		% min pool space left after loading .fmt

% Hyphenation trie. As distributed, the maximum is 65535; this should
% work unless `unsigned short' is not supported or is smaller than 16
% bits.  This value should suffice for UK English, US English, French,
% and German (for example).  To increase, you must change
% `ssup_trie_opcode' and `ssup_trie_size' in tex.ch (and rebuild TeX);
% the trie will then consume four bytes per entry, instead of two.
% 
% US English, German, and Portuguese: 30000.
% German: 14000.
% US English: 10000.
% 
trie_size = 64000

% Buffer size.  TeX uses the buffer to contain input lines, but macro
% expansion works by writing material into the buffer and reparsing the
% line.  As a consequence, certain constructs require the buffer to be
% very large.  As distributed, the size is 50000; most documents can be
% handled within a tenth of this size.
buf_size = 50000

hyph_size = 1000        % number of hyphenation exceptions, >610 and <32767.
nest_size = 100		% simultaneous semantic levels (e.g., groups)
max_in_open = 15	% simultaneous input files and error insertions
param_size = 500	% simultaneous macro parameters
save_size = 4000	% for saving values outside current group
stack_size = 300	% simultaneous input sources

% These are Omega-specific.
ocp_buf_size = 20000	% character buffers for ocp filters.
ocp_stack_size = 10000	% stacks for ocp computations.
ocp_list_size = 1000	% control for multiple ocps.

% These work best if they are the same as the I/O buffer size, but it
% doesn't matter much.  Must be a multiple of 8.
dvi_buf_size = 16384 % TeX
gf_buf_size = 16384  % MF

% It's probably inadvisable to change these. At any rate, we must have:
% 45 < error_line      < 255;
% 30 < half_error_line < error_line - 15;
% 60 <= max_print_line;
% These apply to Metafont and MetaPost as well.
error_line = 79
half_error_line = 50
max_print_line = 79

Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.