Plan 9 from Bell Labs’s /usr/web/sources/contrib/steve/root/sys/src/cmd/tex/web2c/INSTALL

Copyright © 2021 Plan 9 Foundation.
Distributed under the MIT License.
Download the Plan 9 distribution.


Contents:

Installation
  `configure' options
  Compile-time options
  Additional targets
  Trip, trap, and mptrap: Torture tests
  Runtime options


Installation
************

  Installing Web2c is mostly the same as installing any other
Kpathsea-using program.  Therefore, for the basic steps involved, *note
Installation: (kpathsea)Installation..  (A copy is in the file
`kpathsea/INSTALL'.)

  One peculiarity to Web2c is that the source distribution comes in two
files: `web.tar.gz' and `web2c.tar.gz'.  You must retrieve and unpack
them both.  (We have two because the former archive contains the very
large and seldom-changing original WEB source files.)  *Note
unixtex.ftp: (kpathsea)unixtex.ftp.

  Another peculiarity is the MetaPost program.  Although it has been
installed previously as `mp', as of Web2c 7.0 the installed name is now
`mpost', to avoid conflict with the `mp' program that does
prettyprinting.  This approach was recommended by the MetaPost author,
John Hobby.  If you as the TeX administrator wish to make it available
under its shorter name as well, you will have to set up a link or some
such yourself.  And of course individual users can do the same.

  For solutions to common installation problems and information on how
to report a bug, see the file `kpathsea/BUGS' (*note Bugs:
(kpathsea)Bugs.).  See also the Web2c home page,
`http://www.tug.org/web2c'.

  Points worth repeating:

   * Before starting the standard compilation and installation you must
     install the basic fonts, macros, and other library files.  *Note
     Installation: (kpathsea)Installation.

   * If you do not wish to use the standard file locations, see *Note
     Changing search paths: (kpathsea)Changing search paths.

   * Some Web2c features are enabled or disabled at `configure' time,
     as described in the first section below.

`configure' options
===================

  This section gives pointers to descriptions of the `--with' and
`--enable' `configure' arguments that Web2c accepts.  Some are specific
to Web2c, others are generic to all Kpathsea-using programs.

  For a list of all the options `configure' accepts, run `configure
--help'.  The generic options are listed first, and the
package-specific options come last.

  For a description of the generic options (which mainly allow you to
specify installation directories) and basic `configure' usage, *note
Running `configure' scripts: (autoconf)Invoking configure. (a copy is
in the file `kpathsea/CONFIGURE').

`--disable-dump-share'
     Do not make fmt/base/mem files sharable across different endian
     architectures.  *Note Hardware and memory dumps::.

`--without-maketexmf-default'
`--without-maketexpk-default'
`--without-maketextfm-default'
`--with-maketextex-default'
     Enable or disable the dynamic generation programs.  *Note MakeTeX
     configuration: (kpathsea)MakeTeX configuration.  The defaults are
     the inverse of the options, i.e., everything is enabled except
     `MakeTeXTeX'.

`--enable-auto-core'
     Dump `core' if the input file is
     `HackyInputFileNameForCoreDump.tex'.  *Note Preloaded
     executables::.

`--enable-shared'
     Build Kpathsea as a shared library.  *Note Shared library:
     (kpathsea)Shared library.

`--with-editor=CMD'
     Change the default editor invoked by the `e' interactive command.
     *Note Editor invocation::.

`--with-hp2627win'
`--with-mftalkwin'
`--with-nextwin'
`--with-regiswin'
`--with-suntoolswin'
`--with-tektronixwin'
`--with-unitermwin'
`--with-x'
`--with-x-toolkit=KIT'
`--with-x11win'
`--with-x11'
     Define Metafont graphics support; by default, no graphics support
     is enabled.  *Note Online Metafont graphics::.

`--x-includes=DIR'
`--x-libraries=DIR'
     Define the locations of the X11 include files and libraries; by
     default, `configure' does its best to guess).  *Note Optional
     Features: (autoconf)Optional Features.  A copy is in
     `kpathsea/CONFIGURE'.

Compile-time options
====================

  In addition to the `configure' options listed in the previous
section, there are a few things that can be affected at compile-time
with C definitions, rather than with `configure'.  Using any of these
is unusual.

  To specify extra compiler flags (`-DNAME' in this case), the simplest
thing to do is:
     make XCFLAGS="CCOPTIONS"
   You can also set the `CFLAGS' environment variable before running
`configure'.  *Note configure environment: (kpathsea)configure
environment.

Anyway, here are the possibilities:

`-DFIXPT'
`-DNO_MF_ASM'
     Use the original WEB fixed-point routines for Metafont and MetaPost
     arithmetic calculations regarding fractions.  By default,
     assembly-language routines are used on x86 hardware with GNU C
     (unless `NO_MF_ASM' is defined), and floating-point routines are
     used otherwise.

`-DIPC_DEBUG'
     Report on various interprocess communication activities.  *Note
     IPC and TeX: IPC and TeX.

Additional targets
==================

  Web2c has several Make targets besides the standard ones.  You can
invoke these either in the top level directory of the source
distribution (the one containing `kpathsea/' and `web2c/'), or in the
`web2c/' directory.

`c-sources'
     Make only the C files, translated from the Web sources, presumably
     because you want to take them to a non-Unix machine.

`formats'
`install-formats'
     Make or install all the memory dumps (*note Memory dumps::.).  By
     default, the standard plain formats plus `latex.fmt' are made.  You
     can add other formats by redefining the `fmts', `bases', and
     `mems' variables.  See the top of `web2c/Makefile' for the
     possibilities.

`fmts'
`install-fmts'
     Make or install the TeX `.fmt' files. *Note initex invocation::.

`bases'
`install-bases'
     Make or install the Metafont `.base' files.  *Note inimf
     invocation::.

`mems'
`install-mems'
     Make or install the MetaPost `.mem' files.  *Note inimpost
     invocation::.

`triptrap'
`trip'
`trap'
`mptrap'
     To run the torture tests for TeX, Metafont, and MetaPost
     (respectively).  See the next section.

Trip, trap, and mptrap: Torture tests
=====================================

  To validate your TeX, Metafont, and MetaPost executables, run `make
triptrap'.  This runs the trip, trap, and mptrap "torture tests".  See
the files `triptrap/tripman.tex', `triptrap/trapman.tex', and
`triptrap/mptrap.readme' for detailed information and background on the
tests.

  The differences between your executables' behavior and the standard
values will show up on your terminal.  The usual differences (these are
all acceptable) are:

   * string usage and table sizes;

   * glue set ratios;

   * `down4', `right4', and `y4' commands in DVItype output;

   * dates and times.

Any other differences are trouble. The most common culprit in the past
has been compiler bugs, especially when optimizing.  *Note TeX or
Metafont failing: (kpathsea)TeX or Metafont failing.

  The files `trip.diffs', `mftrap.diffs', and `mptrap.diffs' in the
`triptrap' directory show the standard diffs against the original
output.  If you diff your diffs against these files, you should come up
clean.  For example
     make trip >&mytrip.diffs
     diff triptrap/trip.diffs mytrip.diffs

  To run the tests separately, use the targets `trip', `trap', and
`mptrap'.

  To run simple tests for all the programs as well as the torture tests,
run `make check'.  You can compare the output to the distributed file
`tests/check.log' if you like.

Runtime options
===============

  Besides the configure- and compile-time options described in the
previous sections, you can control a number of parameters (in
particular, array sizes) in the `texmf.cnf' runtime file read by
Kpathsea (*note Config files: (kpathsea)Config files.).

  Rather than exhaustively listing them here, please see the last
section of the distributed `kpathsea/texmf.cnf'.  Some of the more
interesting values:

`main_memory'
     Total words of memory available, for TeX, Metafont, and MetaPost.
     Must remake the format file after changing.

`extra_mem_bot'
     Extra space for "large" TeX data structures: boxes, glue,
     breakpoints, et al.  If you use PiCTeX, you may well want to set
     this.

`font_mem_size'
     Words of font info available for TeX; this is approximately the
     total size of all TFM files read.

`hash_extra'
     Additional space for the hash table of control sequence names.
     Approximately 10,000 control sequences can be stored in the main
     hash table; if you have a large book with numerous
     cross-references, this might not be enough, and thus you will want
     to set `hash_extra'.

  Of course, ideally all arrays would be dynamically expanded as
necessary, so the only limiting factor would be the amount of swap space
available.  Unfortunately, implementing this is extremely difficult, as
the fixed size of arrays is assumed in many places throughout the source
code.  These runtime limits are a practical compromise between the
compile-time limits in previous versions, and truly dynamic arrays.  (On
the other hand, the Web2c BibTeX implementation does do dynamic
reallocation of some arrays.)


Bell Labs OSI certified Powered by Plan 9

(Return to Plan 9 Home Page)

Copyright © 2021 Plan 9 Foundation. All Rights Reserved.
Comments to webmaster@9p.io.