/*
* This part takes care of locking except for initialization and
* other threads created by the hw dep. drivers.
*/
#include <u.h>
#include <libc.h>
#include <ctype.h>
#include <thread.h>
#include "usb.h"
#include "usbfs.h"
#include "serial.h"
#include "prolific.h"
#include "ucons.h"
#include "ftdi.h"
#include "silabs.h"
int serialdebug;
enum {
/* Qids. Maintain order (relative to dirtabs structs) */
Qroot = 0,
Qctl,
Qdata,
Qmax,
};
typedef struct Dirtab Dirtab;
struct Dirtab {
char *name;
int mode;
};
static Dirtab dirtab[] = {
[Qroot] "/", DMDIR|0555,
[Qdata] "%s", 0660,
[Qctl] "%sctl", 0664,
};
static int sdebug;
static void
serialfatal(Serial *ser)
{
Serialport *p;
int i;
dsprint(2, "serial: fatal error, detaching\n");
devctl(ser->dev, "detach");
for(i = 0; i < ser->nifcs; i++){
p = &ser->p[i];
usbfsdel(&p->fs);
if(p->w4data != nil)
chanclose(p->w4data);
if(p->gotdata != nil)
chanclose(p->gotdata);
if(p->readc)
chanclose(p->readc);
}
}
/* I sleep with the lock... only way to drain in general */
static void
serialdrain(Serialport *p)
{
Serial *ser;
uint baud, pipesize;
ser = p->s;
baud = p->baud;
if(p->baud == ~0)
return;
if(ser->maxwtrans < 256)
pipesize = 256;
else
pipesize = ser->maxwtrans;
/* wait for the at least 256-byte pipe to clear */
sleep(10 + pipesize/((1 + baud)*1000));
if(ser->clearpipes != nil)
ser->clearpipes(p);
}
int
serialreset(Serial *ser)
{
Serialport *p;
int i, res;
res = 0;
/* cmd for reset */
for(i = 0; i < ser->nifcs; i++){
p = &ser->p[i];
serialdrain(p);
}
if(ser->reset != nil)
res = ser->reset(ser, nil);
return res;
}
/* call this if something goes wrong, must be qlocked */
int
serialrecover(Serial *ser, Serialport *p, Dev *ep, char *err)
{
if(p != nil)
dprint(2, "serial[%d], %s: %s, level %d\n", p->interfc,
p->name, err, ser->recover);
else
dprint(2, "serial[%s], global error, level %d\n",
ser->p[0].name, ser->recover);
ser->recover++;
if(strstr(err, "detached") != nil)
return -1;
if(ser->recover < 3){
if(p != nil){
if(ep != nil){
if(ep == p->epintr)
unstall(ser->dev, p->epintr, Ein);
if(ep == p->epin)
unstall(ser->dev, p->epin, Ein);
if(ep == p->epout)
unstall(ser->dev, p->epout, Eout);
return 0;
}
if(p->epintr != nil)
unstall(ser->dev, p->epintr, Ein);
if(p->epin != nil)
unstall(ser->dev, p->epin, Ein);
if(p->epout != nil)
unstall(ser->dev, p->epout, Eout);
}
return 0;
}
if(ser->recover > 4 && ser->recover < 8)
serialfatal(ser);
if(ser->recover > 8){
ser->reset(ser, p);
return 0;
}
if(serialreset(ser) < 0)
return -1;
return 0;
}
static int
serialctl(Serialport *p, char *cmd)
{
Serial *ser;
int c, i, n, nf, nop, nw, par, drain, set, lines;
char *f[16];
uchar x;
ser = p->s;
drain = set = lines = 0;
nf = tokenize(cmd, f, nelem(f));
for(i = 0; i < nf; i++){
if(strncmp(f[i], "break", 5) == 0){
if(ser->setbreak != nil)
ser->setbreak(p, 1);
continue;
}
nop = 0;
n = atoi(f[i]+1);
c = *f[i];
if (isascii(c) && isupper(c))
c = tolower(c);
switch(c){
case 'b':
drain++;
p->baud = n;
set++;
break;
case 'c':
p->dcd = n;
// lines++;
++nop;
break;
case 'd':
p->dtr = n;
lines++;
break;
case 'e':
p->dsr = n;
// lines++;
++nop;
break;
case 'f': /* flush the pipes */
drain++;
break;
case 'h': /* hangup?? */
p->rts = p->dtr = 0;
lines++;
fprint(2, "serial: %c, unsure ctl\n", c);
break;
case 'i':
++nop;
break;
case 'k':
drain++;
ser->setbreak(p, 1);
sleep(n);
ser->setbreak(p, 0);
break;
case 'l':
drain++;
p->bits = n;
set++;
break;
case 'm':
drain++;
if(ser->modemctl != nil)
ser->modemctl(p, n);
if(n == 0)
p->cts = 0;
break;
case 'n':
p->blocked = n;
++nop;
break;
case 'p': /* extended... */
if(strlen(f[i]) != 2)
return -1;
drain++;
par = f[i][1];
if(par == 'n')
p->parity = 0;
else if(par == 'o')
p->parity = 1;
else if(par == 'e')
p->parity = 2;
else if(par == 'm') /* mark parity */
p->parity = 3;
else if(par == 's') /* space parity */
p->parity = 4;
else
return -1;
set++;
break;
case 'q':
// drain++;
p->limit = n;
++nop;
break;
case 'r':
drain++;
p->rts = n;
lines++;
break;
case 's':
drain++;
p->stop = n;
set++;
break;
case 'w':
/* ?? how do I put this */
p->timer = n * 100000LL;
++nop;
break;
case 'x':
if(n == 0)
x = CTLS;
else
x = CTLQ;
if(ser->wait4write != nil)
nw = ser->wait4write(p, &x, 1);
else
nw = write(p->epout->dfd, &x, 1);
if(nw != 1){
serialrecover(ser, p, p->epout, "");
return -1;
}
break;
}
/*
* don't print. the condition is harmless and the print
* splatters all over the display.
*/
USED(nop);
if (0 && nop)
fprint(2, "serial: %c, unsupported nop ctl\n", c);
}
if(drain)
serialdrain(p);
if(lines && !set){
if(ser->sendlines != nil && ser->sendlines(p) < 0)
return -1;
} else if(set){
if(ser->setparam != nil && ser->setparam(p) < 0)
return -1;
}
ser->recover = 0;
return 0;
}
char *pformat = "noems";
char *
serdumpst(Serialport *p, char *buf, int bufsz)
{
char *e, *s;
Serial *ser;
ser = p->s;
e = buf + bufsz;
s = seprint(buf, e, "b%d ", p->baud);
s = seprint(s, e, "c%d ", p->dcd); /* unimplemented */
s = seprint(s, e, "d%d ", p->dtr);
s = seprint(s, e, "e%d ", p->dsr); /* unimplemented */
s = seprint(s, e, "l%d ", p->bits);
s = seprint(s, e, "m%d ", p->mctl);
if(p->parity >= 0 || p->parity < strlen(pformat))
s = seprint(s, e, "p%c ", pformat[p->parity]);
else
s = seprint(s, e, "p%c ", '?');
s = seprint(s, e, "r%d ", p->rts);
s = seprint(s, e, "s%d ", p->stop);
s = seprint(s, e, "i%d ", p->fifo);
s = seprint(s, e, "\ndev(%d) ", 0);
s = seprint(s, e, "type(%d) ", ser->type);
s = seprint(s, e, "framing(%d) ", p->nframeerr);
s = seprint(s, e, "overruns(%d) ", p->novererr);
s = seprint(s, e, "berr(%d) ", p->nbreakerr);
s = seprint(s, e, " serr(%d)\n", p->nparityerr);
return s;
}
static int
serinit(Serialport *p)
{
int res;
res = 0;
Serial *ser;
ser = p->s;
if(ser->init != nil)
res = ser->init(p);
if(ser->getparam != nil)
ser->getparam(p);
p->nframeerr = p->nparityerr = p->nbreakerr = p->novererr = 0;
return res;
}
static int
dwalk(Usbfs *fs, Fid *fid, char *name)
{
int i;
char *dname;
Qid qid;
Serialport *p;
qid = fid->qid;
if((qid.type & QTDIR) == 0){
werrstr("walk in non-directory");
return -1;
}
if(strcmp(name, "..") == 0){
/* must be /eiaU%d; i.e. our root dir. */
fid->qid.path = Qroot | fs->qid;
fid->qid.vers = 0;
fid->qid.type = QTDIR;
return 0;
}
p = fs->aux;
for(i = 1; i < nelem(dirtab); i++){
dname = smprint(dirtab[i].name, p->name);
if(strcmp(name, dname) == 0){
qid.path = i | fs->qid;
qid.vers = 0;
qid.type = dirtab[i].mode >> 24;
fid->qid = qid;
free(dname);
return 0;
} else
free(dname);
}
werrstr(Enotfound);
return -1;
}
static void
dostat(Usbfs *fs, int path, Dir *d)
{
Dirtab *t;
Serialport *p;
t = &dirtab[path];
d->qid.path = path;
d->qid.type = t->mode >> 24;
d->mode = t->mode;
p = fs->aux;
if(strcmp(t->name, "/") == 0)
d->name = t->name;
else
snprint(d->name, Namesz, t->name, p->fs.name);
d->length = 0;
}
static int
dstat(Usbfs *fs, Qid qid, Dir *d)
{
int path;
path = qid.path & ~fs->qid;
dostat(fs, path, d);
d->qid.path |= fs->qid;
return 0;
}
static int
dopen(Usbfs *fs, Fid *fid, int)
{
ulong path;
Serialport *p;
path = fid->qid.path & ~fs->qid;
p = fs->aux;
switch(path){ /* BUG: unneeded? */
case Qdata:
dsprint(2, "serial, opened data\n");
break;
case Qctl:
dsprint(2, "serial, opened ctl\n");
if(p->isjtag)
return 0;
serialctl(p, "l8 i1"); /* default line parameters */
break;
}
return 0;
}
static void
filldir(Usbfs *fs, Dir *d, Dirtab *tab, int i, void *v)
{
Serialport *p;
p = v;
d->qid.path = i | fs->qid;
d->mode = tab->mode;
if((d->mode & DMDIR) != 0)
d->qid.type = QTDIR;
else
d->qid.type = QTFILE;
sprint(d->name, tab->name, p->name); /* hope it fits */
}
static int
dirgen(Usbfs *fs, Qid, int i, Dir *d, void *p)
{
i++; /* skip root */
if(i >= nelem(dirtab))
return -1;
filldir(fs, d, &dirtab[i], i, p);
return 0;
}
enum {
Serbufsize = 255,
};
static long
dread(Usbfs *fs, Fid *fid, void *data, long count, vlong offset)
{
int dfd;
long rcount;
ulong path;
char *e, *buf, *err; /* change */
Qid q;
Serialport *p;
Serial *ser;
static int errrun, good;
q = fid->qid;
path = fid->qid.path & ~fs->qid;
p = fs->aux;
ser = p->s;
buf = emallocz(Serbufsize, 1);
err = emallocz(Serbufsize, 1);
qlock(ser);
switch(path){
case Qroot:
count = usbdirread(fs, q, data, count, offset, dirgen, p);
break;
case Qdata:
if(count > ser->maxread)
count = ser->maxread;
dsprint(2, "serial: reading from data\n");
do {
err[0] = 0;
dfd = p->epin->dfd;
if(usbdebug >= 3)
dsprint(2, "serial: reading: %ld\n", count);
assert(count > 0);
if(ser->wait4data != nil)
rcount = ser->wait4data(p, data, count);
else{
qunlock(ser);
rcount = read(dfd, data, count);
qlock(ser);
}
/*
* if we encounter a long run of continuous read
* errors, do something drastic so that our caller
* doesn't just spin its wheels forever.
*/
if(rcount < 0) {
snprint(err, Serbufsize, "%r");
++errrun;
sleep(20);
if (good > 0 && errrun > 10000) {
/* the line has been dropped; give up */
qunlock(ser);
fprint(2, "%s: line %s is gone: %r\n",
argv0, p->fs.name);
threadexitsall("serial line gone");
}
} else {
errrun = 0;
good++;
}
if(usbdebug >= 3)
dsprint(2, "serial: read: %s %ld\n", err, rcount);
} while(rcount < 0 && strstr(err, "timed out") != nil);
dsprint(2, "serial: read from bulk %ld, %10.10s\n", rcount, err);
if(rcount < 0){
dsprint(2, "serial: need to recover, data read %ld %r\n",
count);
serialrecover(ser, p, p->epin, err);
}
dsprint(2, "serial: read from bulk %ld\n", rcount);
count = rcount;
break;
case Qctl:
if(offset != 0 || p->isjtag)
count = 0;
else {
e = serdumpst(p, buf, Serbufsize);
count = usbreadbuf(data, count, 0, buf, e - buf);
}
break;
}
if(count >= 0)
ser->recover = 0;
qunlock(ser);
free(err);
free(buf);
return count;
}
static long
altwrite(Serialport *p, uchar *buf, long count)
{
int nw, dfd;
char err[128];
Serial *ser;
ser = p->s;
do{
dsprint(2, "serial: write to bulk %ld\n", count);
if(ser->wait4write != nil)
/* unlocked inside later */
nw = ser->wait4write(p, buf, count);
else{
dfd = p->epout->dfd;
qunlock(ser);
nw = write(dfd, buf, count);
qlock(ser);
}
rerrstr(err, sizeof err);
dsprint(2, "serial: written %s %d\n", err, nw);
} while(nw < 0 && strstr(err, "timed out") != nil);
if(nw != count){
dsprint(2, "serial: need to recover, status in write %d %r\n",
nw);
snprint(err, sizeof err, "%r");
serialrecover(p->s, p, p->epout, err);
}
return nw;
}
static long
dwrite(Usbfs *fs, Fid *fid, void *buf, long count, vlong)
{
ulong path;
char *cmd;
Serialport *p;
Serial *ser;
p = fs->aux;
ser = p->s;
path = fid->qid.path & ~fs->qid;
qlock(ser);
switch(path){
case Qdata:
count = altwrite(p, (uchar *)buf, count);
break;
case Qctl:
if(p->isjtag)
break;
cmd = emallocz(count+1, 1);
memmove(cmd, buf, count);
cmd[count] = 0;
if(serialctl(p, cmd) < 0){
qunlock(ser);
werrstr(Ebadctl);
free(cmd);
return -1;
}
free(cmd);
break;
default:
qunlock(ser);
werrstr(Eperm);
return -1;
}
if(count >= 0)
ser->recover = 0;
else
serialrecover(ser, p, p->epout, "writing");
qunlock(ser);
return count;
}
static int
openeps(Serialport *p, int epin, int epout, int epintr)
{
Serial *ser;
ser = p->s;
p->epin = openep(ser->dev, epin);
if(p->epin == nil){
fprint(2, "serial: openep %d: %r\n", epin);
return -1;
}
if(epout == epin){
incref(p->epin);
p->epout = p->epin;
}else
p->epout = openep(ser->dev, epout);
if(p->epout == nil){
fprint(2, "serial: openep %d: %r\n", epout);
closedev(p->epin);
return -1;
}
if(!p->isjtag){
devctl(p->epin, "timeout 1000");
devctl(p->epout, "timeout 1000");
}
if(ser->hasepintr){
p->epintr = openep(ser->dev, epintr);
if(p->epintr == nil){
fprint(2, "serial: openep %d: %r\n", epintr);
closedev(p->epin);
closedev(p->epout);
return -1;
}
opendevdata(p->epintr, OREAD);
devctl(p->epintr, "timeout 1000");
}
if(ser->seteps!= nil)
ser->seteps(p);
if(p->epin == p->epout)
opendevdata(p->epin, ORDWR);
else{
opendevdata(p->epin, OREAD);
opendevdata(p->epout, OWRITE);
}
if(p->epin->dfd < 0 ||p->epout->dfd < 0 ||
(ser->hasepintr && p->epintr->dfd < 0)){
fprint(2, "serial: open i/o ep data: %r\n");
closedev(p->epin);
closedev(p->epout);
if(ser->hasepintr)
closedev(p->epintr);
return -1;
}
return 0;
}
static int
findendpoints(Serial *ser, int ifc)
{
int i, epin, epout, epintr;
Ep *ep, **eps;
epintr = epin = epout = -1;
/*
* interfc 0 means start from the start which is equiv to
* iterate through endpoints probably, could be done better
*/
eps = ser->dev->usb->conf[0]->iface[ifc]->ep;
for(i = 0; i < Niface; i++){
if((ep = eps[i]) == nil)
continue;
if(ser->hasepintr && ep->type == Eintr &&
ep->dir == Ein && epintr == -1)
epintr = ep->id;
if(ep->type == Ebulk){
if((ep->dir == Ein || ep->dir == Eboth) && epin == -1)
epin = ep->id;
if((ep->dir == Ein || ep->dir == Eboth) && epout == -1)
epout = ep->id;
}
}
dprint(2, "serial[%d]: ep ids: in %d out %d intr %d\n", ifc, epin, epout, epintr);
if(epin == -1 || epout == -1 || (ser->hasepintr && epintr == -1))
return -1;
if(openeps(&ser->p[ifc], epin, epout, epintr) < 0)
return -1;
dprint(2, "serial: ep in %s out %s\n", ser->p[ifc].epin->dir, ser->p[ifc].epout->dir);
if(ser->hasepintr)
dprint(2, "serial: ep intr %s\n", ser->p[ifc].epintr->dir);
if(usbdebug > 1 || serialdebug > 2){
devctl(ser->p[ifc].epin, "debug 1");
devctl(ser->p[ifc].epout, "debug 1");
if(ser->hasepintr)
devctl(ser->p[ifc].epintr, "debug 1");
devctl(ser->dev, "debug 1");
}
return 0;
}
/* keep in sync with main.c */
static int
usage(void)
{
werrstr("usage: usb/serial [-dD] [-m mtpt] [-s srv]");
return -1;
}
static void
serdevfree(void *a)
{
Serial *ser = a;
Serialport *p;
int i;
if(ser == nil)
return;
for(i = 0; i < ser->nifcs; i++){
p = &ser->p[i];
if(ser->hasepintr)
closedev(p->epintr);
closedev(p->epin);
closedev(p->epout);
p->epintr = p->epin = p->epout = nil;
if(p->w4data != nil)
chanfree(p->w4data);
if(p->gotdata != nil)
chanfree(p->gotdata);
if(p->readc)
chanfree(p->readc);
}
free(ser);
}
static Usbfs serialfs = {
.walk = dwalk,
.open = dopen,
.read = dread,
.write= dwrite,
.stat = dstat,
};
static void
serialfsend(Usbfs *fs)
{
Serialport *p;
p = fs->aux;
if(p->w4data != nil)
chanclose(p->w4data);
if(p->gotdata != nil)
chanclose(p->gotdata);
if(p->readc)
chanclose(p->readc);
}
int
serialmain(Dev *dev, int argc, char* argv[])
{
Serial *ser;
Serialport *p;
char buf[50];
int i, devid;
devid = dev->id;
ARGBEGIN{
case 'd':
serialdebug++;
break;
case 'N':
devid = atoi(EARGF(usage()));
break;
default:
return usage();
}ARGEND
if(argc != 0)
return usage();
ser = dev->aux = emallocz(sizeof(Serial), 1);
ser->maxrtrans = ser->maxwtrans = sizeof ser->p[0].data;
ser->maxread = ser->maxwrite = sizeof ser->p[0].data;
ser->dev = dev;
dev->free = serdevfree;
ser->jtag = -1;
ser->nifcs = 1;
snprint(buf, sizeof buf, "vid %#06x did %#06x",
dev->usb->vid, dev->usb->did);
if(plmatch(buf) == 0){
ser->hasepintr = 1;
ser->Serialops = plops;
} else if(uconsmatch(buf) == 0)
ser->Serialops = uconsops;
else if(ftmatch(ser, buf) == 0)
ser->Serialops = ftops;
else if(slmatch(buf) == 0)
ser->Serialops = slops;
else {
werrstr("serial: no serial devices found");
return -1;
}
for(i = 0; i < ser->nifcs; i++){
p = &ser->p[i];
p->interfc = i;
p->s = ser;
p->fs = serialfs;
if(i == ser->jtag){
p->isjtag++;
}
if(findendpoints(ser, i) < 0){
werrstr("serial: no endpoints found for ifc %d", i);
return -1;
}
p->w4data = chancreate(sizeof(ulong), 0);
p->gotdata = chancreate(sizeof(ulong), 0);
}
qlock(ser);
serialreset(ser);
for(i = 0; i < ser->nifcs; i++){
p = &ser->p[i];
dprint(2, "serial: valid interface, calling serinit\n");
if(serinit(p) < 0){
dprint(2, "serial: serinit: %r\n");
return -1;
}
dsprint(2, "serial: adding interface %d, %p\n", p->interfc, p);
if(p->isjtag){
snprint(p->name, sizeof p->name, "jtag");
dsprint(2, "serial: JTAG interface %d %p\n", i, p);
snprint(p->fs.name, sizeof p->fs.name, "jtag%d.%d", devid, i);
} else {
snprint(p->name, sizeof p->name, "eiaU");
if(i == 0)
snprint(p->fs.name, sizeof p->fs.name, "eiaU%d", devid);
else
snprint(p->fs.name, sizeof p->fs.name, "eiaU%d.%d", devid, i);
}
fprint(2, "%s...", p->fs.name);
p->fs.dev = dev;
incref(dev);
p->fs.aux = p;
p->fs.end = serialfsend;
usbfsadd(&p->fs);
}
qunlock(ser);
return 0;
}
|